X

[PROJEKT] SH4-Linux-Portierung auf Opticum 9600HDTS

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • satspyvk
    Neuer Benutzer
    • 22.01.2010
    • 3

    #46
    Zitat von corev Beitrag anzeigen
    Hi!
    Thanks for the offer but c knowledge is mandatory

    corev
    Ok, i understand.

    If you need alpha/beta tester, please let me know.

    Cheers !

    Kommentar

    • satspyvk
      Neuer Benutzer
      • 22.01.2010
      • 3

      #47
      project dead ?!?

      Kommentar

      • ergin_old
        Neuer Benutzer
        • 27.12.2010
        • 2

        #48
        help wanted

        I have an opticum ts9600, i wanted to bring it again into life with Jtag. I have used the explenation from nachfalke for
        jtag 9600 , but the file inside this zip is for 9600s not for the 9600ts, so I flashed the whole 8MB and thereafter Over the serial again the firmware for TS . After sending the firmware until the end box stops with E-02
        if you have a bootloader or full flashdump from 9600ts can u upload it.
        thanks in advance
        (or send as private e-mail)

        Kommentar

        • ergin_old
          Neuer Benutzer
          • 27.12.2010
          • 2

          #49
          ergänzung zur hilfe

          Ich brauche nur original bootloader für jtag als binary dump, anscheinend macht der bootloader von 9600 s ein validity check und flashen wird abgebrochen
          danke im voraus

          Kommentar

          • pop_eye
            Neuer Benutzer
            • 30.07.2008
            • 47

            #50
            @Corev

            Wie haben sie die opticum GPIO und tuner I2C-Adresse ?
            Haben sie ein bestimmtes Programm über JTAG-Schnittstelle FT2232H?

            vielen Dank

            Kommentar

            • audioniek
              Developer
              • 22.05.2010
              • 37

              #51
              Zitat von satspyvk Beitrag anzeigen
              project dead ?!?
              NEIN! (or preferably: NO!)

              Although it has been 8 years since corev added things to this project this thing is not dead (yet). I have picked up on it after noticing that there are a lot of these receivers around and can be bought at very reasonable prices second hand. I meanwhile have both a HD 9600 and a HD TS 9600.

              The first thing I did is building the boot loader developed by corev and flash it into my HD 9600 using JTAG. That went OK. With the help of the other important info at the start of this thread I could piece together a kernel config and got the kernel going pretty soon as well. In the mean time I have modified the boot loader a bit to enable it to load the image in Fortis style (that is the USB stick is formatted in FAT32 and only needs one partition, and also holds just three files in this case: uImage, bootmenu.lst and root.img).

              The next thing done was a driver for the DVB-S(2) front end. It took me a while to gather all info needed, but the front end driver is going OK for quite some time now. I so far have not been able to find a driver for the DVB-T tuner of the TS models. So far I have gathered it is closed source and it is also very low on the list of my priorities, as in most parts of the world DVB-T is switching or has switched to DVB-T2.

              The remote control proved to be the same as the one use for the Atemio AM 520HD as this box was built by the same OEM.

              In short: I have currently Neutrino running on the box, booting via a USB stick, as the flash memory is too small (8 Mbyte) to hold any image other than the factory firmware. Neutrino does everything I want and is fully functional, but for one essential thing: I do not have a picture, nor sound.

              What I do have is this:
              • I can zap to any channel I want to;
              • After that, Neutrino shows a correct info banner (except resolution and aspect ratio), the EPG gets filled, the time synchronizes;
              • Teletext and teletext subtitles work;
              • DVB subtitles do not work;
              • Menus work.

              At the moment I am a bit stuck. Here is the complete serial log with printk enabled of a startup from power on to the final display of the info banner on Neutrino:

              Code:
              Board: Opticum HD (TS) 9600 [29-bit mode]
              
              
              U-Boot 1.3.1 (Feb 3 2021 - 18:47:03) - stm24_0057
              
              DRAM: 128 MiB
              flash_protect ON: from 0xA0000000 to 0xA00256A3
              flash_protect ON: from 0xA0040000 to 0xA004FFFF
              NOR: 8 MiB
              
              In: serial
              Out: serial
              Err: serial
              response timeout
              stopping USB..
              (Re)start USB...
              USB: scanning bus for devices... 2 USB Device(s) found
              scanning bus for storage devices... 1 Storage Device(s) found
              reading bootmenu.lst
              
              770 bytes read
              Booting enigma2.
              Hit any key to stop autoboot: 0
              reading uImage
              ................................................................................
              ................................................................................
              ................................................................................
              ................................................................................
              ...................................................
              
              3808837 bytes read
              ## Booting image at 88000000 ...
              Image Name: Linux-2.6.32.71_stm24_0217
              Image Type: SuperH Linux Kernel Image (gzip compressed)
              Data Size: 3808773 Bytes = 3.6 MiB
              Load Address: 84001000
              Entry Point: 84002000
              Verifying Checksum ... OK
              Uncompressing Kernel Image ... OK -> start kernel
              
              Starting kernel console=ttyAS0,115200 init=/bin/devinit rw coprocessor_mem=4m@0x
              10000000,4m@0x10400000 printk=1 console_loglevel=7 root=/dev/sda1/root.img nwhwc
              onf=device:eth0,hwaddr:00:25:ff:8d:bf:38 rootfstype=ext3 rootdelay=3 - 0x0000000
              0 - 0 ...
              
              Linux version 2.6.32.71_stm24_0217 (ndv@E2-BUILD-PC) (gcc version 4.8.4 20141219
              (STMicroelectronics/Linux Base 4.8.4-139) (GCC) ) #1 PREEMPT Fri Oct 8 13:42:26
              CEST 2021
              Boot params:
              ... MOUNT_ROOT_RDONLY - 00000001
              ... RAMDISK_FLAGS - 00000000
              ... ORIG_ROOT_DEV - 00000200
              ... LOADER_TYPE - 00000000
              ... INITRD_START - 00000000
              ... INITRD_SIZE - 00000000
              Booting machvec: Opticum HD (TS) 9600
              Node 0: start_pfn = 0x4000, low = 0xc000
              Zone PFN ranges:
              Normal 0x00004000 -> 0x0000c000
              Movable zone start PFN for each node
              early_node_map[1] active PFN ranges
              0: 0x00004000 -> 0x0000c000
              Opticum HD (TS) 9600
              STx7109 version 3.x
              Chip version 3.2
              bpa2: partition 'LMI_VID' created at 0x10800000, size 57344 kB (0x03800000 B)
              bpa2: partition 'LMI_SYS' created at 0x0462b000, size 36864 kB (0x02400000 B)
              Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
              Kernel command line: console=ttyAS0,115200 init=/bin/devinit rw coprocessor_mem=
              4m@0x10000000,4m@0x10400000 printk=1 console_loglevel=7 root=/dev/sda1/root.img
              nwhwconf=device:eth0,hwaddr:00:25:ff:8d:bf:38 rootfstype=ext3 rootdelay=3
              PID hash table entries: 512 (order: -1, 2048 bytes)
              Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
              Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
              PVR=04061100 CVR=30480000 PRR=00009300
              I-cache : n_ways=2 n_sets=256 way_incr=8192
              I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
              D-cache : n_ways=2 n_sets=512 way_incr=16384
              D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
              Memory: 87636k/131072k available (2555k kernel code, 725k data, 1880k init)
              SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
              Hierarchical RCU implementation.
              NR_IRQS:600
              console [ttyAS0] enabled
              sh_tmu: TMU0 used for clock events
              sh_tmu: TMU0 used for periodic clock events
              sh_tmu: TMU1 used as clock source
              Calibrating delay loop... 263.16 BogoMIPS (lpj=526336)
              Mount-cache hash table entries: 512
              CPU: STx7109
              devtmpfs: initialized
              NET: Registered protocol family 16
              bio: create slab <bio-0> at 0
              SCSI subsystem initialized
              Generic PHY: Registered new driver (0xffffffff)
              usbcore: registered new interface driver usbfs
              usbcore: registered new interface driver hub
              usbcore: registered new device driver usb
              DMA: Registering DMA API.
              Switching to clocksource TMU1
              NET: Registered protocol family 2
              IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
              TCP established hash table entries: 4096 (order: 3, 32768 bytes)
              TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
              TCP: Hash tables configured (established 4096 bind 4096)
              TCP reno registered
              NET: Registered protocol family 1
              RPC: Registered udp transport module.
              RPC: Registered tcp transport module.
              RPC: Registered tcp NFSv4.1 backchannel transport module.
              Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
              Slow work thread pool: Starting up
              Slow work thread pool: Ready
              msgmni has been set to 171
              io scheduler noop registered
              io scheduler anticipatory registered (default)
              STMicroelectronics ASC driver initialized
              stm-asc.0: ttyAS0 at MMIO 0x18032000 (irq = 121) is a stm-asc
              stm-asc.1: ttyAS1 at MMIO 0x18033000 (irq = 120) is a stm-asc
              brd: module loaded
              loop: module loaded
              physmap platform flash device: 00800000 at 00000000
              physmap-flash: Found 1 x16 devices at 0x0 in 16-bit bank
              Amd/Fujitsu Extended Query Table at 0x0040
              number of CFI chips: 1
              cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
              cmdlinepart partition parsing not available
              RedBoot partition parsing not available
              DWMAC100
              No HW DMA feature register supported
              Normal descriptors
              STMMAC MII Bus: probed
              eth0: PHY ID 0fffffff at 1 IRQ 0 (0:01)
              eth0: PHY ID 0fffffff at 2 IRQ 0 (0:02)
              eth0: PHY ID 1c040011 at 6 IRQ 11 (0:06) active
              eth0: PHY ID 0fffffff at 7 IRQ 0 (0:07)
              eth0: PHY ID 0fffffff at 9 IRQ 0 (0:09)
              eth0: PHY ID 0fffffff at 15 IRQ 0 (0:0f)
              eth0: PHY ID 0fffffff at 16 IRQ 0 (0:10)
              eth0: PHY ID 0fffffff at 18 IRQ 0 (0:12)
              eth0: PHY ID 0fffffff at 22 IRQ 0 (0:16)
              eth0: PHY ID 0fffffff at 23 IRQ 0 (0:17)
              eth0: PHY ID 0fffffff at 25 IRQ 0 (0:19)
              eth0: PHY ID 0fffffff at 26 IRQ 0 (0:1a)
              nwhw_config: (eth0) setting mac address: 00:25:ff:8d:bf:38
              ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
              ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
              stm_usb_probe: usb_48_clk clock not found for stm-usb.0
              stm_usb_probe: usb_phy_clk clock not found for stm-usb.0
              stm-ehci stm-ehci.0: STMicroelectronics EHCI Host Controller
              stm-ehci stm-ehci.0: new USB bus registered, assigned bus number 1
              stm-ehci stm-ehci.0: irq 169, io mem 0x191ffe00
              stm-ehci stm-ehci.0: USB 0.0 started, EHCI 1.00
              usb usb1: configuration #1 chosen from 1 choice
              hub 1-0:1.0: USB hub found
              hub 1-0:1.0: 1 port detected
              stm-ohci stm-ohci.0: STMicroelectronics OHCI Host Controller
              stm-ohci stm-ohci.0: new USB bus registered, assigned bus number 2
              stm-ohci stm-ohci.0: irq 168, io mem 0x191ffc00
              usb usb2: configuration #1 chosen from 1 choice
              hub 2-0:1.0: USB hub found
              hub 2-0:1.0: 1 port detected
              Initializing USB Mass Storage driver...
              usbcore: registered new interface driver usb-storage
              USB Mass Storage support registered.
              i2c /dev entries driver
              i2c_st40_pio: ST40 PIO based I2C Driver for STM24
              Linux video capture interface: v2.00
              sh_tmu: TMU0 kept as earlytimer
              sh_tmu: TMU1 kept as earlytimer
              STMicroelectronics - Coprocessors st231 Init
              st231.0 Coprocessor -------------------------------------------
              flags 0001 RAM start at 0xb0000000 size 0x00400000
              cop. addr 0x10000000
              Channels : Not defined
              IRQ : not used
              ---------------------------------------------------------------
              st231.1 Coprocessor -------------------------------------------
              flags 0001 RAM start at 0xb0400000 size 0x00400000
              cop. addr 0x10400000
              Channels : Not defined
              IRQ : not used
              ---------------------------------------------------------------
              DMA: Registering fdma_dmac handler (16 channels).
              IRQ 140/fdma_dmac: IRQF_DISABLED is not guaranteed on shared IRQs
              stm-fdma stm-fdma: firmware: using built-in firmware fdma_STx7109_0.elf
              stm-rng hardware driver 1.0 configured
              platform fdma_dmac: SLIM hw 0.0, FDMA fw 4.6
              Advanced Linux Sound Architecture Driver Version 1.0.21.
              ALSA device list:
              #0: STMicroelectronics STx7109 cut 3.2 SOC audio subsystem
              TCP cubic registered
              NET: Registered protocol family 10
              NET: Registered protocol family 17
              Freeing unused kernel memory: 1880k freed  -> mount rootfs
              
              --={ Load Image rootfs from USB }=--
              
              usb 1-1: new high speed USB device using stm-ehci and address 2
              [init] Wait until /dev/sda exists
              usb 1-1: configuration #1 chosen from 1 choice
              scsi0 : SCSI emulation for USB Mass Storage devices
              usb-storage: wait 5 seconds on usb port 1
              scsi 0:0:0:0: Direct-Access Philips USB Flash Drive 3000 PQ: 0 ANSI: 0 CCS
              sd 0:0:0:0: [sda] 1014784 512-byte logical blocks: (519 MB/495 MiB)
              sd 0:0:0:0: [sda] Write Protect is off
              sd 0:0:0:0: [sda] Assuming drive cache: write through
              sd 0:0:0:0: [sda] Assuming drive cache: write through
              sda: sda1
              sd 0:0:0:0: [sda] Assuming drive cache: write through
              sd 0:0:0:0: [sda] Attached SCSI removable disk
              [init] ...found, mounting /dev/sda1
              [init] Check root.img
              neutrino: clean, 2554/65536 files, 62541/262144 blocks
              [init] Mount root.img
              kjournald starting. Commit interval 5 seconds
              EXT3 FS on loop0, internal journal
              EXT3-fs: mounted filesystem with writeback data mode.
              [init] Start Image  --> execute rcS
              INIT: version booting
              [rcS] Start
              Opticum HD (TS) 9600 Neutrino
              [rcS] Init portmap & ftp
              Starting portmap daemon....
              Starting FTP server: vsftpd.
              [mountvirtfs] Mount /dev in tmpfs
              [mountvirtfs] Copying device nodes to /dev
              Starting portmap daemon...Already running..
              Starting automounter: /media/usb.
              [rcS] Starting DEBUG Interface
              [mountall] Mounting local filesystems...
              mount: mounting LABEL=RECORD on /hdd failed: No such file or directory
              Cleaning /tmp.
              Hostname: opt9600.
              Deconfiguring network interfaces... ifdown: interface lo not configured
              ifdown: interface eth0 not configured
              ifdown: interface eth1 not configured
              ifdown: interface wlan0 not configured
              done.
              Setting up IP spoofing protection: rp_filter.
              Configuring network interfaces... eth0: device MAC address 00:25:ff:8d:bf:38
              No MAC Management Counters available
              udhcpc: started, v1.34.0
              udhcpc: broadcasting discover
              udhcpc: broadcasting select for 192.168.178.101, server 192.168.178.1
              udhcpc: lease of 192.168.178.101 obtained from 192.168.178.1, lease time 1209600
              route: SIOCDELRT: No such process
              adding dns 192.168.178.1
              ip: SIOCGIFFLAGS: No such device
              ip: SIOCGIFFLAGS: No such device
              done.
              [rcS] No WLAN
              [rcS] Set internet time
              PHY: 0:06 - Link is Up - 100/Full -> wired Network is OK
              ntpd: setting time to 2021-10-09 14:14:37.544198 (offset +687096857.580508s)
              [rcS] Init frontpanel
              Opticum HD 9600 frontcontroller module
              [opt9600_fp] Front panel time 15:43:00 01-01-2000
              [opt9600_fp] Front panel version = 2.99.11
              [simu_button] initializing ...
              [simu_button] allocating and registering button device
              input: TDT RC event driver as /devices/virtual/input/input0
              [rcS] Set front panel time (LOAD 10)
              Current system t[opt9600_fp] MJD = 4294961256
              ime: 14:14:38 09[opt9600_fp] FP time to set: 14:14:38 09-10-2021
              -10-2021 (local)[opt9600_fp] FP time: MJD = 59496, 14:14:38
              
              Front panel time set to: 14:14:38 09-10-2021 (local)
              Write rtc_offset: Bad file descriptor
              [rcS] Starting telnetd
              [rcS] Init stmfb (LOAD 9)
              [stmcore-display] STx7109c3 display: probed
              device probe found 2 display pipelines
              stmfb: fb0 parameters = "1280x720-32@50:12M:0al:cvbs:rgb"
              stmfb: Starting HDMI Output hdmi = 8b960000
              stmfb: fb1 parameters = "<NULL>"
              [rcS] Loading modules
              [rcS] Load video firmware (LOAD 8)
              [rcS] Load audio firmware (LOAD 7)
              [rcS] Init embx (LOAD 6)
              [rcS] Init AVS (LOAD 5)
              [avs] A/V switch handling for avs_none
              [rcS] Init player 191 (LOAD 4)
              Init of MME log wrapper
              STx71XX MPEG2 hardware host transformer loaded
              snd_pseudo snd_pseudo.0: firmware: requesting downmix.fw
              pseudocard: 1 pseudo soundcard(s) found
              [rcS] Init frontend(s)
              [rcS] Init CI
              Module starci2win loaded
              pti: module license 'NO' taints kernel.
              Disabling lock debugging due to kernel taint
              [pti] pti loaded (videoMem = 4096, waitMS = 20, enableStatistic = 0)
              [rcS] Full feature pti
              [player2] no swts ->routing streams from dvr0 direct to the player
              DVB: registering new adapter (STM Streamer)
              0: DeviceContext 8b8ae088, DvbDemux 8b8ae38c, DmxDevice 8b8ae574
              [player2] CaInit >
              [player2] Initializing CI Controller
              [starci2win] ioremap 0x1a100000 -> 0xba100000 -> this is probably wrong
              [starci2win] ioremap 0x1a100800 -> 0xba100800 -> this is probably wrong
              [starci2win] init_ci_controller: Allocating PIO pins successful
              [starci2win] init_ci_controller: Initializing StarCI2Win
              [starci2win] starci_writereg: reg=0x1f, value=0x80
              [starci2win] starci_writereg: reg=0x1f, value=0x01
              [starci2win] init_ci_controller: Initializing StarCI2Win
              [starci2win] starci_writereg: reg=0x18, value=0x21
              [starci2win] init_ci_controller: call dvb_ca_en50221_init
              [starci2win] ca0 interface initialised.
              [starci2win] init_ci_controller: < Error = 0
              ptiInit context = 8b8ae088, demux = 8b8ae38c
              [TSM] init stream routing...
              Routing streams through cimax
              [pti] Load real TC Code
              [pti] TC_Data = b9238000, TC_Code = b923c000
              [pti] Readback TC ... successful.
              [pti] using videoMem = 770048 (packets = 4096)
              [pti] pti_buffer_pool_init: allocate 188 pages (770048 bytes)
              [pti] DMA(0) base = 525b000, top = 5317000, buffer = 525b000, size 770048
              [pti] freeBuffer(): free = 1
              [pti] pti_buffer_pool_init: allocate 188 pages (770048 bytes)
              [pti] DMA(1) base = 5317000, top = 53d3000, buffer = 5317000, size 770048
              [pti] freeBuffer(): free = 2
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] pti_task: using 2 dma channel
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              [pti] Validity = 0x0001 Mode = 0x0000
              [pti] Validity = 0x0003 Mode = 0x0000
              DVB: registering adapter 0 frontend 0 (Availink AVL2108 DVB-S2)...
              Free session: 0
              Using session 0
              pti_hal_get_new_descrambler (40000) >
              pti_hal_get_new_descrambler (40001) >
              pti_hal_get_new_descrambler (40002) >
              pti_hal_get_new_descrambler (40003) >
              pti_hal_get_new_descrambler (40004) >
              Descrambler Handler = 40000
              install_e2_procs(): entry already in use 'progress'
              install_e2_procs(): entry already in use 'stb/fp/was_timer_wakeup'
              1: DeviceContext 8b8ae610, DvbDemux 8b8ae914, DmxDevice 8b8aeafc
              [player2] CaInit >
              ptiInit context = 8b8ae610, demux = 8b8ae914
              Free session: 1
              Using session 1
              pti_hal_get_new_descrambler (41000) >
              pti_hal_get_new_descrambler (41001) >
              pti_hal_get_new_descrambler (41002) >
              pti_hal_get_new_descrambler (41003) >
              pti_hal_get_new_descrambler (41004) >
              Descrambler Handler = 41000
              2: DeviceContext 8b8aeb98, DvbDemux 8b8aee9c, DmxDevice 8b8af084
              [player2] CaInit >
              ptiInit context = 8b8aeb98, demux = 8b8aee9c
              convert_source(): invalid frontend source (2)
              Free session: 2
              Using session 2
              pti_hal_get_new_descrambler (42000) >
              pti_hal_get_new_descrambler (42001) >
              pti_hal_get_new_descrambler (42002) >
              pti_hal_get_new_descrambler (42003) >
              pti_hal_get_new_descrambler (42004) >
              Descrambler Handler = 42000
              3: DeviceContext 8b8af120, DvbDemux 8b8af424, DmxDevice 8b8af60c
              ptiInit context = 8b8af120, demux = 8b8af424
              convert_source(): invalid frontend source (3)
              pti_hal_get_new_descrambler (-2) >
              pti_hal_get_new_descrambler (-2) >
              pti_hal_get_new_descrambler (-2) >
              pti_hal_get_new_descrambler (-2) >
              pti_hal_get_new_descrambler (-2) >
              Descrambler Handler = -2
              stm_v4l2_register_driver: driver 'Linux DVB Overlay' registered
              [rcS] Init player2 (LOAD 3)
              OSDEV_LinkDevice - /dev/allocator, Major 245, Minor 0
              AllocatorLoadModule : Allocator device loaded
              Switching Preprocessor clock to full speed.
              Platform STx7109 - cut 3
              OSDEV_LinkDevice - /dev/h264pp, Major 246, Minor 0
              H264ppLoadModule : H264pp device loaded
              [bpamem] bpamem_init: BPAMem driver register result = 0
              [rcS] Init cardreader
              Registering device 'sc', major '169'
              Version of smartcard driver: [1.0.1]
              [rcS] Load extra modules (LOAD 2)
              [rcS] Init NTFS support
              NTFS driver 2.1.29 [Flags: R/W MODULE].
              [rcS] Init tun support
              tun: Universal TUN/TAP device driver, 1.6
              tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
              usbcore: registered new interface driver usbserial
              USB Serial support registered for generic
              usbcore: registered new interface driver usbserial_generic
              usbserial: USB Serial Driver core
              USB Serial support registered for ch341-uart
              usbcore: registered new interface driver ch341
              [rcS] Init FTDI USB serial support
              USB Serial support registered for FTDI USB Serial Device
              usbcore: registered new interface driver ftdi_sio
              ftdi_sio: v1.5.0:USB FTDI Serial Converters Driver [sh4-Mod v0.06]
              [rcS] Init PL2303 USB serial support
              USB Serial support registered for pl2303
              usbcore: registered new interface driver pl2303
              pl2303: Prolific PL2303 USB to serial adaptor driver
              [rcS] Init remote control (LOAD 1)
              [rcS] Start neutrino
              [evremote2] Model: 'opt9600'
              [evremote2] vBoxType: 16 (opt9600)
              [evremote2] Input device name: "TDT RC event driver"
              [evremote2] Remote selected: Crenova Remote2 RemoteControl
              [evremote2] RemoteControl Map:
              Keyname Keyword KeyCode
              --------------------------------------
              POWER - 5F - 116
              MUTE - 57 - 113
              HELP - 11 - 138
              TV_FORMAT - 07 - 372
              TVRADIO - 14 - 378
              MODE - 1a - 227
              1 - 56 - 2
              2 - 5A - 3
              3 - 5E - 4
              4 - 55 - 5
              5 - 59 - 6
              6 - 5D - 7
              7 - 54 - 8
              8 - 58 - 9
              9 - 5C - 10
              MENU - 4A - 139
              0 - 1B - 11
              RECALL - 15 - 158
              REWIND - 1E - 168
              STOP - 10 - 128
              PLAYPAUSE - 12 - 164
              FASTFORWARD - 01 - 208
              RECORD - 1C - 167
              UP - 18 - 103
              EXIT - 1D - 174
              LEFT - 41 - 105
              OK - 45 - 352
              RIGHT - 49 - 106
              INFO - 06 - 358
              DOWN - 46 - 108
              EPG - 09 - 365
              ARCHIVE - 17 - 144
              SLOW - 0D - 409
              PREVIOUS - 02 - 412
              NEXT - 42 - 407
              RED - 5B - 398
              GREEN - 1F - 399
              YELLOW - 08 - 400
              BLUE - 03 - 401
              FAV - 00 - 364
              STATUS - 0C - 138
              OPTION - 19 - 388
              FIND - 16 - 370
              VOLUMEUP - 22 - 115
              VOLUMEDOWN - 23 - 114
              CHANNELUP - 20 - 402
              CHANNELDOWN - 21 - 403
              PLUGIN - 60 - 25
              PAUSE - 13 - 119
              AUDIO - 61 - 392
              SHOOT - 62 - 31
              WWW - 63 - 150
              SLEEP - 24 - 362
              --------------------------------------
              [evremote2] Supports Long KeyPress: yes
              [starci2win] starci_poll_slot_status (slot 0; open = 0) >
              [starci2win] starci_readreg reg=0x00, value=0x00
              [starci2win] Module A (0): result = 0x00, status = 1
              [starci2win] starci_poll_slot_status (slot 1; open = 0) >
              [starci2win] starci_readreg reg=0x09, value=0x00
              [starci2win] Module B (1): result = 0x00, status = 1
              [evremote2 cnbox] Period = 10, delay = 150
              [evremote2] Using period = 10 delay = 150
              [ca_ci] -> GetInstance -> First Neutrino log
              [ca_ci] -> cCA 2
              [starci2win] starci_poll_slot_status (slot 0; open = 1) >
              [starci2win] starci_readreg reg=0x00, value=0x00
              [starci2win] Module A (0): result = 0x00, status = 1
              [starci2win] starci_slot_shutdown: slot = 0
              [starci2win] starci_poll_slot_status (slot 0; open = 1) >
              [starci2win] starci_readreg reg=0x00, value=0x00
              [starci2win] Module A (0): result = 0x00, status = 1
              [starci2win] starci_poll_slot_status (slot 1; open = 1) >
              [starci2win] starci_readreg reg=0x09, value=0x00
              [starci2win] Module B (1): result = 0x00, status = 1
              [starci2win] starci_poll_slot_status (slot 0; open = 1) >
              [starci2win] starci_readreg reg=0x00, value=0x00
              [starci2win] Module A (0): result = 0x00, status = 1
              [starci2win] starci_poll_slot_status (slot 1; open = 1) >
              [starci2win] starci_readreg reg=0x09, value=0x00
              [starci2win] Module B (1): result = 0x00, status = 1
              [starci2win] starci_poll_slot_status (slot 0; open = 1) >
              [starci2win] starci_readreg reg=0x00, value=0x00
              [starci2win] Module A (0): result = 0x00, status = 1
              [starci2win] starci_poll_slot_status (slot 1; open = 1) >
              [starci2win] starci_readreg reg=0x09, value=0x00
              [starci2win] Module B (1): result = 0x00, status = 1
              [starci2win] starci_slot_shutdown: slot = 1
              [starci2win] starci_poll_slot_status (slot 1; open = 1) >
              [starci2win] starci_readreg reg=0x09, value=0x00
              [starci2win] Module B (1): result = 0x00, status = 1 -> No CI modules in the slots (is correct)
              >>> Neutrino (compiled Oct 8 2021 13:57:07) <<<
              libstb-hal debug options can be reset_tsm: 1 numRunningFeeds: 0 => calling stm_t
              sm_init(1)
              set by exporting[TSM] reinit stream routing...
              HAL_DEBUG.
              TheRouting streams through cimax
              following valueLinuxDvbvbPlaybackCreate: Playback 8946e220
              s (or bitwise OR[pti] getBuffer(): free = 2
              combinations) a[pti] pti_buffer_get(77004 => 8b985f28
              re valid:
              comp(da 0, 0)onent: audio 0[pti] pti_buffer_free(8b985f28, 77004 - d
              elta 0x 0, thr 0x1
              x01
              component:[pti] freeBuffer(): free = 2
              video 0x02
              component: demux 0x04
              component: play 0x08
              component: power 0x10
              component: init 0x20
              component: ca 0x40
              component: record 0x80
              all components: 0xff
              [HAL:00000000:init ] hal_api_init begin, initialized=0, debug=0x00
              [HAL:00000000:init ] hal_api_init end
              [neutrino] frameBuffer Instance created
              12288k video mem
              [bpamem] bpamemio_allocmem: data.bpa_part = LMI_SYS
              
              CFrameBuffer::setMode avail: 12582912 active: 1
              FB: 1280x720x32 line length 5120.
              [neutrino] executing /var/tuxbox/control/neutrino.start
              [neutrino] control script missing /var/tuxbox/control/neutrino.start
              
              [HAL:00000000:init ] hal_api_init begin, initialized=1, debug=0x00
              [HAL:00000000:init ] hal_api_init end
              
              [english.locale] superfluous entry: moviebrowser.scan_for_videos
              [ca_ci] -> GetNumberCISlots
              [ca_ci] -> GetNumberCISlots
              [ca_ci] -> GetNumberCISlots
              [ca_ci] -> GetNumberCISlots
              [ca_ci] -> GetNumberCISlots
              [ca_ci] -> GetNumberCISlots -> why does this happen multiple times?
              [neutrino] recording dir: /media/sda1/movie
              [neutrino] timeshift dir: /media/sda1/movie/.timeshift
              [timerd] wakeup from standby: no
              [neutrino] executing /var/tuxbox/control/deepstandby.off
              [neutrino] control script missing /var/tuxbox/control/deepstandby.off
              
              [neutrino CEC Settings] setCECSettings init CEC settings...
              [neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 169] font file: /usr/share/fon
              ts/neutrino.ttf
              [neutrino] [CNeutrinoFonts] [SetupNeutrinoFonts - 191] standard font family: Ari
              al Narrow
              [neutrino] [CNeutrinoFonts] [SetupDynamicFonts - 151] dynamic font family: Arial
              Narrow
              CVFD::setlcdpara[opt9600_fp] VFDBRIGHTNESS not supported on this receiver
              meter dimm 7 power 1
              CVFD::ShowScrollText: [ ]
              CVFD::ShowScrollText: [Tuxbox-Neutrino 3.9.0 starting ...]
              CVFD::ThreadScrollText: [Tuxbox-Neutrino 3.9.0 starting ...], length 34
              i2c i2c-1: sendbytes: NAK bailout.
              [avl2108] avl2108_i2c_writereg Error: -5, size 7
              i2c i2c-1: firmware: requesting dvb-fe-avl2108.fw
              [fe0/0] frontenddtv_property_dump: tvp.cmd = 0x0000002c undefined
              fd 12 type 0
              [frontend.cpp:getFEInfo:266] ioctl(fd, FE_GET_PROPERTY, &cmdseq): Operation not
              permitted
              WARNING: can't query delivery systems on frontend 0/0 - falling back to legacy m
              ode
              [femanager.cpp:Init:104] add fe 0
              [frontend.cpp:Open:198] /dev/dvb/adapter0/frontend1: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter0/frontend2: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter0/frontend3: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter1/frontend0: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter1/frontend1: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter1/frontend2: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter1/frontend3: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter2/frontend0: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter2/frontend1: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter2/frontend2: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter2/frontend3: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter3/frontend0: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter3/frontend1: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter3/frontend2: No such file or directory
              [frontend.cpp:Open:198] /dev/dvb/adapter3/frontend3: No such file or directory
              [femanager.cpp:Init:120] found 1 frontends, 4 demuxes
              
              [zapit] Loading services, channel size 248 ..
              [getservices.cpp:LoadServices:887] Loading satellites...
              [getservices.cpp:FindTransponder:595] going to parse dvb-s provider 13.0E Hotbir
              d 13B/13C/13E
              [getservices.cpp:FindTransponder:595] going to parse dvb-s provider 19.2E Ku-ban
              d Astra 1KR/1L/1M/1N
              [getservices.cpp:FindTransponder:595] going to parse dvb-s provider 23.5E Astra
              3B
              [getservices.cpp:FindTransponder:595] going to parse dvb-s provider 28.2E Astra
              2E/2F/2G
              [zapit] 3041 services loaded (3041)...
              [zapit] service loading took: 971 msec
              [zapit.cpp:PrepareChannels:1077] LoadServices: success
              [bouquets.cpparseBouquetsXml:414] reading bouquets from /var/tuxbox/config/zap
              it/bouquets.xml
              [bouquets.cpparseBouquetsXml:515] total: 134 bouquets
              [bouquets.cpp:loadWebchannels:888] Loading webtv from /var/tuxbox/config/webtv_u
              sr.xml ...
              [bouquets.cpp:loadWebchannels:888] Loading webradio from /var/tuxbox/config/webr
              adio_usr.xml ...
              [bouquets.cpparseBouquetsXml:414] reading bouquets from /var/tuxbox/config/zap
              it/ubouquets.xml
              [bouquets.cpparseBouquetsXml:515] total: 144 bouquets
              ############## CBouquetManager::makeRemainingChannelsBouquet: numbers start at:
              tv 1 radio 1 ############
              [zapit] bouquet loading took: 783 msec
              CServiceManager::SaveServices: total channels: 3052
              [starci2win] starci_poll_slot_status (slot 0; open = 1) >
              [starci2win] starci_readreg reg=0x00, value=0x00
              [starci2win] Module A (0): result = 0x00, status = 1
              [starci2win] starci_poll_slot_status (slot 1; open = 1) >
              [starci2win] starci_readreg reg=0x09, value=0x00
              [starci2win] Module B (1): result = 0x00, status = 1
              CServiceManager::SaveServices: processed channels: 3041
              [zapit.cpp:Start:2503] channels have been loaded succesfully
              [zapit.cpp] diseqc type = 3
              [femanager.cpp:loadSettings:248] load config for fe0
              [femanager.cpp:linkFrontends:428] linking..
              [femanager.cpp:linkFrontends:479] Frontend #0: is independent
              [frontend.cpp:setDiseqcType:1667] fe0: DISEQC_1_0
              [fe0/0] diseqc reset
              [fe0/0] Diseqc cmd: 0xE0 0x0 0x0
              [fe0/0] diseqc power on
              [fe0/0] Diseqc cmd: 0xE0 0x0 0x3
              [femanager.cpp:linkFrontends:496] pip demux: 2
              [ca_ci] -> SetInitMask param:3
              [ca_ci] -> GetNumberCISlots
              [ca_ci] -> SetTSClock to: high
              [ca_ci] -> proc_hdmi_audio_source_write 3 - GetNumberCISlots
              [ca_cipcm
              ] -> SetTSClock to: high
              [ca_ci] -> GetNumberCIstmhdmiio_set_audio_source - 8b960000
              Slots
              [ca_ci] -> Start
              [zapit] GetConfFind spdif_bypass control at 8bae6600
              ig...
              [zapit] starting.Found mode to set 720p50 at 21
              .. tid 1222
              [zaFound mode to set 720p50 at 21
              pit] sdt monitor started
              [neutrFound mode to set 720p50 at 21
              ino VideoSettingFound mode to set 720p50 at 21
              s] setupVideoSystem setuFound mode to set 1080p25 at 14
              p videosystem...
              [fb]::stmfb: Starting HDMI Output hdmi = 8b960000
              getFileHandle: WARNING, this should never be used, please report!
              >>>>>[osd_helpers.cpp - setVideoSystem:205] before SetVideoSystem:
              var.xres : 1280, var.yres : 720, var.yres_virtual: 7
              20
              fix.line_length : 5120, fix.smem_len: 12582912 Byte
              [HAL:00874c18:video ] SetVideoSystem: old: '720p50' new: '1080p25'
              [HAL:00000000:video ] hdmi_out(0)
              [HAL:00000000:vistmfb: Starting HDMI Output hdmi = 8b960000
              deo ] hdmi_out(1)
              >>>>>[osd_helpers.cpp - setVideoSystem:218] after SetVideoSystem:
              var.xres : 1920, var.yres : 1080, var.yres_virtual: 10
              80
              fix.line_length : 7680, fix.smem_len: 12582912 Byte
              [neutrino VideoSettings] setVideoSettings init video settings...
              Can't set policy, VideoStream NULL
              [rcinput:checkdev] /dev/input mtime changed
              [rcinputpen] open /dev/input/js2 failed: No such device
              [rcinputpen] open /dev/input/event1 failed: No such device
              [rcinputpen] open /dev/input/event3 failed: No such device
              [rcinputpen] open /dev/input/mouse0 failed: No such device
              [rcinputpen] open /dev/input/event2 failed: No such device
              [rcinputpen] open /dev/input/mouse1 failed: No such device
              [rcinputpen] open /dev/input/js0 failed: No such device
              [rcinputpen] open /dev/input/mouse2 failed: No such device
              [rcinputpen] open /dev/input/mice failed: No such device
              [rcinputpen] open /dev/input/mouse3 failed: No such device
              [rcinputpen] open /dev/input/js3 failed: No such device
              [rcinputpen] opened /dev/input/event0 (fd 24) ev 0x100003
              [rcinputpen] open /dev/input/js1 failed: No such device
              [zapit.cpp:leaveStandby:2364] standby 1 recording 0
              [zapit.cpp:ZapIt:514] [zapit] zap to ITV2 (ab820806000227da tp 2a9a011a08060002)
              [zapit] GetConfig...
              [femanager.cpp:allocateFE:748] pip demux: 2
              [zapit.cpp:StopPlayBack:2298] standby 0 playing 0 forced 0 send_pmt 1
              [fe0/0] Diseqc cmd: 0xE0 0x10 0x38 0xF8
              CVFD::setlcdpara[opt9600_fp] VFDBRIGHTNESS not supported on this receiver
              meter dimm 2 power 1
              [fe0/0] Diseqc cmd: 0xE1 0x10 0x38 0xF8
              [fe0/0] tune to 10906000 DVB QPSK 5/6 V/R srate 22000000 pli -1 plc 0 plm 1 (tun
              er 1156000 offset 9750000 timeout 4000)
              [frontend.cpp:setFrontend:1521] [fe0/0] tuner pilot 2 (feparams 2)
              
              [frontend.cpp:getEvent:7[pti] pti_hal_set_source(): 0, 32
              85] [fe0/0] ****reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
              **** FE_HAS_LOCK[TSM] reinit stream routing...
              : freq 1156000
              Routing streams through cimax
              
              [fe0/0] tuning[pti] getBuffer(): free = 2
              took: 381 msec [pti] pti_buffer_get(77004 => 8b985f28
              (min 381 max 381)
              [HAL:0096e938:demux ] _open: setting /dev/dvb/adapter0/demux0 to source 0
              [pti] pti_buffer_free(8b985f28, 77004 - delta 0x 178, thr 0x1
              [pti] freeBuffer(): free = 2
              [zapit] parsing reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_init(1)
              pmt pid 0x110 (I[TSM] reinit stream routing...
              TV2)
              Routing streams through cimax
              [pti] getBuffer(): free = 2
              [pti] pti_buffer_get(77004 => 8b985f28
              [pti] pti_buffer_free(8b985f28, 77004 - delta 0x 234, thr 0x1
              [pti] freeBuffer(): free = 2
              [subtitles] DVBSub: PID=0x092f, lang=eng, cpageid=0002, apageid=0002
              [subtitle] TTXSub: PID=0x0reset_tsm: 1 numRunningFeeds: 0 => calling stm_tsm_ini
              t(1)
              92e, lang=eng, p[TSM] reinit stream routing...
              age=888
              [zapit]Routing streams through cimax
              channel found, [pti] getBuffer(): free = 2
              audio pid 0, sub[pti] pti_buffer_get(77004 => 8b985f28
              title pid 0 mode 0 volume 16
              [capmt.cpp:SetMode:239] PLAY: fe_num 0 dmx_src 0
              [capmt.cpp:SetMode:292] channel ab820806000227da [ITV2] mode 0 START src 0 mask
              0 -> 1 update 0
              [CBasicClient] connect failed.
              /tmp/camd.socket: No such file or directory
              [ca_ci] -> SendCAPMT
              TP: AB8208060002
              SID: 27DA
              SOURCE: 0
              CA_MASK: 1
              CALEN: 60
              Scrambled: 0
              Mode: 0
              Enabled: START
              [ca_ci] -> FindFreeSlot
              No free ci-slot
              CaMap Empty
              [pmt] set update filter, sid 0x27da pid 0x110 version 6
              [neutrino] g_info.has_fan: 0
              CStreamManager::Listen: on 31339, fd 23
              [yhttpd] Webserver nhttpd/3.4.1 (yhttpd_core/1.3.2) tid 1228
              Starting STREAM thread keeper, tid 1229
              [HAL:00974518:demux ] Stop #0: not open!
              timerd startup, tid 1224
              2021-10-09 14:14:59.278 [sectionsd] start
              2021-10-09 14:14:59.280 [sectionsd] Caching: 7 days, 360 hours Extended Text, ma
              x 90000 events, Events are old 1 hours after end time
              2021-10-09 14:14:59.280 [sectionsd] NTP: enabled, command /usr/sbin/ntpd -n -q -
              p time.fu-berlin.de
              2021-10-09 14:14:59.330 [sectionsd] starting
              2021-10-09 14:14:59.332 [sectionsd] SIevent size: 88
              2021-10-09 14:14:59.332 [sectionsd] ====> USING SLOW ADDEVENT. export 'NO_SLOW_A
              DDEVENT=1' to avoid <===
              2021-10-09 14:14:59.438 [sectionsd] timeThread::run:: starting, pid 1212 (858780
              792)
              2021-10-09 14:14:59.469 [sectionsd] eitThread::run:: starting, pid 1212 (8671694
              00)
              2021-10-09 14:14:59.490 [sectionsd] cnThread::run:: starting, pid 1212 (87555800
              
              2021-10-09 14:14:59.511 [sectionsd] freeSatThread::run:: starting, pid 1212 (883
              946616)
              [yhttpd] Webserver starting...
              mount: mounting /dev/sdb1 on /media/sdb1 failed: No such device or address
              [neutrino] menue setup
              [neutrino] init menus...
              [neutrino] mediaplayer menu instance created
              [ca_ci] -> GetNumberCISlots
              [network config] Instance created
              [neutrino] [CNetworkSetup] [getInstance - 90], Instance created
              [neutrino] ScanSetup Instance created
              [HAL:00900a70lay ] cPlayback
              [mb]->refreshBrowserList
              [mb]->refreshFilterList 22
              [ConfigFile] Unable to open file /var/tuxbox/config/bookmarks for reading.
              [neutrino CMoviePlayerGui] Instance created...
              [neutrino] registering as event client
              [neutrino] had to wait 0 ms for timerd s[opt9600_fp] VFDBRIGHTNESS not supported
              on this receiver
              tart...
              CVFD::setlcdparameter dimm 7 power 1
              [neutrino] Creating channels lists...
              [neutrino] got 2399 TV and 553 RADIO channels
              [neutrino] all channels took: 7 msec
              [neutrino] created 13.0E Hotbird 13B/13C/13E (130) bouquet with 576 TV and 228 R
              ADIO channels
              [neutrino] sat took: 195 msec
              [neutrino] created 19.2E Ku-band Astra 1KR/1L/1M/1N (192) bouquet with 1084 TV a
              nd 162 RADIO channels
              [neutrino] sat took: 206 msec
              [neutrino] created 23.5E Astra 3B (235) bouquet with 245 TV and 79 RADIO channel
              s
              [neutrino] sat took: 213 msec
              [neutrino] created 28.2E Astra 2E/2F/2G (282) bouquet with 494 TV and 73 RADIO c
              hannels
              [neutrino] sat took: 223 msec
              [neutrino] got 11 WebRadio channels
              [neutrino] got 89 new TV channels
              [neutrino] got 11 new RADIO channels
              [neutrino] got 150 removed TV channels
              [neutrino] got 6 removed RADIO channels
              [neutrino] sats took: 448 msec
              [neutrino] got 112 TV and 64 RADIO bouquets
              [neutrino] took: 466 msec
              [opt9600_fp] VFDICONDISPLAYONOFF not supported on this receiver
              CNeutrinoApp::SetChannelMode 0 [tv]
              [neutrino.cpp:SetChannelMode:2071] newmode 0 sort old -1 new 0
              [scanepg.cpp:ConfigureEIT:94] added 241 channels to EIT white list
              [neutrino.cpp:tvMode:4371] rezap 1 current mode 1
              CVFD::ShowScrollText: [ ]
              CVFD::ThreadScrollText: [ ]proc_stream_AV_SYNC_write 5 - , length
              16
              [CVapply
              FD] - blocked
              Cfailed to set policy
              RemoteControl::tvMode
              Cproc_stream_MASTER_CLOCK_write 5 - NeutrinoApp::Setvideo
              ChannelMode 0 [tfailed to set policy
              v]
              [neutrino.cpp:SetChannelMode:2071] newmode 0 sort old -1 new 0
              **************************** CChannelList::zapTo_ChannelID ab820806000227da
              **************************** CChannelList::zapT[starci2win] starci_poll_slot_sta
              tus (slot 0; open = 1) >
              oChannel me 0xac7590 All Services tuned 268435455 new ITV2 -> ab820806000227da
              2021-10-09 14:15:00.845 [starci2win] starci_readreg reg=0x00, value=0x00
              [sectionsd] commandserviceStopped
              2021-10-09 14:15:00.846 [sect[starci2win] Module A (0): result = 0x00, status =
              1
              ionsd] cnThread: stop eit update filter (not active)
              2021-10-09 14:15:00.846 [sectionsd] comman[starci2win] starci_poll_slot_status (
              slot 1; open = 1) >
              dserviceStopped done
              stopPlayBack: stopping...
              stopPlayBack: stopped
              [starci2win] starci_readreg reg=0x09, value=0x00
              CChannelList::adjustToChannelID me 0xac7590 [All Services] list size 2399 channe
              [starci2win] Module B (1): result = 0x00, status = 1
              l_id ab820806000227da
              [zapit.cpp:ZapIt:514] [zapit] zap to ITV2 (ab820806000227da tp 2a9a011a08060002)
              [zapit] saving channel, apid 92d sub pid ffffffff mode 0 volume 16
              [zapit] GetConfig...
              [femanager.cpp:allocateFE:748] pip demux: 2
              [zapit.cpp:StopPlayBack:2298] standby 0 playing 0 forced 0 send_pmt 1
              [capmt.cpp:SetMode:239] PLAY: fe_num 0 dmx_src 0
              [capmt.cpp:SetMode:292] channel ab820806000227da [ITV2] mode 0 STOP src 0 mask 1
              -> 0 update 0
              [ca_ci] -> SendCAPMT
              TP: AB8208060002
              SID: 27DA
              SOURCE: 0
              CA_MASK: 0
              CALEN: 0
              Scrambled: 0
              Mode: 0
              Enabled: STOP
              2021-10-09 14:15:00.892 [sectionsd] commandserviceChanged: Service change to ab8
              20806000227da demux #0
              2021-10-09 14:15:00.892 [sectionsd] changeDMX: for 0x4e not ignored! even though
              real_pauseCounter> 0 (1)
              2021-10-09 14:15:00.893 [sectionsd] changeDMX: for 0x50 not ignored! even though
              real_pauseCounter> 0 (1)
              2021-10-09 14:15:00.940 [sectionsd] changeDMX: for 0x60 not ignored! even though
              real_pauseCounter> 0 ([opt9600_fp] VFDICONDISPLAYONOFF not supported on this re
              ceiver
              1)
              sh: you need to specify whom to kill
              CHDDDestExec: checking /sys/block/sda
              CHDDDestExec: /dev/sda is not a hdd, no sleep needed
              [ca_ci] -> Ready param:1
              ################################## after all ##################################:
              9836 msec
              [neutrino] initialized everything
              [CPlugins] could not find startup
              [dvb-sub] paused
              [zapit] parsing pmt pid 0x110 (ITV2)
              CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (ab820806000227da)
              2021-10-09 14:15:01.365 [sectionsd] commandserviceChanged: Service change to ab8
              20806000227da demux #0
              [subtitles] DVBSub: PID=0x092f, lang=eng, cpageid=0002, apageid=0002
              [subtitle] TTXSub: PID=0x0(da 0, 0)92e, lang=eng, p(da 0, 2)age=888
              [zapit] channel found, audio pid 92d, subtitle pid ffff(da 0, 2)ffff mode 0 volu
              me 16
              [zapit.cpp:StartPlayBack:2219] standby 0 playing 0 forced 0
              [zapit] vpid 92B apid 92D pcr 92B
              CRemoteControl::handleMsg: EVT_TUNE_COMPLETE (ab820806000227da)
              2021-10-09 14:15:01.485 [sectionsd] commandserviceChanged: Service change to ab8
              20806000227da demux #0
              ERROR:LinuxDvbvbPlaybackAddStream: Unable to create stream context - add playb
              ack stream failed -> the cause of this message is probably the reason for the absence of picture/sound
              [HAL:00874c18:video ] ioctl(fd, Find spdif_bypass control at 8bae6600
              VIDEO_PLAY)
              [HAL:00874c(da 0, 0)68:audio ] SetStreamType 1 (0x1)ERROR:LinuxDvbvbPlaybackAd
              dStream: Unable to create stream context - add playback stream failed
              
              ERROR:LinuxDvbvbPlaybackAddStream: Unable to create stream context
              [capmt.cpp:SetMode:239] PLAY: fe_num 0 dmx_src 0
              [capmt.cpp:SetMode:292] channel ab820806000227da [ITV2] mode 0 START src 0 mask
              0 -> 1 update 0
              [CBasicClient] connect failed.
              /tmp/camd.socket: No such file or directory
              [ca_ci] -> SendCAPMT
              TP: AB8208060002
              SID: 27DA
              SOURCE: 0
              CA_MASK: 1
              CALEN: 60
              Scrambled: 0
              Mode: 0
              Enabled: START
              [ca_ci] -> FindFreeSlot
              No free ci-slot
              CaMap Empty
              [pmt] set update filter, sid Can't set policy, VideoStream NULL
              0x27da pid 0x110 version 6
              2021-10-09 14:15:01.702 [sectionsd] timeThread: Time set via NTP, going to sleep
              for 1800 seconds.
              2021-10-09 14:15:01.704 [sectionsd] eitThread::run:: time set: Sat Oct 9 14:15:
              01 2021
              
              2021-10-09 14:15:01.705 [sectionsd] cnThread::run:: time set: Sat Oct 9 14:15:0
              1 2021
              
              2021-10-09 14:15:01.707 [sectionsd] freeSatThread::run:: time set: Sat Oct 9 14
              :15:01 2021
              
              
              [pti] session 10000, slot 20000, pid 0x092D, TCIndex = 00, state = 0x0000
              [pti] session 10000, slot 20001, pid 0x0012, TCIndex = 01, state = 0x0000
              [pti] session 10000, slot 20002, pid 0x092B, TCIndex = 02, state = 0x0000
              [pti] session 10000, slot 20003, pid 0x0110, TCIndex = 03, state = 0x0000
              [pti] session 10000, slot 20004, pid 0x0F02, TCIndex = 04, state = 0x4000
              [sdt monitor] wakeup...
              2021-10-09 14:15:02.931 [sectionsd] addEvent: ch 0806000227da running 4 (curr) g
              ot_CN 0
              [neutrino] CSectionsdClient::EVT_GOT_CN_EPG
              2021-10-09 14:15:02.991 [sectionsd] addEvent: ch 0806000227da running 1 (next) g
              ot_CN 1
              [neutrino] CSectionsdClient::EVT_GOT_CN_EPG
              [SDT] section 0 last 2 tsid 0x806 onid 0x2 -> use
              2021-10-09 14:15:03.182 [sectionsd] cnThread: eit update filter, ch 0x0806000227
              da, current ver 0x11 got events 3 (not active)
              [SDT] section 1 last 2 tsid 0x806 onid 0x2 -> use
              [ConfigFile] saving /var/tuxbox/config/timerd.conf
              [SDT] section 2 last 2 tsid 0x806 onid 0x2 -> use
              [SDT] tid 806 onid 02
              [SDT] tid 806 onid 02
              CVFD::setlcdpara[opt9600_fp] VFDBRIGHTNESS not supported on this receiver
              meter dimm 2 pow[starci2win] starci_poll_slot_status (slot 0; open = 1) >
              er 1
              [starci2win] starci_readreg reg=0x00, value=0x00
              [starci2win] Module A (0): result = 0x00, status = 1
              [starci2win] starci_poll_slot_status (slot 1; open = 1) >
              [starci2win] starci_readreg reg=0x09, value=0x00
              [starci2win] Module B (1): result = 0x00, status = 1
              [SDT] tid 806 onid 02
              CServiceManager::CopyCurrentServices: [UTV] remove
              CServiceManager::CopyCurrentServices: [UTV+1] remove
              CServiceManager::CopyCurrentServices: [talkSPORT] remove
              CServiceManager::CopyCurrentServices: [ITV] remove
              CServiceManager::CopyCurrentServices: [ITV3] remove
              CServiceManager::CopyCurrentServices: [ITV Encore+1] remove
              [sdt monitor] found changes.
              [dvb-sub] start, stopped 1 pid ffffffff
              [neutrino] CSectionsdClient::EVT_EIT_COMPLETE
              [starci2win] starci_poll_slot_status (slot 0; open = 1) >
              [starci2win] starci_readreg reg=0x00, value=0x00
              [starci2win] Module A (0): result = 0x00, status = 1
              [starci2win] starci_poll_slot_status (slot 1; open = 1) >
              [starci2win] starci_readreg reg=0x09, value=0x00
              [starci2win] Module B (1): result = 0x00, status = 1
              
              [pti] session 10000, slot 20000, pid 0x092D, TCIndex = 00, state = 0x0000
              [pti] session 10000, slot 20001, pid 0x0012, TCIndex = 01, state = 0x0000
              [pti] session 10000, slot 20002, pid 0x092B, TCIndex = 02, state = 0x0000
              [pti] session 10000, slot 20003, pid 0x0110, TCIndex = 03, state = 0x0000
              [pti] session 10000, slot 20004, pid 0x0F02, TCIndex = 04, state = 0x0000
              ......................
              As can be seen: the CI controller driver reports problems, probably because it has no work memory correctly assigned to it.

              Any one interested in on how all this was built: see this git.

              I have written this in the hope that one of the SH4/TDT veterans has some idea why there is no picture or sound and can provide some hints.

              Regards,

              Audioniek.
              Gruesse/Regards,

              Audioniek.

              Kommentar

              Nicht konfiguriertes PHP-Modul

              Einklappen

              [PROJEKT] SH4-Linux-Portierung auf Opticum 9600HDTS

              Einklappen
              Lädt...
              X