X
-
So, habs jetzt mal geflasht, läuft auch schon echt Super, aber kriege irgendwie noch kein Fernsehbild zustande.
Läuft das überhaupt schon?Gruß cpet
2x UFS910 <1Watt Titan
2x UFS913 mit e2
Epson Beamer EH-TW 5900 / Samsung LCD LE40 B650 / Samsung Plasma PS-42D4S AV-Receiver Onkyo TX-SR604 / Harmony 900
Kommentar
-
Zitat von cpet Beitrag anzeigenSo, habs jetzt mal geflasht, läuft auch schon echt Super, aber kriege irgendwie noch kein Fernsehbild zustande.
Läuft das überhaupt schon?
Hm,
Kommentar
-
Also hier dann mal das Log:
Code:-----====== HDMU 1196 enigma2 Git 4722 ======----- BusyBox v1.20.2 (2012-09-17 20:28:56 CEST) built-in shell (ash) Enter 'help' for a list of built-in commands. UFS913:~# killall rcS killall: rcS: no process killed UFS913:~# killall enigma2 killall: enigma2: no process killed UFS913:~# enigma2 PYTHONPATH: /usr/lib/enigma2/python + (1) Background File Eraser + (5) Tuxtxt + (8) graphics acceleration manager STMFB accel interface available + (9) GFBDC 15360k total video mem 7260k usable video mem 5640kB available for acceleration surfaces. resolution: 720 x 576 x 32 (stride: 2880) + (9) gLCDDC couldn't open LCD - load lcd.ko! lcd buffer 0x6989c0 8448 bytes, stride 132 + (9) Font Render Class [FONT] initializing lib... [FONT] loading fonts... [FONT] Intializing font cache, using max. 4MB... + (10) gRC RC thread created successfully + (15) eWindowStyleManager + (20) DVB-CI UI + (20) UHF Modulator couldnt open /dev/rfmod0!!!! + (20) RC Input layer + (20) misc options + (20) AVSwitch Driver couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed! + (21) input device driver Input device "TDT RC event driver" is a remotecontrol failed to open /dev/input/event1 Input device "" is a keyboard failed to open /dev/input/event2 Input device "" is a mouse failed to open /dev/input/event3 Input device "" is a keyboard Found 4 input devices! + (22) Hdmi CEC driver + (30) eActionMap + (35) CI Slots scanning for common interfaces.. CI Slot 0: reset requested CI Slot 1: reset requested CI Slot 0 setSource(0) CI Slot 1 setSource(0) eDVBCIInterfaces->setInputSource(0, 0) eDVBCIInterfaces->setInputSource(1, 1) cannot open /proc/stb/tsmux/input2 cannot open /proc/stb/tsmux/input3 done, found 2 common interface slots + (35) CA handler + (36) Stream server [SERVERSOCKET] ERROR on bind() (Address already in use) + (40) eServiceCenter settings instance. + (41) eServiceFactoryDVD + (41) eServiceFactoryM2TS + (41) eServiceFactoryMP3 + (41) eServiceFactoryFS + (41) eServiceFactoryDVB reached rl 70 ---- opening lame channel db reading services (version 4) loaded 6351 services scanning for frontends.. opening frontend 0 detected satellite frontend FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported close frontend 0 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported opening frontend 1 detected satellite frontend FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported close frontend 1 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported found 1 adapter, 2 frontends(2 sim) and 3 demux, boxtype 9 RTC not ready... wait for transponder time [EPGC] Initialized EPGCache (wait for setCacheFile call now) Loading spinners... found 12 spinner! executing main setIoPrio best-effort level 3 ok couldn't open fp [Harddisk] enumerating block devices... new Harddisk sda -> /dev/sda -> /dev/sda new Harddisk sdb -> /dev/sdb -> /dev/sdb main thread is non-idle! display spinner! Reading satellites.xml sec config cleared setSlotInfo for dvb frontend 0 to slotid 0, descr Availink AVL6222 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes setSlotInfo for dvb frontend 1 to slotid 1, descr Availink AVL6222 DVB-S2, need rotorworkaround No, enabled Yes, DVB-S2 Yes slot: 0 configmode: simple diseqcmode: single slot: 1 configmode: equal sec config completed loading bouquet... /etc/enigma2/bouquets.tv 1 loading bouquet... /etc/enigma2/userbouquet.mein_tv.tv 1 101 entries in Bouquet userbouquet.mein_tv.tv loading bouquet... /etc/enigma2/userbouquet.private_sd.tv 102 6 entries in Bouquet userbouquet.private_sd.tv loading bouquet... /etc/enigma2/userbouquet.kinder.tv 108 11 entries in Bouquet userbouquet.kinder.tv loading bouquet... /etc/enigma2/userbouquet.sky_sport.tv 119 24 entries in Bouquet userbouquet.sky_sport.tv loading bouquet... /etc/enigma2/userbouquet.sky_bundesliga.tv 143 12 entries in Bouquet userbouquet.sky_bundesliga.tv loading bouquet... /etc/enigma2/userbouquet.hdtv_sky_hd.tv 155 41 entries in Bouquet userbouquet.hdtv_sky_hd.tv loading bouquet... /etc/enigma2/userbouquet.sky_cinema.tv 196 10 entries in Bouquet userbouquet.sky_cinema.tv loading bouquet... /etc/enigma2/userbouquet.sky__welt.tv 206 20 entries in Bouquet userbouquet.sky__welt.tv loading bouquet... /etc/enigma2/userbouquet.sky_welt_extra.tv 226 17 entries in Bouquet userbouquet.sky_welt_extra.tv loading bouquet... /etc/enigma2/userbouquet.sky_select_selecthd.tv 243 13 entries in Bouquet userbouquet.sky_select_selecthd.tv loading bouquet... /etc/enigma2/userbouquet.musik.tv 256 13 entries in Bouquet userbouquet.musik.tv loading bouquet... /etc/enigma2/userbouquet.erotik.tv 269 42 entries in Bouquet userbouquet.erotik.tv loading bouquet... /etc/enigma2/userbouquet.oesterreich.tv 311 25 entries in Bouquet userbouquet.oesterreich.tv loading bouquet... /etc/enigma2/userbouquet.austriasat.tv 336 20 entries in Bouquet userbouquet.austriasat.tv loading bouquet... /etc/enigma2/userbouquet.favourites.tv 356 0 entries in Bouquet userbouquet.favourites.tv 15 entries in Bouquet bouquets.tv loading bouquet... /etc/enigma2/bouquets.radio 1 loading bouquet... /etc/enigma2/userbouquet.radio_deutsch.radio 1 13 entries in Bouquet userbouquet.radio_deutsch.radio loading bouquet... /etc/enigma2/userbouquet.sky_radio.radio 14 0 entries in Bouquet userbouquet.sky_radio.radio loading bouquet... /etc/enigma2/userbouquet.favourites.radio 14 0 entries in Bouquet userbouquet.favourites.radio 3 entries in Bouquet bouquets.radio sys:1: DeprecationWarning: Support for pyOpenSSL 0.9 is deprecated. Upgrade to pyOpenSSL 0.10 or newer. [FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Regular) [FONT] adding font /usr/local/share/fonts/andale.ttf...OK (Fixed) [FONT] adding font /usr/local/share/fonts/goodtime.ttf...OK (Crs) [FONT] adding font /usr/local/share/fonts/age.ttf...OK (Age) [FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/local/share/fonts/time.ttf...OK (BMCTime) [FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement) 3660kB available for acceleration surfaces. resolution: 1280 x 720 x 32 (stride: 5120) [FONT] adding font /usr/local/share/fonts/lcd.ttf...OK (LCD) [FONT] adding font /usr/local/share/fonts/ae_AlMateen.ttf...OK (Replacement) [FONT] adding font /usr/local/share/fonts/tuxtxt.ttf...OK (Console) [FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (Arial) [FONT] adding font /usr/share/enigma2/DMConcinnity-HD/fonts/HandelGotDBol.ttf...OK (Regular) [FONT] adding font /usr/share/enigma2/DMConcinnity-HD/fonts/ds_digital.ttf...OK (Digital) [FONT] adding font /usr/local/share/fonts/valis_enigma.ttf...OK (Subs) [FONT] adding font /usr/local/share/fonts/nmsbd.ttf...OK (FdLcD) [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event1' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' > [iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' > Selected keymap does not exist! Activating language Deutsch Failed to set LC_TIME to de_DE. Setting it to 'C' [ePopen] command: ip -o addr show dev eth0 loadSkin: Screen already defined elsewhere: HDMU_MainMenu loadSkin: Screen already defined elsewhere: HDMU_SoftcamControl loadSkin: Screen already defined elsewhere: HDMU_OverclockControl loadSkin: Screen already defined elsewhere: HDMU_SystemControl loadSkin: Screen already defined elsewhere: HDMU_SystemInfos loadSkin: Screen already defined elsewhere: HDMU_OSDControl loadSkin: Screen already defined elsewhere: HDMU_VFDControl loadSkin: Screen already defined elsewhere: HDMU_DLNAServer Plugin Extensions/OpenWebif failed to load: No module named DreamboxHardware Traceback (most recent call last): File "usr/lib/enigma2/python/Components/PluginComponent.py", line 52, in readPluginList File "usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import File "usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/plugin.py", line 25, in <module> File "usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/httpserver.py", line 17, in <module> File "usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/root.py", line 11, in <module> File "usr/lib/enigma2/python/Plugins/Extensions/OpenWebif/controllers/models/info.py", line 17, in <module> ImportError: No module named DreamboxHardware [eSocketMMIHandler] created successfully Plugin Extensions/BMediaCenter failed to load: No module named BMediaCenter.plugin Plugin probably removed, but not cleanly in /usr/lib/enigma2/python/Plugins/Extensions/BMediaCenter getModeList for port Component getModeList for port Scart getModeList for port HDMI getModeList for port HDMI-PC hotplug on dvi -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto setMode - port: HDMI mode: 1080i rate: 50Hz -> setting aspect, policy, policy2, wss 16:9 letterbox letterbox auto updateColor: HDMI --> applying pep values couldn't apply pep values. LINE # automatically generated by enigma 2 LINE Filme -fstype=cifs,rw,user=xxx,pass=xxx ://xxxxxxxxxxx/Filme #HDD_REPLACEMENT LINE [AutoMount.py] CheckMountPointFinished None None [AutoMount.py] symlink /media/net/Filme /media/hdd [AutoMount.py] add symlink fails! [Errno 17] File exists [AutoMount.py] Failed to create /media/hdd/movie Error: [Errno 2] No such file or directory: '/media/hdd/movie' [NetworkBrowser] fallback to default translation for NetworkBrowser [NetworkBrowser] fallback to default translation for Search for network shares [NetworkBrowser] fallback to default translation for MountManager [NetworkBrowser] fallback to default translation for Manage network shares starting hotplug handler adding Resource DiseqcTester resources: {'DiseqcTester': <function DiseqcTesterMain at 0x14b964c>} [AutomaticVolumeAdjustment] Starting AutomaticVolumeAdjustment... [AutomaticVolumeAdjustmentConfig] Loading config file... [AutomaticVolumeAdjustmentConfig] Loaded 0 entries from config file... [AutomaticVolumeAdjustment] initialize config values... [EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat' not showing fine-tuning wizard, config variable doesn't exist showtestcard is false [SKIN] Parsing embedded skin <embedded-in-'Dummy'> setValue 0 Setvolume: 0 0 (raw) Setvolume: 63 63 (-1db) Test what (0,) Test source= <Components.Sources.ServiceEvent.ServiceEvent object at 0x15e212c> Test service= None Test source= <Components.Sources.ServiceEvent.ServiceEvent object at 0x15e212c> Test service= None Test what (0,) Test source= <Components.Sources.ServiceEvent.ServiceEvent object at 0x15e212c> Test service= None Test source= <Components.Sources.ServiceEvent.ServiceEvent object at 0x15e212c> Test service= None warning, skin is missing element boquet in <class 'Screens.ChannelSelection.ChannelSelection'> fp_control: SW Version 1.02 Model: ufs913 vBoxType: 9 Selected Model: Kathrein UFS912 frontpanel control utility init checkConfig configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S , WAKEUPDECREMENT 300 20 setbrightness: : Invalid argument [SKIN] No skin to read... warning, skin is missing element UnhandledKeyPixmap in <class 'Screens.UnhandledKey.UnhandledKey'> warning, skin is missing element From in <class 'Screens.Dish.Dish'> warning, skin is missing element Goto in <class 'Screens.Dish.Dish'> warning, skin is missing element posGoto in <class 'Screens.Dish.Dish'> warning, skin is missing element posFrom in <class 'Screens.Dish.Dish'> warning, skin is missing element turnTime in <class 'Screens.Dish.Dish'> RemovePopup, id = ZapError child has terminated pipes closed [ePopen] command: route -n | grep eth0 poll: unhandled POLLERR/HUP/NVAL for fd 30(16) playing 1:0:19:6B:C:85:C00000:0:0:0: [__evStart] [__evSeekableStatusChanged] not pauseable. RemovePopup, id = ZapError allocate channel.. 000c:0085 opening frontend 0 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported (0)tune RotorCmd ffffffff, lastRotorCmd ffffffff prepare_sat System 0 Freq 12304000 Pol 0 SR 27500000 INV 2 FEC 3 orbpos 192 system 0 modulation 1 pilot 2, rolloff 0 tuning to 1704 mhz OURSTATE: tuning allocate Channel: res 0 [eDVBCIInterfaces] addPMTHandler 1:0:19:6B:C:85:C00000:0:0:0: allocate demux child has terminated pipes closed 192.168 0.0.0.0 nameservers: [[192, 168, 10, 254], [0, 0, 0, 0]] read configured interface: {'lo': {'dhcp': False}, 'eth0': {'dhcp': False, 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 10, 130], 'address': [192, 168, 10, 122]}} self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [192, 168, 10, 122], 'up': True, 'mac': '02:fa:01:95:19:37', 'dhcp': False, 'bcast': [192, 168, 10, 255], 'netmask': [255, 255, 255, 0], 'gateway': [192, 168, 10, 130]}} poll: unhandled POLLERR/HUP/NVAL for fd 31(16) [SEC] invalidate current switch params [SEC] setVoltage 2 FE_ENABLE_HIGH_LNB_VOLTAGE: Operation not supported [SEC] sleep 10ms [SEC] setTone 1 [SEC] sleep 10ms [SEC] update current switch params [SEC] startTuneTimeout 5000 [SEC] setFrontend 1 setting frontend 0 (0)fe event: status 0, inversion off, m_tuning 1 [SEC] sleep 500ms (0)fe event: status 1f, inversion off, m_tuning 2 OURSTATE: ok [eDVBLocalTimerHandler] channel 0x17615f0 running [eEPGCache] channel 0x17615f0 running stop release channel timer ok ... now we start!! PATready DVB service failed to tune - error 2 RemovePopup, id = ZapError AddPopup, id = ZapError Timeout! [eDVBLocalTimerHandler] no transponder tuned... or no TDT/TOT avail .. try to use RTC :) [eDVBLocalTimerHandler] shit RTC not ready :( SCAN: the current channel's ID was not corrected - not adding channel. ignore sdt update data.... incorrect transponder tuned!!!
Gruß cpet
2x UFS910 <1Watt Titan
2x UFS913 mit e2
Epson Beamer EH-TW 5900 / Samsung LCD LE40 B650 / Samsung Plasma PS-42D4S AV-Receiver Onkyo TX-SR604 / Harmony 900
Kommentar
-
-
wie macht man bei der UFS913 eigentlich ein serielles Log, hatt ja keine Schnittstelle?
edit: hab schon rausgefunden das die Kiste ein RJ11 Anschluss als Serielle Schnittstelle hat.
Dann muß ich mir wohl nach dem Urlaub mal ein Kabel basteln!Zuletzt geändert von cpet; 18.09.2012, 22:31.Gruß cpet
2x UFS910 <1Watt Titan
2x UFS913 mit e2
Epson Beamer EH-TW 5900 / Samsung LCD LE40 B650 / Samsung Plasma PS-42D4S AV-Receiver Onkyo TX-SR604 / Harmony 900
Kommentar
-
log
Hallo
RJ11 auf RS232 Kabel brauchst du dafür.
Soll man bei Kathrein ESC bekommen.
Ich bin selber auch noch auf der Suche da nach..
laserjet------------------------------------------------------------------------------
3 x Kathrein 913 mit oscam mod
Dbox2 mit Petzeimage
2 x Fergison 102E mit Mod
Kommentar
-
Kabel
Danke dir für den link.
Kabel schon getestet ob`s funktioniert?
Ja uns stolzer Preis.
Gruß laserjet------------------------------------------------------------------------------
3 x Kathrein 913 mit oscam mod
Dbox2 mit Petzeimage
2 x Fergison 102E mit Mod
Kommentar
-
getestet hab ich´s nicht, werde mir selber ein´s machen nach meinem Urlaub, weil ich finde es eigentlich auch zu teuer
und so ein Telefonkabel mit RJ11 Stecker und einen RS232 hab ich hier noch rumliegen, das ist dann schnell selber gemacht,
muß dann nur noch herausbekommen wie die Belegung genau sein muß aber da kann ciccio81 ja vielleicht mal was zu schreiben!Gruß cpet
2x UFS910 <1Watt Titan
2x UFS913 mit e2
Epson Beamer EH-TW 5900 / Samsung LCD LE40 B650 / Samsung Plasma PS-42D4S AV-Receiver Onkyo TX-SR604 / Harmony 900
Kommentar
-
Kabel
Hallo
Schaue mal im Streamboard.
Da haben die einen extra thread für Kathrein.
Dort ist ein Anschlussschema bzw Bild wo man es sehen kann.
mfg laserjet------------------------------------------------------------------------------
3 x Kathrein 913 mit oscam mod
Dbox2 mit Petzeimage
2 x Fergison 102E mit Mod
Kommentar
-
@schischu
bei mir hat die mtd_fw.sum.bin jedesmal nur rund 1,4 mb. Bei deinem build ist sie rund 2,5 mb groß. drin müssten doch die beiden .elf dateien sein, oder?
# Create a jffs2 partition for fw's
# Size 8mb = -p0x800000
# Folder which contains fw's is -r fw
# e.g.
# .
# ./fw
# ./fw/audio.elf
# ./fw/video.elf
vielleicht kannst du ja mal ein e2 flash uppen?
EDIT:
habe versucht mein selbst gebautes image zu flaschen. bei der mtd_fw.sum.bin hatte ich eine fehlermeldung root bzw. uimage ging
das selbe problem war dann auch bei deinem xbmc image.
EDIT2:
das mit den elfs hat sich geklärt und ich nehme die aus dem xbmc image.
leider beibt das problem "loading modules" beim booten.
mm liegt das problem beim flash vorgang. 1 sec. für die mtd_fw erscheint mir viel zu kurz im gegensatz zum root (25sec) oder uimage (15sec.)Zuletzt geändert von m.vandyke; 27.09.2012, 15:36.kathrein ufs 913
cuberevo 7000 (RIP)
relook 210, relook 400, relook 300 (neumoimage)
Kommentar
Nicht konfiguriertes PHP-Modul
Einklappen
Kathrein UFS-913 Sammelthread
Einklappen
Kommentar