X

Kathrein UFC960 Enigma

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • NOA
    NOA
    Neuer Benutzer
    • 12.12.2009
    • 30

    #16
    Als Tuner ist der TDA10021HT DVB-C channel receiver Fabrikat Philips
    NXP DVB-C/MCNS
    channel receiver
    TDA10023HT

    Es gibt nicht viele Hersteller von Tuner. Egal welcher Receiverhersteller die beziehen fast immer vom gleicher Hersteller. Man müsste mal Prüfen welchen die Dream verwendet.

    Kommentar

    • kathi2
      Erfahrene Benutzer
      • 27.01.2008
      • 281

      #17
      fuer dvb-c karten gibt es einen device driver
      http://mercurial.intuxication.org/hg...nds/tda10021.c
      TDA10021 - Single Chip Cable Channel Receiver driver module used on the Siemens DVB-C cards
      TDA10023 - DVB-C decoder (as used in Philips CU1216-3 NIM and the Reelbox DVB-C tuner card)

      Kommentar

      • Thomas4711
        Erfahrene Benutzer
        • 14.08.2009
        • 37672

        #18
        Bitte keine offenen Links
        ---------------------------

        et10000; D-Cube R2; Prismcube Ruby; Venton HD1; Mara M9 u.a.m mit OpenATV 4.1
        Astra 19,2 und 28,2 an Atemio Multischalter Premium-Line 9/20
        Ligawo HDMI Matrix 4x2 - Multifunction per spdif an LG NB3530A 2.1 Soundbar

        Kommentar

        • obi
          obi
          SVN-.....
          • 04.01.2008
          • 24587

          #19
          RE: Kathrein UFC960 Enigma

          Original von NOA
          Hallo Leute, wollte mal versuchen ein Enigma für die Kathrein UFC 960 zu basteln. Würde mich freuen wenn ich dabei von euch hilfe bekommen kann.
          Habe es geschaft ein Enigma auf die Kiste zu bringen. Es sind noch viele Fehlermeldungen vorhanden, aber vieleicht ist es ein Anfang. Kann mit ftp zugreifen. Habe eine Festplatte und ein Stick dran.
          Meldet euch wenn Ihr Lust habt mit zu machen.
          Bis dann
          poste mal nen free bei der orginalsoft.

          ich denk auch da es an den bootargs liegt mem=128

          Kommentar

          • NOA
            NOA
            Neuer Benutzer
            • 12.12.2009
            • 30

            #20
            Hier mal den bootargs vom Org:

            ## Booting image at 80040000 ...
            Image Name: Linux-2.6.23.17-MB411_7109-STSDK
            Created: 2009-12-01 10:20:42 UTC
            Image Type: SuperH Linux Kernel Image (gzip compressed)
            Data Size: 1820947 Bytes = 1.7 MB
            Load Address: 84601000
            Entry Point: 84602000
            Verifying Checksum ... OK
            Uncompressing Kernel Image ... START = 202274
            END = 64890
            OK

            Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea=48
            64 coprocessor_mem=3m@0x04000000,3m@0x04300000 testmode=1 factorytest=1 stmmacet
            h=ethaddr:
            - 0x00000000 - 0 ...

            Linux version 2.6.23.17-MB411_7109-STSDK (kdhong@localhost.localdomain) (gcc ver
            sion 4.2.4 (snapshot) (STMicroelectronics/Linux Base 4.2.4-46)) #155 PREEMPT Tue
            Dec 1 11:20:38 CET 2009
            Booting machvec: mb448
            Node 0: start_pfn = 0x4600, low = 0x9900
            Zone PFN ranges:
            Normal 17920 -> 39168
            Movable zone start PFN for each node
            early_node_map[1] active PFN ranges
            0: 17920 -> 39168
            STMicroelectronics STb7109E Reference board initialisation
            STx7109 version 3.x
            Chip version 3.4
            Built 1 zonelists in Zone order. Total pages: 21082
            Kernel command line: console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysar
            ea=4864 coprocessor_mem=3m@0x04000000,3m@0x04300000 testmode=1 factorytest=1 stm
            maceth=ethaddr:000:55:0C:89:EB

            BPA2 (bigphysarea) @ 0x04a0f000 size 0x012fffff
            st-coprocessor: Region spans memory boundary
            st-coprocessor: Failed to reserve memory at 0x04300000
            PID hash table entries: 512 (order: 9, 2048 bytes)
            Using tmu for system timer
            Using 16.594 MHz high precision timer.
            Console: colour dummy device 80x25
            console [ttyAS0] enabled
            Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
            Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
            Memory: 61220k/84992k available (2537k kernel code, 642k data, 84k init)
            PVR=04061100 CVR=30480000 PRR=00009300
            I-cache : n_ways=2 n_sets=256 way_incr=8192
            I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
            D-cache : n_ways=2 n_sets=512 way_incr=16384
            D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
            Mount-cache hash table entries: 512
            CPU: STb7109
            NET: Registered protocol family 16
            Generic PHY: Registered new driver
            SCSI subsystem initialized
            usbcore: registered new interface driver usbfs
            usbcore: registered new interface driver hub
            usbcore: registered new device driver usb
            Time: SuperH clocksource has been installed.
            NET: Registered protocol family 2
            IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
            TCP established hash table entries: 4096 (order: 3, 32768 bytes)
            TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
            TCP: Hash tables configured (established 4096 bind 4096)
            TCP reno registered
            NTFS driver 2.1.28 [Flags: R/O].
            JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
            io scheduler noop registered
            io scheduler anticipatory registered (default)
            io scheduler deadline registered
            io scheduler cfq registered
            STMicroelectronics ASC driver initialized
            GPIO 4 3 is occupied by stasc
            GPIO 4 2 is occupied by stasc
            stasc.0: ttyAS0 at MMIO 0x18032000 (irq = 121) is a stasc
            stasc.1: ttyAS1 at MMIO 0x18033000 (irq = 120) is a stasc
            STMMAC driver:
            platform registration... <6>done!
            MAC 10/100
            Command Line = 172 console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea
            =4864 coprocessor_mem=3m@0x04000000,3m@0x04300000 testmode=1 factorytest=1 stmma
            ceth=ethaddr:

            Kommentar

            • NOA
              NOA
              Neuer Benutzer
              • 12.12.2009
              • 30

              #21
              Hier noch den Rest bzw. den Anfang.

              Board: STb7100-Mboard (MB411) [29-bit mode]


              U-Boot 1.3.1 (Sep 9 2009 - 01:47:24) - stm23-2008-06-03

              DRAM: 64 MB
              NOR: 16 MB
              In: serial
              Out: serial
              Err: serial
              Serial 3 Intialized
              VFD_Driver Init
              Test Class : GetInstance()
              UBootGlue.cpp at TestNimDevice ,555
              Checking NIM as DVB-C, LG TDMB G261 ( TDA10023 NXP )
              UBootGlue.cpp at TestNimDevice ,563
              Found NIM Device
              pending event = d
              Read 00000001ending data from uCom
              read bytes :[d1][8][ff][ff][ff][1][d7][d]
              Read Key Value = d108
              read bytes :[d1][8][ff][ff][ff][1][d7][d]
              Shift and Compare Key
              read bytes :[d1][8][ff][ff][ff][1][d7][d]
              read bytes :[d1][8][ff][ff][ff][1][d7][d]
              read bytes :[d1][8][ff][ff][ff][1][d7][d]
              read bytes :[d1][8][ff][ff][ff][1][d7][d]
              read bytes :[d1][8][ff][ff][ff][1][d7][d]
              read bytes :[d1][1][ff][ff][ff][1][d0][d]
              Shift and Compare Key
              Key Matched
              Find Matched Key Sequence
              Key Matched
              Test Class : GetInstance()
              Boot From Debug Mode On and Test Mode
              Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysare
              a=4864 coprocessor_mem=3m@0x04000000,3m@0x04300000
              Hit any key to stop autoboot: 0
              Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysare
              a=4864 coprocessor_mem=3m@0x04000000,3m@0x04300000 testmode=1 factorytest=1
              ethaddr =

              new Params = console=ttyAS0,115200 root=/dev/mtdblock3 mem=83m bigphysarea=4864
              coprocessor_mem=3m@0x04000000,3m@0x04300000 testmode=1 factorytest=1 stmmaceth=e
              thaddr:

              Kommentar

              • dark
                Benutzer
                • 16.06.2008
                • 75

                #22
                habe nochmal in den avs driver geschaut. avs.ko type=fake_avs

                die bootargs würde ich mal auf mem=83m ändern, statt mem=128m.

                tuner: da muß man erst mal im original mit i2cdump schauen in welcher i2c 0/1 oder 3 und welche add der tuner hat zb 0x68 usw.

                Kommentar

                • NOA
                  NOA
                  Neuer Benutzer
                  • 12.12.2009
                  • 30

                  #23
                  Danke für die Antwort! Werde ich gleich mal ausprobieren.
                  Was meinst Du mit "avs.ko type=fake_avs" Wenn ich Dich richtig verstehe kann ich das vernachlässigen?

                  Kommentar

                  • NOA
                    NOA
                    Neuer Benutzer
                    • 12.12.2009
                    • 30

                    #24
                    Nach ändern auf mem=83 sieht es so aus:
                    Board: STb7100-Mboard (MB411) [29-bit mode]


                    U-Boot 1.3.1 (Sep 9 2009 - 01:47:24) - stm23-2008-06-03

                    DRAM: 64 MB
                    NOR: 16 MB
                    In: serial
                    Out: serial
                    Err: serial
                    Serial 3 Intialized
                    VFD_Driver Init
                    Test Class : GetInstance()
                    UBootGlue.cpp at TestNimDevice ,555
                    Checking NIM as DVB-C, LG TDMB G261 ( TDA10023 NXP )
                    UBootGlue.cpp at TestNimDevice ,563
                    Found NIM Device
                    Test Class : GetInstance()
                    Test Class : GetInstance()
                    RawBuffer.cpp at RawBuffer ,29
                    FD = 0
                    SWRecoveryHandler.cpp at Recover ,46
                    No Recovery Needed
                    End of testCpp
                    Hit any key to stop autoboot: 0
                    Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.25:19
                    2.168.1.15:192.168.1.1:255.255.255.0:kathrein:eth0ff mem=83m init=/bin/devinit
                    coprocessor_mem=4m@0x10000000,4m@0x10400000
                    ethaddr = 000:55:0C:89:EB

                    new Params = console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.25:192.168.1
                    .15:192.168.1.1:255.255.255.0:kathrein:eth0ff mem=83m init=/bin/devinit coproc
                    essor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:

                    ## Booting image at a0040000 ...
                    Image Name: Linux-2.6.17.14_stm22_0041
                    Created: 2009-12-19 17:19:50 UTC
                    Image Type: SuperH Linux Kernel Image (gzip compressed)
                    Data Size: 1642670 Bytes = 1.6 MB
                    Load Address: 84001000
                    Entry Point: 84002000
                    Verifying Checksum ... OK
                    Uncompressing Kernel Image ... START = 191260
                    END = 97511
                    OK

                    Warning: Unable to determine if kernel is built for 29- or 32-bit mode!

                    Starting kernel console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.25:192.16
                    8.1.15:192.168.1.1:255.255.255.0:kathrein:eth0ff mem=83m init=/bin/devinit cop
                    rocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:
                    - 0x00000000 - 0 ...

                    INIT: version 2.86 booting
                    INIT: Entering runlevel: 3
                    INIT: no more processes left in this runlevel
                    [rcS] start /etc/init.d/rcS
                    [rcS] mount var
                    [rcS] start inetd
                    Mount /dev in tmpfs
                    Copying device nodes to /dev
                    Starting DEBUG Interface
                    Mounting local filesystems...
                    Cleaning /tmp.
                    Hostname: AAF-ufs922.
                    [rcS] start /var/etc/init.d/start.sh first &
                    init stmfb
                    [rcS] start /var/etc/init.d/start.sh ba
                    ln: /usr/local/share/enigma2/timers.xml: File exists
                    LOADING MODULES
                    Model: ufs922
                    vBoxType: 3
                    Selected Model: Kathrein UFS922 frontpanel control utility
                    init
                    checkConfig
                    configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
                    , WAKEUPDECREMENT 300
                    3
                    Model: ufs922
                    vBoxType: 3
                    Selected Model: Kathrein UFS922 frontpanel control utility
                    init
                    checkConfig
                    configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
                    , WAKEUPDECREMENT 300
                    load a/v firmware
                    copLoadFile (file /boot/video.elf)
                    copLoadFile (file /boot/audio.elf)
                    init embx
                    init AVS
                    insmod: cannot insert '/lib/modules/avs.ko': Input/output error
                    init player
                    insmod: cannot insert '/lib/modules/stmdvb.ko': unknown symbol in module
                    insmod: cannot insert '/lib/modules/player2.ko': unknown symbol in module
                    insmod: cannot insert '/lib/modules/sth264pp.ko': unknown symbol in module
                    insmod: cannot insert '/lib/modules/stmalloc.ko': unknown symbol in module
                    [BOOTLOGO] start /var/etc/boot/bootlogo.sh
                    init frontpanel
                    [BOOTLOGO] use bootlogo
                    mknod: /dev/rc: File exists
                    Model: ufs922
                    vBoxType: 3
                    Input device name: "TDT RC event driver"
                    Selected Remote: Kathrein UFS922 RemoteControl
                    RemoteControl Map:
                    MEDIA - D5 - 226
                    ARCHIVE - 46 - 361
                    MENU - 54 - 139
                    RED - 6D - 398
                    GREEN - 6E - 399
                    YELLOW - 6F - 400
                    BLUE - 70 - 401
                    EXIT - 55 - 102
                    TEXT - 3C - 388
                    EPG - 4C - 365
                    REWIND - 21 - 168
                    FASTFORWARD - 20 - 208
                    PLAY - 38 - 207
                    PAUSE - 39 - 119
                    RECORD - 37 - 167
                    STOP - 31 - 128
                    STANDBY - 0C - 116
                    MUTE - 0D - 113
                    CHANNELUP - 1E - 104
                    CHANNELDOWN - 1F - 109
                    VOLUMEUP - 10 - 115
                    VOLUMEDOWN - 11 - 114
                    INFO - 0F - 138
                    OK - 5C - 352
                    UP - 58 - 103
                    RIGHT - 5B - 106
                    DOWN - 59 - 108
                    LEFT - 5A - 105
                    0BUTTON - 00 - 11
                    1BUTTON - 01 - 2
                    2BUTTON - 02 - 3
                    3BUTTON - 03 - 4
                    4BUTTON - 04 - 5
                    5BUTTON - 05 - 6
                    6BUTTON - 06 - 7
                    7BUTTON - 07 - 8
                    8BUTTON - 08 - 9
                    9BUTTON - 09 - 10
                    Frontpanel Map:
                    FP_MENU - 80 - 139
                    FP_EXIT - 0D - 102
                    FP_OK - 04 - 352
                    FP_WHEEL_LEFT - 0F - 103
                    FP_WHEEL_RIGHT - 0E - 108
                    toggleFeedback = 0, maxRate = 2, maxDelay 500
                    pRead >
                    [rcS] start /var/etc/autostart/start.sh e2
                    Set Fan Speed
                    [start.sh] [e2] setvolume
                    showSinglePic /var/etc/boot/bootlogo.mvi
                    VIDEO_SET_FORMAT failed (Bad file descriptor)
                    cat: can't open '/var/etc/automount/automounts.xml': No such file or directory
                    [setvolume] start volume
                    *** InfoBox v1.4 by GOst4711 ***
                    720x576, 32bpp
                    Freetype <Schrift "/usr/share/fonts/default.ttf" geladen>
                    MaxStringLen=298
                    *** InfoBox v1.4 by GOst4711 ***
                    720x576, 32bpp
                    Freetype <Schrift "/usr/share/fonts/default.ttf" geladen>
                    MaxStringLen=550

                    Kommentar


                    • #25
                      könntest die logs eventuell immer in .txt oder so anhängen?

                      würd die Sache übersichtlicher machen....

                      Kommentar

                      • NOA
                        NOA
                        Neuer Benutzer
                        • 12.12.2009
                        • 30

                        #26
                        und wenn ich nach Fehler letzten Reboot OK= Fortsetzen sage kommt das:

                        160 - OK
                        pRead <
                        Sat Dec 12 20:00:00 UTC 1970
                        pRead >
                        Model: ufs922
                        vBoxType: 3
                        Selected Model: Kathrein UFS922 frontpanel control utility
                        init
                        checkConfig
                        configs: DISPLAY = 1, DISPLAYCUSTOM = 1, CUSTOM = %H:%M:%S
                        , WAKEUPDECREMENT 300
                        LOADING e2
                        [rcS] starting e2->
                        PYTHONPATH: /usr/lib/enigma2/python
                        + (1) Background File Eraser
                        + ( graphics acceleration manager
                        STMFB accel interface available

                        + (9) gLCDDC
                        couldn't open LCD - load lcd.o!
                        + (9) GFBDC
                        12288k video mem
                        10668kB available for acceleration surfaces.
                        resolution: 720 x 576 x 32 (stride: 2880)
                        + (9) Font Render Class
                        [FONT] initializing lib...
                        [FONT] loading fonts...
                        [FONT] Intializing font cache, using max. 4MB...
                        + (10) gRC
                        RC thread created successfully
                        + (15) eWindowStyleManager
                        + (20) DVB-CI UI
                        eDVBCI_UI >
                        eDVBCI_UI <
                        + (20) misc options
                        + (20) UHF Modulator
                        couldnt open /dev/rfmod0!!!!
                        + (20) AVSwitch Driver
                        couldnt open /dev/dbox/fp0 to monitor vcr scart slow blanking changed!
                        + (20) RC Input layer
                        + (21) Console RC Driver
                        failed to open /dev/vc/0
                        + (21) input device driver
                        Input device "TDT RC event driver" is not a keyboard.
                        failed to open /dev/input/event1
                        Input device "" is not a keyboard.
                        failed to open /dev/input/event2
                        Input device "" is not a keyboard.
                        failed to open /dev/input/event3
                        Input device "" is not a keyboard.
                        Found 4 input devices!
                        + (30) eActionMap
                        + (35) CI Slots
                        scanning for common interfaces..
                        /dev/dvb/adapter0/ci0: No such device
                        /dev/dvb/adapter0/ci1: No such device
                        stat on /dev/dvb/adapter0/ci2 failed

                        CI Slot 0 setSource(0)
                        CI Slot 1 setSource(0)
                        eDVBCIInterfaces->setInputSource(0, 0)
                        eDVBCIInterfaces->setInputSource(1, 1)
                        cannot open /proc/stb/tsmux/input2
                        cannot open /proc/stb/tsmux/input3
                        done, found 2 common interface slots
                        + (40) eServiceCenter
                        settings instance.
                        + (41) eServiceFactoryFS
                        + (41) eServiceFactoryDVB
                        + (41) eServiceFactoryMP3
                        reached rl 70
                        ---- opening lame channel db
                        reading services (version 4)
                        loaded 4861 services
                        scanning for frontends..
                        opening frontend 0
                        failed! (/dev/dvb/adapter0/frontend0) No such device
                        failed! (/dev/dvb/adapter0/frontend0) No such device
                        opening frontend 1
                        failed! (/dev/dvb/adapter0/frontend1) No such device
                        failed! (/dev/dvb/adapter0/frontend1) No such device
                        found 1 adapter, 0 frontends(0 sim) and 3 demux, boxtype 5
                        RTC not ready... wait for transponder time
                        [EPGC] Initialized EPGCache
                        Loading spinners...
                        main thread is non-idle! display spinner!
                        no spinner DC!
                        found 7 spinner!

                        executing main
                        setIoPrio best-effort level 3 ok
                        close failed in file object destructor:
                        IOError: [Errno 5] Input/output error
                        close failed in file object destructor:
                        IOError: [Errno 5] Input/output error
                        main thread is non-idle! display spinner!
                        close failed in file object destructor:
                        IOError: [Errno 5] Input/output error
                        close failed in file object destructor:
                        IOError: [Errno 5] Input/output error
                        close failed in file object destructor:
                        IOError: [Errno 5] Input/output error
                        close failed in file object destructor:
                        IOError: [Errno 5] Input/output error
                        enumerating block devices...
                        found block device 'mtdblock4': blacklisted
                        found block device 'mtdblock3': blacklisted
                        found block device 'mtdblock2': blacklisted
                        found block device 'mtdblock1': blacklisted
                        found block device 'mtdblock0': blacklisted
                        found block device 'loop7': blacklisted
                        found block device 'loop6': blacklisted
                        found block device 'loop5': blacklisted
                        found block device 'loop4': blacklisted
                        found block device 'loop3': blacklisted
                        found block device 'loop2': blacklisted
                        found block device 'loop1': blacklisted
                        found block device 'loop0': blacklisted
                        found block device 'ram15': blacklisted
                        found block device 'ram14': blacklisted
                        found block device 'ram13': blacklisted
                        found block device 'ram12': blacklisted
                        found block device 'ram11': blacklisted
                        found block device 'ram10': blacklisted
                        found block device 'ram9': blacklisted
                        found block device 'ram8': blacklisted
                        found block device 'ram7': blacklisted
                        found block device 'ram6': blacklisted
                        found block device 'ram5': blacklisted
                        found block device 'ram4': blacklisted
                        found block device 'ram3': blacklisted
                        found block device 'ram2': blacklisted
                        found block device 'ram1': blacklisted
                        found block device 'ram0': blacklisted
                        close failed in file object destructor:
                        IOError: [Errno 5] Input/output error
                        Traceback (most recent call last):
                        File "/usr/lib/enigma2/python/mytest.py", line 20, in <module>
                        import Screens.InfoBar
                        File "InfoBar.py", line 2, in <module>
                        File "MovieSelection.py", line 1, in <module>
                        File "Screen.py", line 3, in <module>
                        File "GUISkin.py", line 1, in <module>
                        File "GUIComponent.py", line 1, in <module>
                        File "skin.py", line 40, in <module>
                        File "skin.py", line 31, in loadSkin
                        File "<string>", line 45, in parse
                        File "<string>", line 32, in parse
                        SyntaxError: not well-formed (invalid token): line 89, column 41
                        ---- saving lame channel db
                        saved 307 channels and 4861 services!
                        release cached channel (timer timeout)
                        - (41) eServiceFactoryFS
                        - (41) eServiceFactoryDVB
                        - (41) eServiceFactoryMP3
                        - (40) eServiceCenter
                        clear instance
                        - (35) CI Slots
                        deleteSessions >
                        deleteSessions <
                        deleteSessions >
                        deleteSessions <
                        - (30) eActionMap
                        - (21) Console RC Driver
                        - (21) input device driver
                        - (20) DVB-CI UI
                        - (20) misc options
                        - (20) UHF Modulator
                        - (20) AVSwitch Driver
                        - (20) RC Input layer
                        - (15) eWindowStyleManager
                        - (10) gRC
                        waiting for gRC thread shutdown
                        gRC thread has finished
                        - (9) gLCDDC
                        - (9) GFBDC
                        - (9) Font Render Class
                        - ( graphics acceleration manager
                        - (1) Background File Eraser
                        reached rl -1
                        [rcS] start /var/etc/autostart/start.sh reboot

                        Kommentar


                        • #27
                          außer daß überall noch alles auf den 922 eingestellt ist fängt der Fehler beim 1. log da an:

                          init AVS
                          insmod: cannot insert '/lib/modules/avs.ko': Input/output error

                          Kommentar

                          • dark
                            Benutzer
                            • 16.06.2008
                            • 75

                            #28
                            avs.ko type=fake_avs <- kann man nicht vernachlässigen. denn wenn avs.ko keine angabe des type hat wird ak4705 genommen. wird type=STV6412 eingestellt wird halt dieser genommen, und wenn kein STV6412 vorhanden, wir avs.ko nicht geladen.
                            deswegen die folgende fehler mit player2 usw.

                            deswegen hinter avs.ko type=fake_avs

                            Kommentar

                            • konfetti
                              AAF SVN Team
                              • 10.05.2008
                              • 1292

                              #29
                              Also die mem Angabe kann denke ich erstmal bleiben. Als erstes musst du den avs Treiber heile machen oder aber auf fake avs gehen. Leider ist im git beim fake avs ein Fehler. Die Zeilen 251 - 260 müßten in einer if-Abfrage eingeschlossen sein (if not fake avs). Das die restlichen Treiber nicht mehr laden ist erstmal ein Folgefehler des avs.
                              Ok funxen werden die Treiber so vermutlich nicht aber da kann man sich dann drum kümmern.

                              Was du auf jedenfall brauchst ist ein i2cdump aller i2c-Busse, PIO Pins etc.

                              Die Origapp (ich denke es ist auch die maruapp) macht häufig ganz nette Ausgaben. Du hast ja glaube ich ein com Kabel dran, also kannst du dir die startapp.sh und die start.sh nach /config kopieren und sie somit bearbeiten (wenn du kein com Kabel dran hast Finger weg!). Und danach in der startapp die Ausgabeumlenkung der maruapp abschalten. Aus den Ausgaben kann man dann ggf sehen was für einen avs Switch sie benutzen und ggf auch was für einen Tuner ...

                              Kommentar

                              • NOA
                                NOA
                                Neuer Benutzer
                                • 12.12.2009
                                • 30

                                #30
                                Wie kann ich die geänderte Datei rcS wieder zurück schreiben?

                                Bringt Fehler 553 im Kathi Control Center.

                                Kommentar

                                Nicht konfiguriertes PHP-Modul

                                Einklappen

                                Kathrein UFC960 Enigma

                                Einklappen
                                Lädt...
                                X