Das ist ein wichtiges Thema.
X
X

Wechselthread Rebox RE-8500 auf Atemio 7600 Titan

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • andy-1
    Administrator
    • 08.06.2007
    • 40627

    Wechselthread Rebox RE-8500 auf Atemio 7600 Titan

    1. Bootloader sollte der 6.00 sein

    Orginal Image Bootloaderwechsel von 5.04 zu 6.00 Bootloader:



    Bitte mit USB Stick aus der orginal Fortis Firmeware installieren,
    das Image wird direkt geflasht und nicht erst ins tmp geschrieben.
    Die Titan Installation passt immer, wenn der Bootloader 6.0 installiert ist und der Reseller Atemio.
    Mit den beiden Image,
    wird der Wechsel zu den neuen Bootloader 6.0 vollzogen.

    1.99.99.xx = Übergangsimage orginal Soft für Layoutwechsel und Resellernummerwechsel
    2.10.xx= Bootloader wird von 5.04 auf 6.00 umgestellt

    ----------------------------------------------------

    Habt ihr den Bootloader 6.00 bereits drin,

    dann folgendes Image flashen:


    Atemio 7600 Bootloader 6.00 mit den Reseller IRD von der Rebox RE-8500

    Rebox RE-8500 HD PVR 230100A0 Niederlande

    FAC.Atemio.AM7500.v2.10.67.2012Jun27.230100A0.ird

    2. Link zum Download des Wechselimages Rebox RE-8500:

    Atemio 7500 orginal Image Reseller230100A0 IRD


    Das Image muß den Bootloader bereits von Atemio enthalten,
    damit habt ihr nach den Flashen eine Atemio 7500 Box.

    Nun kann man das 1.32 Titan Image installieren.
    Kopieren Sie die Datei mit der Endung .ird auf einen FAT oder FAT32 formatierten USB-Speicher
    (manche USB-Speicher Sticks sind ungeeignet sollte die Installation nicht funktionieren bitte einen Anderen probieren)
    Schalten Sie das Netzteil an Ihrem Atemio 7600 aus.
    Stecken Sie ihr USB Stick vorn im USB-Steckplatz ihrer Box Schalten Sie das Netzteil wieder ein
    und halten Sie dabei die CH^ +Taste am Gerät für ca. 5 Sekunden gedrückt.
    Iboot erscheint im Display und danach Scan USB, jetzt können sie die CH^ +Taste loslassen.
    Die IRD-Installation wird somit eingeleitet vom USB Stick. Der Receiver muß nach Abschluss der Installation neu gestartet werden.

    Hinweis: Ziehen während der Installation auf keinen Fall den Netzteilstecker und schalten sie das Gerät nicht aus,
    da dies zu einer Beschädigung des Receivers führen kann.


    Atemio7600_TitanNit_Edition_1.30
    --------------------------------------------

    3. ATEMIO_M22471_g4819_atemio7600_update_titan_v1-30_p211_P191-FFM_M3_UPDATEUSB_nodebug.ird

    Aufgrund tiefgreifender Veränderungen insbesondere durch den neuen Bootloader
    i-boot kann die Installation nur per USB durchgeführt werden.



    4. Jetzt solltet ihr euch das Image ansehen und entscheiden ob ihr eine Lizenz erweben wollt bei Atemio.

    Wenn ja wird euch die Board ID im Menü/System/Receiver freischalten mitgeteilt.
    Mit dieser solltet ihr dann bei Atemio nachfragen ob eine Freischaltung möglich ist.
    Falls hier schon Hardwarekonflikte auftreten, wird es keine Freischaltung geben.
    Also anrufen und nachfragen mit der notierten Board ID.
    Wenn ihr euren Freischaltcode erhalten habt, könnt ihr die Box bereits freischalten und den Key auf Funktion testen.
    Den Code gut aufbewahren.

    5.Dann die Version 1.49 aus der Database flashen.

    Atevio 7600 TitanNit 1.49


    Den Freischaltcode habt ihr,die Box sollte aber nach den Update noch freigeschalten sein.

    Hinweiß
    --------------------------------------
    Haftungsausschluß:
    Wir übernehmen keinerlei Haftung für eventuell auftretende Fehler, Probleme oder Beschädigungen!
    Benutzung auf eigenes Risiko!
  • andy-1
    Administrator
    • 08.06.2007
    • 40627

    #2
    Software change for an Rebox RE-8500 to TitanNit for Atemio 7600 HD

    1.Your Receiver must have the Bootloader 6.0 installed.



    To upgrade the original Bootloader 5.04 to Version 6.0:
    Use a USB-Stick to flash the original Fortis Software directly to the
    FLASH of your Receiver. That way you don’t need to flash via the
    temporary Memory.
    You may install the TitanNit Software directly to your Atemio
    Reseller Receiver once it has the Bootloader 6.0 installed.
    Flashing one of the following listed Images your Receiver is
    suitable for Bootloader 6.0:
    1.99.99.xx = This Image holds the original Layout and updates the
    Reseller ID
    2.10.xx = Bootloader is updated from Version 5.04 to 6.0

    ______________________________________


    Your Receiver has the Bootloader 6.0 onboard then proceed as follows:

    Atemio 7600 Bootloader 6.00 with the Reseller IRD for Rebox RE-8500

    Rebox RE-8500 HD PVR 230100A0 Niederlande

    FAC.Atemio.AM7500.v2.10.67.2012Jun27.r230100A0.ird

    2. Link to Download the Resellerimage for Rebox RE-8500 to upgrade to:

    Atemio 7500 orginal Image Reseller230100A0 IRD


    Once your Receiver has the original Atemio Image with the
    Bootloader flashed your Receiver is upgraded to an Atemio 7500.
    Now You may proceed and flash the TitanNit Software Version 1.32.
    To do so copy the file with the extension .ird to a FAT or FAT32 formatted USB-Stick.
    Should you have problems with your USB-Stick please try a different one as some USB-Sticks cause compatibility problems.
    Power-off your Receiver at the mains.
    Insert your USB-Stick which contains the .ird file into the front
    USB Port of your Receiver. Switch your Receiver back on and hold
    the CH^+ Key on the front of the Receiver for approx. 5 seconds.
    The Display on the front of your Receiver should show the iboot
    Message and start to scan the USB. Now you can release the
    CH^+key and the IRD flash process should begin. After the IRD
    flashing has finished the Receiver must be rebooted.
    IMPORTANT: Do not power off or switch off your Receiver during
    the flash process. It will irreversibly damage your Receiver!

    Atemio7600_TitanNit_Edition_1.30
    --------------------------------------------


    3. ATEMIO_M22471_g4819_atemio7600_update_titan_v1-30_p211_P191-FFM_M3_UPDATEUSB_nodebug.ird



    Due to major improvements and the advantages of the new
    bootloader iboot the Receiver Update is only possible via USB.

    4.Once the Receiver starts up with the new Software TitanNit you need to decide if you would like to obtain a license from Atemio.

    Next you need to call up the Board-ID by navigating to Menu/System/Receiver. Having the Board-ID you should contact
    Atemio to find out if you can obtain a license to use the full range of TitanNit Software.
    Should you discover Hardware problems up to this point a license for the Software most probably cannot be issued due to incompatibility.
    To make sure you have to call Atemio and find out.
    When you receive an activation code you should enter it into your Software to activate the full functionality of TitanNit.
    Please keep your Code in a well secure place.

    5.Now proceed and flash the newest version on TitanNit from our Database.

    Atevio 7600 TitanNit 1.49

    You should still have your activation code which you received from Atemio should you need it.
    The Software should be activated after the update.


    ATTENTION:
    ____________________
    Disclaimer:
    We take no liability for errors, problems or damage to your hardware.
    Use at own risk.

    Kommentar

    Nicht konfiguriertes PHP-Modul

    Einklappen

    Wechselthread Rebox RE-8500 auf Atemio 7600 Titan

    Einklappen
    Lädt...
    X