Das ist ein wichtiges Thema.
X
X

Wechselthread Diginor 8800 HD auf Atemio 700 Titan

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • andy-1
    Administrator
    • 08.06.2007
    • 40627

    Wechselthread Diginor 8800 HD auf Atemio 700 Titan

    1. Schritt: Bootloader 2.54 auf Atemio stellen

    Den Reseller der Atemio Bootloader 2.54 IRD auf Diginor 8800 HD stellen, sonst wird das IRD nicht erkannt.

    Diginor 8800 HD 20260600 Schweden

    die Wechsel IRD als Download siehe Anhang ganz unten...



    Nachdem der Atemio Bootloader drin ist,

    kann man das Titan Image flashen.

    Wichtig!!!!!!!!! Aber nicht das aktuelle TitanNit Image, sondern die 1.32 TitanNit Edition

    2. Schritt: TitanNit Edition 1.32 installieren und testen ob ihr eine Freischaltung erwerben wollt

    ATEVIO AM 700 HD TitanNit Firmware M22775 v1.32

    Jetzt solltet ihr euch das Image ansehen und entscheiden ob ihr eine Lizenz erweben wollt bei Atemio.

    Wenn ja wird euch die Board ID im Menü/System/Receiver freischalten mitgeteilt.

    Mit dieser solltet ihr dann bei Atemio nachfragen ob eine Freischaltung möglich ist.

    Falls hier schon Hardwarekonflikte auftreten, wird es keine Freischaltung geben.

    Also anrufen und nachfragen mit der notierten Board ID.

    Wenn ihr euren Freischaltcode erhalten habt, könnt ihr die Box bereits freischalten und den Key auf Funktion testen.

    Den Code gut aufbewahren.

    3.Schritt: Die Version 1.45 aus der Database flashen, wenn ihr die Freischaltung erworben habt

    Atevio 700 TitanNit 1.45 iboot

    Den Freischaltcode habt ihr,die Box sollte aber nach den Update noch freigeschalten sein.

    ---------------------------------
    Haftungsausschluß:
    Wir übernehmen keinerlei Haftung für eventuell auftretende Fehler, Probleme oder Beschädigungen!
    Benutzung auf eigenes Risiko!
    Angehängte Dateien
  • andy-1
    Administrator
    • 08.06.2007
    • 40627

    #2
    Software change for a Diginor 8800 HD to Atemio 700 TitanNit

    You must set your IRD Reseller to
    Diginor 8800 HD otherwise the IRD is not recognized.

    Set your Bootloader 2.54 to Atemio

    Diginor 8800 HD 20260600 Schweden


    See the Attachment* at the end of this thread for the IRD change.

    Once you have successfully set the Atemio IRD you are able to flash the TitanNit Software.

    IMPORTANT: DO NOT FLASH THE NEWEST RELEASE. YOU MUST USE VERSION 1.32 FIRST!!!

    Flash TitanNit 1.32 and see if you would like to obtain a license for TitanNit



    ATEVIO AM 700 HD TitanNit Firmware M22775 v1.32



    Now you should test the TitanNit software and decide if you want to obtain a license from Atemio.
    Should you decide to do so you need to call up the Board-ID by navigating to Menu/System/Activate Receiver. Having the Board-ID you should contact Atemio to find out if you can obtain a license to use the full range of TitanNit Software. Should you discover Hardware problems up to this point a license for the Software most probably cannot be issued due to incompatibility. To make sure you have to call Atemio and find out. When you receive an activation code you should enter it into your Software to activate the full functionality of TitanNit. Please keep your Code in a well secure place.



    3. Should you have obtained an activation code from Atemio you may flash TitanNit 1.45 from our Database


    Atevio 700 TitanNit 1.45 iboot


    You should still have your activation code which you received from Atemio should you need it. The Software should be activated after the update.

    ATTENTION:
    ____________________
    Disclaimer:
    We take no liability for errors, problems or damage to your hardware.
    Use at own risk.




    *Attachment:
    Angehängte Dateien

    Kommentar

    Nicht konfiguriertes PHP-Modul

    Einklappen

    Wechselthread Diginor 8800 HD auf Atemio 700 Titan

    Einklappen
    Lädt...
    X