Das ist ein wichtiges Thema.
X
X
-
Original von Pillendreher
Also noch einmal entpacken und dann make clean?Oder dann make yaud-enigma?
Ich mache es derzeit so bis mir jemand was besseres sagt:
- make clean
- git pull (brauchst du hier nicht)
- make yaud-engima2-nightly
- wenn er Abbricht wegen dieser fehlenden Dateien entpacke ich sie, denn erst dann gibt es den Ordner (make clean löscht den ja im tufsbox)
- make yaud-engima2-nightlyDreambox 8000S
Kathi UFS 912 / 910
Kommentar
-
Hi to all and thanks for this project!
Sorry but I dont speak German
Im using Ubuntu910
I've tried many times to compile following the procedure on this post but the compilation stops always with
the same error:
Ive tried make yaud-enigma2 and make yaud-enigma2-nightly
Code:make[1]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools» make all-recursive make[2]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools» Making all in devinit make[3]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/devinit» sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Werror -Wall -MT devinit.o -MD -MP -MF .deps/devinit.Tpo -c -o devinit.o devinit.c mv -f .deps/devinit.Tpo .deps/devinit.Po /bin/sh ../libtool --tag=CC --mode=link sh4-linux-gcc -Wall -Werror -Wall -o devinit devinit.o libtool: link: sh4-linux-gcc -Wall -Werror -Wall -o devinit devinit.o make[3]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/devinit» Making all in evremote2 make[3]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/evremote2» sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT evremote.o -MD -MP -MF .deps/evremote.Tpo -c -o evremote.o evremote.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/evremote.Tpo .deps/evremote.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT global.o -MD -MP -MF .deps/global.Tpo -c -o global.o global.c global.c: In function ‘printKeyMap’: global.c:94: warning: control reaches end of non-void function mv -f .deps/global.Tpo .deps/global.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT remotes.o -MD -MP -MF .deps/remotes.Tpo -c -o remotes.o remotes.c remotes.c: In function ‘selectRemote’: remotes.c:29: warning: assignment from incompatible pointer type mv -f .deps/remotes.Tpo .deps/remotes.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT Ufs910_1W.o -MD -MP -MF .deps/Ufs910_1W.Tpo -c -o Ufs910_1W.o Ufs910_1W.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/Ufs910_1W.Tpo .deps/Ufs910_1W.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT Ufs910_14W.o -MD -MP -MF .deps/Ufs910_14W.Tpo -c -o Ufs910_14W.o Ufs910_14W.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/Ufs910_14W.Tpo .deps/Ufs910_14W.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT Tf7700.o -MD -MP -MF .deps/Tf7700.Tpo -c -o Tf7700.o Tf7700.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/Tf7700.Tpo .deps/Tf7700.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT Ufs922.o -MD -MP -MF .deps/Ufs922.Tpo -c -o Ufs922.o Ufs922.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/Ufs922.Tpo .deps/Ufs922.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT HDBOX.o -MD -MP -MF .deps/HDBOX.Tpo -c -o HDBOX.o HDBOX.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/HDBOX.Tpo .deps/HDBOX.Po /bin/sh ../libtool --tag=CC --mode=link sh4-linux-gcc -Wall -Wall -lrt -o evremote2 evremote.o global.o remotes.o Ufs910_1W.o Ufs910_14W.o Tf7700.o Ufs922.o HDBOX.o libtool: link: sh4-linux-gcc -Wall -Wall -o evremote2 evremote.o global.o remotes.o Ufs910_1W.o Ufs910_14W.o Tf7700.o Ufs922.o HDBOX.o -lrt make[3]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/evremote2» Making all in libdreamdvd make[3]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/libdreamdvd» /bin/sh ../libtool --tag=CC --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c -o main.lo main.c libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c main.c -fPIC -DPIC -o .libs/main.o In file included from main.c:26: main.h:71:2: warning: #warning "assume api v3 when byte order is little endian !!" main.c: In function ‘ddvd_run’: main.c:1526: warning: unused variable ‘start’ main.c:2187: warning: unused variable ‘start’ main.c:2250: warning: label ‘err_open_output_fd’ defined but not used main.c:2246: warning: label ‘err_open_fdaudio’ defined but not used main.c: In function ‘ddvd_spu_decode_data’: main.c:2440: warning: unused variable ‘menubutton’ main.c: In function ‘ddvd_resize_pixmap_1bpp’: main.c:2772: warning: unused variable ‘yoffset2’ libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c main.c -o main.o >/dev/null 2>&1 mv -f .deps/main.Tpo .deps/main.Plo /bin/sh ../libtool --tag=CC --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c -o mpegaudio_enc.lo mpegaudio_enc.c libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c mpegaudio_enc.c -fPIC -DPIC -o .libs/mpegaudio_enc.o libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c mpegaudio_enc.c -o mpegaudio_enc.o >/dev/null 2>&1 mv -f .deps/mpegaudio_enc.Tpo .deps/mpegaudio_enc.Plo /bin/sh ../libtool --tag=CC --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c -o a52_dec.lo a52_dec.c libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c a52_dec.c -fPIC -DPIC -o .libs/a52_dec.o libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c a52_dec.c -o a52_dec.o >/dev/null 2>&1 mv -f .deps/a52_dec.Tpo .deps/a52_dec.Plo /bin/sh ../libtool --tag=CC --mode=link sh4-linux-gcc -Wall -ldvdnav -o libdreamdvd.la -rpath /lib main.lo mpegaudio_enc.lo a52_dec.lo libtool: link: sh4-linux-gcc -shared .libs/main.o .libs/mpegaudio_enc.o .libs/a52_dec.o /usr/lib/libdvdnav.so -Wl,-soname -Wl,libdreamdvd.so.0 -o .libs/libdreamdvd.so.0.0.0 /usr/lib/libdvdnav.so: could not read symbols: File in wrong format collect2: ld returned 1 exit status make[3]: *** [libdreamdvd.la] Errore 1 make[3]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/libdreamdvd» make[2]: *** [all-recursive] Errore 1 make[2]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools» make[1]: *** [all] Errore 2 make[1]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools» make: *** [.deps/misc-tools] Errore 2
Thanks in advance.
Kommentar
-
Hallo zusammen,
bei mir erstellt gerade ein e2-Image und wollte mal wissen was passiert wenn ich fertig bin?
Kann ich das dann mittels KCC flashen?
Wie verhält sich das mit dem U-Boot (wie ich gesehen habe wird das mitgebaut), speziell beim Weihnachtsimage ist doch eine Änderung im Bootloader notwendig damit es Funktioniert, müsste diese Änderung dann hier auch vorher durchgeführt werden?
Kann man den Inhalt des cvs/cdk/root auch als BA-Image verwenden?
Kann ich das ganze einfach mal ausprobieren? (TFTP-Boot / NFS-Boot o.Ä.)?
Danke für eure Hilfe
greetz rico
Kommentar
-
same error also from root
Code:configure: creating ./config.status config.status: creating Makefile config.status: creating devinit/Makefile config.status: creating evremote2/Makefile config.status: creating libdreamdvd/Makefile config.status: creating libdreamdvd/libdreamdvd.pc config.status: creating libeplayer2/Makefile config.status: creating fp_control/Makefile config.status: creating showiframe/Makefile config.status: creating stfbcontrol/Makefile config.status: creating streamproxy/Makefile config.status: creating ustslave/Makefile config.status: creating tffpctl/Makefile config.status: creating tfd2mtd/Makefile config.status: creating hotplug/Makefile config.status: creating libcoolstream/Makefile config.status: creating config.h config.status: executing depfiles commands config.status: executing libtool commands configure: WARNING: unrecognized options: --with-driver, --with-dvbincludes, --enable-ccache make -C /tdt/tdt/cvs/apps/misc/tools all install DESTDIR=/tdt/tdt/tufsbox/cdkroot \ \ \ \ \ \ \ make[1]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools» make all-recursive make[2]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools» Making all in devinit make[3]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools/devinit» sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Werror -Wall -MT devinit.o -MD -MP -MF .deps/devinit.Tpo -c -o devinit.o devinit.c mv -f .deps/devinit.Tpo .deps/devinit.Po /bin/sh ../libtool --tag=CC --mode=link sh4-linux-gcc -Wall -Werror -Wall -o devinit devinit.o libtool: link: sh4-linux-gcc -Wall -Werror -Wall -o devinit devinit.o make[3]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools/devinit» Making all in evremote2 make[3]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools/evremote2» sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT evremote.o -MD -MP -MF .deps/evremote.Tpo -c -o evremote.o evremote.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/evremote.Tpo .deps/evremote.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT global.o -MD -MP -MF .deps/global.Tpo -c -o global.o global.c global.c: In function ‘printKeyMap’: global.c:94: warning: control reaches end of non-void function mv -f .deps/global.Tpo .deps/global.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT remotes.o -MD -MP -MF .deps/remotes.Tpo -c -o remotes.o remotes.c remotes.c: In function ‘selectRemote’: remotes.c:29: warning: assignment from incompatible pointer type mv -f .deps/remotes.Tpo .deps/remotes.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT Ufs910_1W.o -MD -MP -MF .deps/Ufs910_1W.Tpo -c -o Ufs910_1W.o Ufs910_1W.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/Ufs910_1W.Tpo .deps/Ufs910_1W.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT Ufs910_14W.o -MD -MP -MF .deps/Ufs910_14W.Tpo -c -o Ufs910_14W.o Ufs910_14W.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/Ufs910_14W.Tpo .deps/Ufs910_14W.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT Tf7700.o -MD -MP -MF .deps/Tf7700.Tpo -c -o Tf7700.o Tf7700.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/Tf7700.Tpo .deps/Tf7700.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT Ufs922.o -MD -MP -MF .deps/Ufs922.Tpo -c -o Ufs922.o Ufs922.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/Ufs922.Tpo .deps/Ufs922.Po sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -Wall -MT HDBOX.o -MD -MP -MF .deps/HDBOX.Tpo -c -o HDBOX.o HDBOX.c remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used mv -f .deps/HDBOX.Tpo .deps/HDBOX.Po /bin/sh ../libtool --tag=CC --mode=link sh4-linux-gcc -Wall -Wall -lrt -o evremote2 evremote.o global.o remotes.o Ufs910_1W.o Ufs910_14W.o Tf7700.o Ufs922.o HDBOX.o libtool: link: sh4-linux-gcc -Wall -Wall -o evremote2 evremote.o global.o remotes.o Ufs910_1W.o Ufs910_14W.o Tf7700.o Ufs922.o HDBOX.o -lrt make[3]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools/evremote2» Making all in libdreamdvd make[3]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools/libdreamdvd» /bin/sh ../libtool --tag=CC --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c -o main.lo main.c libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c main.c -fPIC -DPIC -o .libs/main.o In file included from main.c:26: main.h:71:2: warning: #warning "assume api v3 when byte order is little endian !!" main.c: In function ‘ddvd_run’: main.c:1526: warning: unused variable ‘start’ main.c:2187: warning: unused variable ‘start’ main.c:2250: warning: label ‘err_open_output_fd’ defined but not used main.c:2246: warning: label ‘err_open_fdaudio’ defined but not used main.c: In function ‘ddvd_spu_decode_data’: main.c:2440: warning: unused variable ‘menubutton’ main.c: In function ‘ddvd_resize_pixmap_1bpp’: main.c:2772: warning: unused variable ‘yoffset2’ libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c main.c -o main.o >/dev/null 2>&1 mv -f .deps/main.Tpo .deps/main.Plo /bin/sh ../libtool --tag=CC --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c -o mpegaudio_enc.lo mpegaudio_enc.c libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c mpegaudio_enc.c -fPIC -DPIC -o .libs/mpegaudio_enc.o libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c mpegaudio_enc.c -o mpegaudio_enc.o >/dev/null 2>&1 mv -f .deps/mpegaudio_enc.Tpo .deps/mpegaudio_enc.Plo /bin/sh ../libtool --tag=CC --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c -o a52_dec.lo a52_dec.c libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c a52_dec.c -fPIC -DPIC -o .libs/a52_dec.o libtool: compile: sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c a52_dec.c -o a52_dec.o >/dev/null 2>&1 mv -f .deps/a52_dec.Tpo .deps/a52_dec.Plo /bin/sh ../libtool --tag=CC --mode=link sh4-linux-gcc -Wall -ldvdnav -o libdreamdvd.la -rpath /lib main.lo mpegaudio_enc.lo a52_dec.lo libtool: link: sh4-linux-gcc -shared .libs/main.o .libs/mpegaudio_enc.o .libs/a52_dec.o /usr/lib/libdvdnav.so -Wl,-soname -Wl,libdreamdvd.so.0 -o .libs/libdreamdvd.so.0.0.0 /usr/lib/libdvdnav.so: could not read symbols: File in wrong format collect2: ld returned 1 exit status make[3]: *** [libdreamdvd.la] Errore 1 make[3]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools/libdreamdvd» make[2]: *** [all-recursive] Errore 1 make[2]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools» make[1]: *** [all] Errore 2 make[1]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools» make: *** [.deps/misc-tools] Errore 2
Btw can anyone post a vmware image with everything ready to compile ? This could help a lot of people!
Thanks
Kommentar
-
@Pillendreher:
bin nicht sicher, weil ichs grad nicht testen kann (baut), aber kann sein, dass es beim make clean den ordner tufsbox vorher leert. oder zumindest das cdkroot.
würde also heissen er löscht auch die player2 files.
bin aber wie gesagt nicht sicher.
@rico-one:
zum mini kann ich dir nix sagen, weil ich das nicht drauf hab.
ba funktioniert ganz normal. du erzeugst ein tar.gz aus dem release-ordner und diesen installierst du wie gewohnt mit kcc oder mit mpi (ich nutz den mpi).
solange man in der bootp.conf nicht rootdelay auf einen wert <6 setzt, sollte es keine probleme geben.-= Kathi 910 =-
13°, 19.2°, 23.5°, 28,2° @ Moteck SG-2100A Rotor
Smargo SmartReader Plus
-= =-
Kommentar
Nicht konfiguriertes PHP-Modul
Einklappen
Anleitung e2 Image erstellen
Einklappen
Kommentar