Das ist ein wichtiges Thema.
X
X

Wechselthread SkyS@t Mini HD auf Atemio 510 Titan

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • andy-1
    Administrator
    • 08.06.2007
    • 40627

    Wechselthread SkyS@t Mini HD auf Atemio 510 Titan

    1. Schritt: Bootloader auf Atemio stellen

    In der SkyS@t Mini HD sollte bereits der Bootloader 6.40 installiert sein.

    Dann einfach den Bootloader 6.40 von Atemio nehmen den ich hier angehängt habe für eure SkyS@t Mini HD

    und danach das Atemio TitanNit Image 1.32 installieren.

    Der Reseller der IRD beim Bootloader auf SkyS@t Mini HD stellen,

    sonst wird das IRD nicht erkannt.


    SkyS@t Mini HD PVR 252202A0 Bulgarien


    unten im Anhang die Wechsel IRD


    Nachdem der Atemio Bootloader drin ist,

    kann man das Titan Image flashen.

    Wichtig!!!!!!!!! Aber nicht das aktuelle TitanNit Image, sondern die 1.32 TitanNit Edition

    ---------------------------------------------------------------------------------------

    2. Schritt TitanNit Image installieren

    Wir flashen uns das passende Titan Image für die Atemio 500

    und machen eine Atemio 510-Titan aus der Atemio 500.

    Dazu laden wir uns das Image aus der Database:

    ATEMIO AM 510 HD TitanNit Firmware M22775 v1.32


    Jetzt solltet ihr euch das Image ansehen und entscheiden ob ihr eine Lizenz erweben wollt bei Atemio.

    Wenn ja wird euch die Board ID im Menü/System/Receiver freischalten mitgeteilt.

    Mit dieser solltet ihr dann bei Atemio nachfragen ob eine Freischaltung möglich ist.

    Falls hier schon Hardwarekonflikte auftreten, wird es keine Freischaltung geben.

    Also anrufen und nachfragen mit der notierten Board ID.

    Wenn ihr euren Freischaltcode erhalten habt, könnt ihr die Box bereits freischalten und den Key auf Funktion testen.

    Den Code gut aufbewahren.

    ---------------------------------------------------------------------------------------

    3.Schritt: Das aktuelle Titan Image einspielen.

    Downloads: Atemio 510 TitanNit Version 1.49

    Den Freischaltcode habt ihr,die Box sollte aber nach den Update noch freigeschalten sein.

    ---------------------------------
    Haftungsausschluß:
    Wir übernehmen keinerlei Haftung für eventuell auftretende Fehler, Probleme oder Beschädigungen!
    Benutzung auf eigenes Risiko!
    Angehängte Dateien
  • andy-1
    Administrator
    • 08.06.2007
    • 40627

    #2
    Software change for an SkyS@t Mini HD to Atemio 510 Titan



    1. Set your Bootloard to Atemio



    Your SkyS@t Mini HD should already have the Bootloader 6.40 installed.
    Should it be installed update the IRD to Atemio Bootloader 6.40 for your SkyS@t Mini HD you find attached at the end of this thread. Afterwoods flash the TitanNit Software Version 1.32.

    You must set your IRD Reseller to SkyS@t Mini HD otherwise the IRD is not recognized.



    SkyS@t Mini HD PVR 252202A0 Bulgarien



    See the attachment at the end to change the IRD.
    Once you have successfully set the Atemio IRD you are able to flash the TitanNit Software.
    IMPORTANT: DO NOT FLASH THE NEWEST RELEASE. YOU MUST USE VERSION 1.32 FIRST!!!



    2. Installation of TitanNit Software



    Now you need to flash the TianNit Software for an Atemio 500 to convert it to an Atemio 510.
    Just download the Software from our Database:

    ATEMIO AM 510 HD TitanNit Firmware M22775 v1.32



    Now you should test the TitanNit software and decide if you want to obtain a license from Atemio.
    Should you decide to do so you need to call up the Board-ID by navigating to Menu/System/Activate Receiver. Having the Board-ID you should contact Atemio to find out if you can obtain a license to use the full range of TitanNit Software. Should you discover Hardware problems up to this point a license for the Software most probably cannot be issued due to incompatibility. To make sure you have to call Atemio and find out. When you receive an activation code you should enter it into your Software to activate the full functionality of TitanNit. Please keep your Code in a well secure place.



    3. Should you have obtained an activation code from Atemio you may flash TitanNit 1.49 from our Database



    Downloads: Atemio 510 TitanNit Version 1.49

    You should still have your activation code which you received from Atemio should you need it. The Software should be activated after the update.
    ATTENTION:
    ____________________
    Disclaimer:
    We take no liability for errors, problems or damage to your hardware.
    Use at own risk.

    ATTACHMENT:
    Loader_6.40_AM500.r252202A0.ird (123,9 KB, 1x aufgerufen)

    Kommentar

    Nicht konfiguriertes PHP-Modul

    Einklappen

    Wechselthread SkyS@t Mini HD auf Atemio 510 Titan

    Einklappen
    Lädt...
    X