X

Flash Image erstellen

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • bretterknaller
    VIP
    • 07.01.2008
    • 992

    Flash Image erstellen

    Für welche Boxen kann man ein Flash Image erstellen?

    Code:
    at7500
    common
    hs7810a
    spark
    tf7700hdpvr
    ufs910
    ufs912
    ufs913
    Ufs 910/912/913/at7500 ist mir klar.
    Welche Boxen fallen unter hs7810a/spark und tf7700pvr?
    Gibt es noch andere Sonderfälle z.b at7500=av7600?
    Für welche Boxen macht es keinen sinn ein Flash Image zu erstellen? (Flashspeicher zu klein z.b 910) Davon ausgehend das mindestens NHD2 rauf passt ohne beschneiden vom Git Image.
    Mfg. Bretterknaller


    -Kathrein 912
  • bretterknaller
    VIP
    • 07.01.2008
    • 992

    #2
    Keiner eine Idee? Mir wäre halt wichtig wie ich z.b für die Atemio 7000 ein Flash Image erstelle.
    Mfg. Bretterknaller


    -Kathrein 912

    Kommentar

    • Oldtimer56
      Special VIP
      • 17.12.2009
      • 1432

      #3
      Unter Spark fallen z.Bsp. Pingulux, SAB Triplex, GM Triplex also die 7111 und 7105 CPU.
      Im Git ja als Spark und Spark7162, für die letztere benutze ich regelmässig das Script.
      Bei der UFS910 hab ich es abgewandelt, also ohne mini-fo nur klassisch squash / jffs2.
      Wobei das Git Neutrino noch passt, beim NHD2 müssen aber die dicken jpg´s nach /var verschoben und verknüpft werden sonst reich das root nicht.

      Kommentar

      • bretterknaller
        VIP
        • 07.01.2008
        • 992

        #4
        Übersicht

        Code:
        (1) Kathrein UFS-910
        (3) Kathrein UFS-912
        (4) Kathrein UFS-922
        (5) Topfield 7700 HDPVR
        (6) Fortis based (HDBOX)
        (7) SpiderBox HL-101
        (8) Edision Argus vip
        (9) Cuberevo (IPBOX 9000)
        (10) Cuberevo mini (IPBOX 900)
        (11) Cuberevo mini2 (IPBOX 910)
        (12) Cuberevo 250 (IPBOX 91)
        (13) Cuberevo 9500HD (7000HD)
        (14) Cuberevo 2000HD
        (15) Cuberevo mini_fta (200HD)
        (16) Homecast 5101
        (17) Octagon 1008
        (18) SPARK
        (19) Atevio7500
        (20) SPARK7162
        (21) IPBOX9900
        (22) IPBOX99
        (23) IPBOX55
        (24) Fortis HS7810A
        (25) B4Team ADB 5800S
        (26) Fortis HS7110
        (27) WHITEBOX
        (28) Kathrein UFS-913
        Das sind ja die aktuellen Boxen für die man ein Image bauen kann.
        Hier gibt es ja schon recht viele Baugleiche.
        z.b (6) Fortis based (HDBOX) ==Av7000 oder (17) Octagon 1008 == Av 700

        Beim Flash schaut es ja dann so aus.

        Code:
        at7500
        common
        hs7810a
        spark
        tf7700hdpvr
        ufs910
        ufs912
        ufs913
        Von dir das Beispiel:
        spark== Pingulux, SAB Triplex, GM Triplex
        hs7810a== av700?

        Ich persönlich finde es recht Unübersichtlich wenn man sich als neuer hier mal ran traut.

        Gibt es noch mehr solcher Fälle?
        Mfg. Bretterknaller


        -Kathrein 912

        Kommentar

        • Oldtimer56
          Special VIP
          • 17.12.2009
          • 1432

          #5
          Ja da haste recht, da sollte wenigstens ein ReadMe hin für welche Boxen das Flash jeweils geht.

          hs7810a ==> octagon 1008 se+

          Kommentar

          • bretterknaller
            VIP
            • 07.01.2008
            • 992

            #6
            Das gleiche Problem hat man ja schon bei der Boxauswahl ;-)

            Vielleicht ist ja noch einer so nett und nennt hier noch mehr Beispiele.
            1.Boxauswahl
            2.Flashimage

            Halt wo der Name der Box nicht passt oder halt der Name des Flashscriptes.
            Mfg. Bretterknaller


            -Kathrein 912

            Kommentar

            • bretterknaller
              VIP
              • 07.01.2008
              • 992

              #7
              Spark

              Habe hier mal ein schönes Beispiel gefunden auf der HDMU Webseite.

              SPARK: (Pingulux, GM 990, GM 990 reloaded, Amiko Alien, SAB Unix F+ SOLO etc.)
              Mfg. Bretterknaller


              -Kathrein 912

              Kommentar

              • Grabber
                Erfahrene Benutzer
                • 13.01.2010
                • 318

                #8
                würde mich auch interessieren, wie das überhaupt mit den flashimages
                klappt. Klar das die E2-Images auf den Cuberevo's nicht mehr passen ist
                mit klar. Aber mit NHD2 sollte das doch zumindest theoretisch klappen.

                Leider hab ich zum Thema flashimage immer nur anfragen zu gefunden, aber
                noch nicht wie man welche erstellt. Würde mich freuen, wenn das mal jemand
                erklären kann. THX

                sigpic
                http://www.cuberevo-forum.eu
                IPBox9000HD - IPBox910HD - UnityMedia - LG 42LD650

                Kommentar

                • jockyw2001
                  Erfahrene Benutzer
                  • 12.04.2008
                  • 252

                  #9
                  I have built E2 and various Neutrino images from current max-tdt Git for Av7000 and UFS910. The flash images built with flash script are all too big. Is there some special recipe to build flash images that fit?
                  Thx in advance for any tips and tricks.

                  Kommentar

                  • Einstein
                    Nobelpreisträger
                    • 02.02.2008
                    • 42638

                    #10
                    Zitat von jockyw2001 Beitrag anzeigen
                    I have built E2 and various Neutrino images from current max-tdt Git for Av7000 and UFS910. The flash images built with flash script are all too big. Is there some special recipe to build flash images that fit?
                    Thx in advance for any tips and tricks.
                    That's one of the reasons we moved to TitanNit! E2 ist much to big für old sh4-architecture!

                    Kommentar

                    • jockyw2001
                      Erfahrene Benutzer
                      • 12.04.2008
                      • 252

                      #11
                      Zitat von Einstein Beitrag anzeigen
                      That's one of the reasons we moved to TitanNit! E2 ist much to big für old sh4-architecture!
                      Sure enough 16MB flash isn't great, but I was hoping to get some tips which parts can be deleted from the release folder, before running the flash script.

                      Btw: Titannit is very nice but the app seems to be closed source ?!

                      Kommentar

                      • TangoCash
                        Erfahrene Benutzer
                        • 23.11.2008
                        • 179

                        #12
                        If you build a neutrino-mp (e.g. make yaud-neutrino-mp) for ufs910 from max-tdt master branch it will fit into flash without further modifications.
                        a.k.a. DaHooD

                        Es gibt nur 10 Arten von Menschen auf der Welt, die die binär können, und die die die anderen 1000 suchen.

                        Kommentar

                        • obi
                          obi
                          SVN-.....
                          • 04.01.2008
                          • 24587

                          #13
                          Zitat von jockyw2001 Beitrag anzeigen
                          Sure enough 16MB flash isn't great, but I was hoping to get some tips which parts can be deleted from the release folder, before running the flash script.

                          Btw: Titannit is very nice but the app seems to be closed source ?!
                          titannit plugin src is partly open src

                          Kommentar

                          • jockyw2001
                            Erfahrene Benutzer
                            • 12.04.2008
                            • 252

                            #14
                            Zitat von TangoCash Beitrag anzeigen
                            If you build a neutrino-mp (e.g. make yaud-neutrino-mp) for ufs910 from max-tdt master branch it will fit into flash without further modifications.
                            Hi Tango, I just finished building neutrino-mp for fortis_hdbox (av7000) and after running make_flash.sh I end up with a zip file called fortis_BASE-rev5956_HAL-rev332_NMP-rev4269.zip which contains a miniFLASH.img of 36.3MB. It looks like my release_neutrino folder is bloated.

                            Kommentar

                            • TangoCash
                              Erfahrene Benutzer
                              • 23.11.2008
                              • 179

                              #15
                              your release_neutrino contains some uneeded garbage...size should be about 25 mb...

                              Try a "make clean" and a "rm .deps/*" first to cleanup your cdk.
                              then do a "make yaud-neutrino-mp" to build neutrino,
                              and then make flash.
                              a.k.a. DaHooD

                              Es gibt nur 10 Arten von Menschen auf der Welt, die die binär können, und die die die anderen 1000 suchen.

                              Kommentar

                              Nicht konfiguriertes PHP-Modul

                              Einklappen

                              Flash Image erstellen

                              Einklappen
                              Lädt...
                              X