Das ist ein wichtiges Thema.
X
X

Wechselthread Octagon1008 auf Atemio 700 TitanNit

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • andy-1
    Administrator
    • 08.06.2007
    • 40627

    Wechselthread Octagon1008 auf Atemio 700 TitanNit

    1. Schritt: Bootloader 2.54 auf Atemio stellen

    Den Reseller der Atemio Bootloader 2.54 IRD auf Octagon1008 stellen, sonst wird das IRD nicht erkannt.

    Octagon SF-1008 20020300 Deutschland

    die Wechsel IRD als Download siehe Anhang ganz unten...



    Nachdem der Atemio Bootloader drin ist,

    kann man das Titan Image flashen.

    Wichtig!!!!!!!!! Aber nicht das aktuelle TitanNit Image, sondern die 1.32 TitanNit Edition

    2. Schritt: TitanNit Edition 1.32 installieren und testen ob ihr eine Freischaltung erwerben wollt

    ATEVIO AM 700 HD TitanNit Firmware M22775 v1.32

    Jetzt solltet ihr euch das Image ansehen und entscheiden ob ihr eine Lizenz erweben wollt bei Atemio.

    Wenn ja wird euch die Board ID im Menü/System/Receiver freischalten mitgeteilt.

    Mit dieser solltet ihr dann bei Atemio nachfragen ob eine Freischaltung möglich ist.

    Falls hier schon Hardwarekonflikte auftreten, wird es keine Freischaltung geben.

    Also anrufen und nachfragen mit der notierten Board ID.

    Wenn ihr euren Freischaltcode erhalten habt, könnt ihr die Box bereits freischalten und den Key auf Funktion testen.

    Den Code gut aufbewahren.

    3.Schritt: Die Version 1.45 aus der Database flashen, wenn ihr die Freischaltung erworben habt

    Atevio 700 TitanNit 1.45 iboot

    Den Freischaltcode habt ihr,die Box sollte aber nach den Update noch freigeschalten sein.

    ---------------------------------
    Haftungsausschluß:
    Wir übernehmen keinerlei Haftung für eventuell auftretende Fehler, Probleme oder Beschädigungen!
    Benutzung auf eigenes Risiko!
    Angehängte Dateien
  • andy-1
    Administrator
    • 08.06.2007
    • 40627

    #2

    1. Schritt: Bootloader 2.54 auf Atemio stellen

    Den Reseller der Atemio Bootloader 2.54 IRD auf Octagon1008 SE stellen, sonst wird das IRD nicht erkannt.

    Octagon SF-1008 SE 20020303 Deutschland


    im Anhang für diese Box die Wechsel IRD Bootloader 2.54

    für Atemio Images - TitanNit


    Haftungsausschluß:
    Wir übernehmen keinerlei Haftung für eventuell auftretende Fehler, Probleme oder Beschädigungen!
    Benutzung auf eigenes Risiko!
    Angehängte Dateien

    Kommentar

    • andy-1
      Administrator
      • 08.06.2007
      • 40627

      #3
      Software change for a Octagon1008 to Atemio 700 TitanNit

      You must set your IRD Reseller to
      Octagon1008 otherwise the IRD is not recognized.


      Set your Bootloader 2.54 to Atemio


      Octagon SF-1008 20020300 Deutschland


      See the Attachment* at the end of this thread for the IRD change.

      Once you have successfully set the Atemio IRD you are able to flash the TitanNit Software.

      IMPORTANT: DO NOT FLASH THE NEWEST RELEASE. YOU MUST USE VERSION 1.32 FIRST!!!

      Flash TitanNit 1.32 and see if you would like to obtain a license for TitanNit



      ATEVIO AM 700 HD TitanNit Firmware M22775 v1.32



      Now you should test the TitanNit software and decide if you want to obtain a license from Atemio.
      Should you decide to do so you need to call up the Board-ID by navigating to Menu/System/Activate Receiver. Having the Board-ID you should contact Atemio to find out if you can obtain a license to use the full range of TitanNit Software. Should you discover Hardware problems up to this point a license for the Software most probably cannot be issued due to incompatibility. To make sure you have to call Atemio and find out. When you receive an activation code you should enter it into your Software to activate the full functionality of TitanNit. Please keep your Code in a well secure place.



      3. Should you have obtained an activation code from Atemio you may flash TitanNit 1.45 from our Database


      Atevio 700 TitanNit 1.45 iboot


      You should still have your activation code which you received from Atemio should you need it. The Software should be activated after the update.

      ATTENTION:
      ____________________
      Disclaimer:
      We take no liability for errors, problems or damage to your hardware.
      Use at own risk.




      *Attachment:
      Angehängte Dateien

      Kommentar

      • hamsibln
        Neuer Benutzer
        • 22.03.2014
        • 1

        #4
        Error 10

        ich komme nicht ins System. Octagons System verhindert das iboot aufgespielt wird.. gibt es ein trick dabei?
        ich geh so vor..
        1. usb stick Fat32
        i-bootav700.ird
        2. octagon 1008c plus HD ausschalten
        3. usb stick einstecken
        4. octagon einschalten mit channel+ bis Scanning erscheint.

        es findet die dateie liest es aus und Fehler 10 erscheint...

        Kommentar

        • andy-1
          Administrator
          • 08.06.2007
          • 40627

          #5
          UpdateLoader.Atevio.AV700HDPVR.L2.54.r20020303.ird

          reseller muß in der ird angepasst sein

          Kommentar

          • c.monty
            Benutzer
            • 29.01.2008
            • 62

            #6
            Zitat von andy-1 Beitrag anzeigen
            Software change for a Octagon1008[B][B] to Atemio 700 TitanNit

            Now you should test the TitanNit software and decide if you want to obtain a license from Atemio.
            Should you decide to do so you need to call up the Board-ID by navigating to Menu/System/Activate Receiver. Having the Board-ID you should contact Atemio to find out if you can obtain a license to use the full range of TitanNit Software. Should you discover Hardware problems up to this point a license for the Software most probably cannot be issued due to incompatibility. To make sure you have to call Atemio and find out. When you receive an activation code you should enter it into your Software to activate the full functionality of TitanNit. Please keep your Code in a well secure place.


            Hallo!

            1. Wo genau bekomme ich die Atemio Lizenz?
            2. Ist der Erwerb der Lizenz kostenpflichtig?
            3. Muss ich bei Atemio anrufen um den Activation Key zu erhalten?


            THX

            Kommentar

            • karl1962
              Neuer Benutzer
              • 03.01.2015
              • 1

              #7
              Hallo , ich möchte meinen Octagon 1008se intelligance mit Enigma betreiben . Mein Bootlader ist version 2.54 .
              wie stelle ich im Resteller auf Octagon um .
              Bevor ich was falsch mache frage ich lieber nach . Wer kann mir auskunft geben .
              Finde ich noch ein How to do hier im Board . Habe ich was überlesen ?

              Hilfe wäre nett . Ich hoffe ich darf hier Fragen stellen .

              mfg karl

              Kommentar

              • andy-1
                Administrator
                • 08.06.2007
                • 40627

                #8
                Hallo , ich möchte meinen Octagon 1008se intelligance mit Enigma betreiben
                Mit Enigma da bist du hier falsch,

                schaue mal in HDMU Board oder im PKT Board nach.

                Hier geht es um Titan für baugleiche Boxen.

                Für Enigma mußt du nichts umstellen...

                Kommentar

                • Actros
                  Erfahrene Benutzer
                  • 25.02.2009
                  • 145

                  #9
                  Hi, ich habe da eine 1008SE+ mit boot L 6.20 muss der gegen L2.54 getauscht werden?

                  Kommentar

                  • SoLaLa
                    Super-Moderator
                    • 11.02.2008
                    • 8128

                    #10
                    nein, falscher receiver... av700 ist NICHT baugleich zu 1008SE+

                    oder anders ausgedrückt: 1008se und 1008se+ sind völlig verschieden

                    Kommentar

                    • Actros
                      Erfahrene Benutzer
                      • 25.02.2009
                      • 145

                      #11
                      Ok, und wie kriege ich am einfachsten TitanNit auf die Box "1008SE+" ?

                      Kommentar

                      • A.Typhoon
                        Neuer Benutzer
                        • 21.10.2010
                        • 34

                        #12
                        Octagon SF 1008 HD mit Titan pre alpha 1.2a

                        Hallo @
                        Habe noch den alten Octagon SF 1008 HD Intelligence mit Titan pre alpha 1.2a und MAXIBOOT drauf.
                        Wie kann ich auf die neue ver. von Titan umsteigen?
                        MfG

                        Kommentar

                        • Uljanow
                          Super-Moderator
                          • 01.01.2008
                          • 16911

                          #13
                          Vielleicht mal auf Seite 1 lesen!?
                          sigpic
                          Lebe jeden Tag so als wäre es Dein Letzter!

                          Kommentar

                          • A.Typhoon
                            Neuer Benutzer
                            • 21.10.2010
                            • 34

                            #14
                            Zitat von Uljanow Beitrag anzeigen
                            Vielleicht mal auf Seite 1 lesen!?
                            Wie spiele ich den bootloader rein? Gibt es eine anleitung?

                            Kommentar

                            • Uljanow
                              Super-Moderator
                              • 01.01.2008
                              • 16911

                              #15
                              Ich denke mal, das steht alles im Wiki. Vielleicht, da es ja auch ein ird ist, wie ein Image flashen.
                              sigpic
                              Lebe jeden Tag so als wäre es Dein Letzter!

                              Kommentar

                              Nicht konfiguriertes PHP-Modul

                              Einklappen

                              Wechselthread Octagon1008 auf Atemio 700 TitanNit

                              Einklappen
                              Lädt...
                              X