Das ist ein wichtiges Thema.
X
X

Anleitung e2 Image erstellen

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • Pillendreher
    Special VIP
    • 05.07.2009
    • 4709

    #31
    Also noch einmal entpacken und dann make clean?Oder dann make yaud-enigma?
    Und spart euch die Geschichten,
    ich trag meine tief hier drin.
    Ihr habt nur ein paar mehr Statisten,
    wo ich oft alleine bin.
    Wir sehen uns irgendwann, in Berlin.

    Kommentar

    • MichaelAnders
      Erfahrene Benutzer
      • 05.01.2009
      • 269

      #32
      Original von Pillendreher
      Also noch einmal entpacken und dann make clean?Oder dann make yaud-enigma?
      "make clean" brauchst Du nicht - das wäre nur, wenn sich an z.B. c oder py Dateien was geändert hätte damit neu compiled wird.

      Ich mache es derzeit so bis mir jemand was besseres sagt:
      - make clean
      - git pull (brauchst du hier nicht)
      - make yaud-engima2-nightly
      - wenn er Abbricht wegen dieser fehlenden Dateien entpacke ich sie, denn erst dann gibt es den Ordner (make clean löscht den ja im tufsbox)
      - make yaud-engima2-nightly
      Dreambox 8000S
      Kathi UFS 912 / 910

      Kommentar

      • Pillendreher
        Special VIP
        • 05.07.2009
        • 4709

        #33
        Fängt er dann eig. noch einmal von vorne an?
        Und spart euch die Geschichten,
        ich trag meine tief hier drin.
        Ihr habt nur ein paar mehr Statisten,
        wo ich oft alleine bin.
        Wir sehen uns irgendwann, in Berlin.

        Kommentar

        • Thomas4711
          Erfahrene Benutzer
          • 14.08.2009
          • 37672

          #34
          nein eigentlich nicht
          ---------------------------

          et10000; D-Cube R2; Prismcube Ruby; Venton HD1; Mara M9 u.a.m mit OpenATV 4.1
          Astra 19,2 und 28,2 an Atemio Multischalter Premium-Line 9/20
          Ligawo HDMI Matrix 4x2 - Multifunction per spdif an LG NB3530A 2.1 Soundbar

          Kommentar

          • t0mt0m
            Ehren VIP
            • 03.01.2008
            • 2687

            #35
            die ganzen downloads bleiben erhalten
            ### Atemio AM 500 HD ###
            ### Kathrein UFS 910 ###
            ### Kathrein UFS 912 ###

            Kommentar

            • MichaelAnders
              Erfahrene Benutzer
              • 05.01.2009
              • 269

              #36
              Genau - der Build dauert dann immer nur ein paar Minuten statt mehr als eine Stunde im "ganz neu" Fall
              Dreambox 8000S
              Kathi UFS 912 / 910

              Kommentar

              • BB2002
                Neuer Benutzer
                • 03.02.2008
                • 8

                #37
                Hi to all and thanks for this project!

                Sorry but I dont speak German

                Im using Ubuntu910

                I've tried many times to compile following the procedure on this post but the compilation stops always with
                the same error:
                Ive tried make yaud-enigma2 and make yaud-enigma2-nightly

                Code:
                	
                make[1]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools»
                make  all-recursive
                make[2]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools»
                Making all in devinit
                make[3]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/devinit»
                sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Werror -Wall  -MT devinit.o -MD -MP -MF .deps/devinit.Tpo -c -o devinit.o devinit.c
                mv -f .deps/devinit.Tpo .deps/devinit.Po
                /bin/sh ../libtool --tag=CC   --mode=link sh4-linux-gcc -Wall -Werror -Wall    -o devinit devinit.o  
                libtool: link: sh4-linux-gcc -Wall -Werror -Wall -o devinit devinit.o 
                make[3]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/devinit»
                Making all in evremote2
                make[3]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/evremote2»
                sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT evremote.o -MD -MP -MF .deps/evremote.Tpo -c -o evremote.o evremote.c
                remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                mv -f .deps/evremote.Tpo .deps/evremote.Po
                sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT global.o -MD -MP -MF .deps/global.Tpo -c -o global.o global.c
                global.c: In function ‘printKeyMap’:
                global.c:94: warning: control reaches end of non-void function
                mv -f .deps/global.Tpo .deps/global.Po
                sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT remotes.o -MD -MP -MF .deps/remotes.Tpo -c -o remotes.o remotes.c
                remotes.c: In function ‘selectRemote’:
                remotes.c:29: warning: assignment from incompatible pointer type
                mv -f .deps/remotes.Tpo .deps/remotes.Po
                sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT Ufs910_1W.o -MD -MP -MF .deps/Ufs910_1W.Tpo -c -o Ufs910_1W.o Ufs910_1W.c
                remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                mv -f .deps/Ufs910_1W.Tpo .deps/Ufs910_1W.Po
                sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT Ufs910_14W.o -MD -MP -MF .deps/Ufs910_14W.Tpo -c -o Ufs910_14W.o Ufs910_14W.c
                remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                mv -f .deps/Ufs910_14W.Tpo .deps/Ufs910_14W.Po
                sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT Tf7700.o -MD -MP -MF .deps/Tf7700.Tpo -c -o Tf7700.o Tf7700.c
                remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                mv -f .deps/Tf7700.Tpo .deps/Tf7700.Po
                sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT Ufs922.o -MD -MP -MF .deps/Ufs922.Tpo -c -o Ufs922.o Ufs922.c
                remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                mv -f .deps/Ufs922.Tpo .deps/Ufs922.Po
                sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT HDBOX.o -MD -MP -MF .deps/HDBOX.Tpo -c -o HDBOX.o HDBOX.c
                remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                mv -f .deps/HDBOX.Tpo .deps/HDBOX.Po
                /bin/sh ../libtool --tag=CC   --mode=link sh4-linux-gcc -Wall -Wall  -lrt  -o evremote2 evremote.o global.o remotes.o Ufs910_1W.o Ufs910_14W.o Tf7700.o Ufs922.o HDBOX.o  
                libtool: link: sh4-linux-gcc -Wall -Wall -o evremote2 evremote.o global.o remotes.o Ufs910_1W.o Ufs910_14W.o Tf7700.o Ufs922.o HDBOX.o  -lrt
                make[3]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/evremote2»
                Making all in libdreamdvd
                make[3]: ingresso nella directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/libdreamdvd»
                /bin/sh ../libtool --tag=CC   --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..     -Wall  -MT main.lo -MD -MP -MF .deps/main.Tpo -c -o main.lo main.c
                libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c main.c  -fPIC -DPIC -o .libs/main.o
                In file included from main.c:26:
                main.h:71:2: warning: #warning "assume api v3 when byte order is little endian !!"
                main.c: In function ‘ddvd_run’:
                main.c:1526: warning: unused variable ‘start’
                main.c:2187: warning: unused variable ‘start’
                main.c:2250: warning: label ‘err_open_output_fd’ defined but not used
                main.c:2246: warning: label ‘err_open_fdaudio’ defined but not used
                main.c: In function ‘ddvd_spu_decode_data’:
                main.c:2440: warning: unused variable ‘menubutton’
                main.c: In function ‘ddvd_resize_pixmap_1bpp’:
                main.c:2772: warning: unused variable ‘yoffset2’
                libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c main.c -o main.o >/dev/null 2>&1
                mv -f .deps/main.Tpo .deps/main.Plo
                /bin/sh ../libtool --tag=CC   --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..     -Wall  -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c -o mpegaudio_enc.lo mpegaudio_enc.c
                libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c mpegaudio_enc.c  -fPIC -DPIC -o .libs/mpegaudio_enc.o
                libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c mpegaudio_enc.c -o mpegaudio_enc.o >/dev/null 2>&1
                mv -f .deps/mpegaudio_enc.Tpo .deps/mpegaudio_enc.Plo
                /bin/sh ../libtool --tag=CC   --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..     -Wall  -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c -o a52_dec.lo a52_dec.c
                libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c a52_dec.c  -fPIC -DPIC -o .libs/a52_dec.o
                libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c a52_dec.c -o a52_dec.o >/dev/null 2>&1
                mv -f .deps/a52_dec.Tpo .deps/a52_dec.Plo
                /bin/sh ../libtool --tag=CC   --mode=link sh4-linux-gcc  -Wall  -ldvdnav  -o libdreamdvd.la -rpath /lib main.lo mpegaudio_enc.lo a52_dec.lo  
                libtool: link: sh4-linux-gcc -shared  .libs/main.o .libs/mpegaudio_enc.o .libs/a52_dec.o   /usr/lib/libdvdnav.so    -Wl,-soname -Wl,libdreamdvd.so.0 -o .libs/libdreamdvd.so.0.0.0
                /usr/lib/libdvdnav.so: could not read symbols: File in wrong format
                collect2: ld returned 1 exit status
                make[3]: *** [libdreamdvd.la] Errore 1
                make[3]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools/libdreamdvd»
                make[2]: *** [all-recursive] Errore 1
                make[2]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools»
                make[1]: *** [all] Errore 2
                make[1]: uscita dalla directory «/home/ale/tdt/tdt/cvs/apps/misc/tools»
                make: *** [.deps/misc-tools] Errore 2
                Can someone explain me how to fix it ?

                Thanks in advance.

                Kommentar

                • Pillendreher
                  Special VIP
                  • 05.07.2009
                  • 4709

                  #38
                  Did you use the "instruction" from the beginning of this thread?
                  Und spart euch die Geschichten,
                  ich trag meine tief hier drin.
                  Ihr habt nur ein paar mehr Statisten,
                  wo ich oft alleine bin.
                  Wir sehen uns irgendwann, in Berlin.

                  Kommentar

                  • BB2002
                    Neuer Benutzer
                    • 03.02.2008
                    • 8

                    #39
                    yes..

                    Now i try again..

                    Just one question

                    while doing all the procedure I must be root ?

                    before everything
                    sudo su (<< now i try with this)

                    and then everything else ?

                    thanks

                    Kommentar

                    • Pillendreher
                      Special VIP
                      • 05.07.2009
                      • 4709

                      #40
                      I used sudo -s the whole time
                      Und spart euch die Geschichten,
                      ich trag meine tief hier drin.
                      Ihr habt nur ein paar mehr Statisten,
                      wo ich oft alleine bin.
                      Wir sehen uns irgendwann, in Berlin.

                      Kommentar

                      • MichaelAnders
                        Erfahrene Benutzer
                        • 05.01.2009
                        • 269

                        #41
                        Original von BB2002
                        while doing all the procedure I must be root ?
                        No. You just need to be root for "./ubuntu910.sh" for example as in the instructions.

                        Rest you can do with normal user - or should be able to...
                        Dreambox 8000S
                        Kathi UFS 912 / 910

                        Kommentar

                        • rico-one
                          Neuer Benutzer
                          • 16.07.2008
                          • 10

                          #42
                          Hallo zusammen,

                          bei mir erstellt gerade ein e2-Image und wollte mal wissen was passiert wenn ich fertig bin?
                          Kann ich das dann mittels KCC flashen?
                          Wie verhält sich das mit dem U-Boot (wie ich gesehen habe wird das mitgebaut), speziell beim Weihnachtsimage ist doch eine Änderung im Bootloader notwendig damit es Funktioniert, müsste diese Änderung dann hier auch vorher durchgeführt werden?
                          Kann man den Inhalt des cvs/cdk/root auch als BA-Image verwenden?
                          Kann ich das ganze einfach mal ausprobieren? (TFTP-Boot / NFS-Boot o.Ä.)?

                          Danke für eure Hilfe

                          greetz rico

                          Kommentar

                          • BB2002
                            Neuer Benutzer
                            • 03.02.2008
                            • 8

                            #43
                            same error also from root

                            Code:
                            configure: creating ./config.status
                            config.status: creating Makefile
                            config.status: creating devinit/Makefile
                            config.status: creating evremote2/Makefile
                            config.status: creating libdreamdvd/Makefile
                            config.status: creating libdreamdvd/libdreamdvd.pc
                            config.status: creating libeplayer2/Makefile
                            config.status: creating fp_control/Makefile
                            config.status: creating showiframe/Makefile
                            config.status: creating stfbcontrol/Makefile
                            config.status: creating streamproxy/Makefile
                            config.status: creating ustslave/Makefile
                            config.status: creating tffpctl/Makefile
                            config.status: creating tfd2mtd/Makefile
                            config.status: creating hotplug/Makefile
                            config.status: creating libcoolstream/Makefile
                            config.status: creating config.h
                            config.status: executing depfiles commands
                            config.status: executing libtool commands
                            configure: WARNING: unrecognized options: --with-driver, --with-dvbincludes, --enable-ccache
                            make -C /tdt/tdt/cvs/apps/misc/tools all install DESTDIR=/tdt/tdt/tufsbox/cdkroot \
                            	 \
                            	 \
                            	 \
                            	 \
                            	 \
                            	 \
                            	
                            make[1]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools»
                            make  all-recursive
                            make[2]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools»
                            Making all in devinit
                            make[3]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools/devinit»
                            sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Werror -Wall  -MT devinit.o -MD -MP -MF .deps/devinit.Tpo -c -o devinit.o devinit.c
                            mv -f .deps/devinit.Tpo .deps/devinit.Po
                            /bin/sh ../libtool --tag=CC   --mode=link sh4-linux-gcc -Wall -Werror -Wall    -o devinit devinit.o  
                            libtool: link: sh4-linux-gcc -Wall -Werror -Wall -o devinit devinit.o 
                            make[3]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools/devinit»
                            Making all in evremote2
                            make[3]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools/evremote2»
                            sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT evremote.o -MD -MP -MF .deps/evremote.Tpo -c -o evremote.o evremote.c
                            remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                            mv -f .deps/evremote.Tpo .deps/evremote.Po
                            sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT global.o -MD -MP -MF .deps/global.Tpo -c -o global.o global.c
                            global.c: In function ‘printKeyMap’:
                            global.c:94: warning: control reaches end of non-void function
                            mv -f .deps/global.Tpo .deps/global.Po
                            sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT remotes.o -MD -MP -MF .deps/remotes.Tpo -c -o remotes.o remotes.c
                            remotes.c: In function ‘selectRemote’:
                            remotes.c:29: warning: assignment from incompatible pointer type
                            mv -f .deps/remotes.Tpo .deps/remotes.Po
                            sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT Ufs910_1W.o -MD -MP -MF .deps/Ufs910_1W.Tpo -c -o Ufs910_1W.o Ufs910_1W.c
                            remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                            mv -f .deps/Ufs910_1W.Tpo .deps/Ufs910_1W.Po
                            sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT Ufs910_14W.o -MD -MP -MF .deps/Ufs910_14W.Tpo -c -o Ufs910_14W.o Ufs910_14W.c
                            remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                            mv -f .deps/Ufs910_14W.Tpo .deps/Ufs910_14W.Po
                            sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT Tf7700.o -MD -MP -MF .deps/Tf7700.Tpo -c -o Tf7700.o Tf7700.c
                            remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                            mv -f .deps/Tf7700.Tpo .deps/Tf7700.Po
                            sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT Ufs922.o -MD -MP -MF .deps/Ufs922.Tpo -c -o Ufs922.o Ufs922.c
                            remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                            mv -f .deps/Ufs922.Tpo .deps/Ufs922.Po
                            sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..    -Wall -Wall  -MT HDBOX.o -MD -MP -MF .deps/HDBOX.Tpo -c -o HDBOX.o HDBOX.c
                            remotes.h:32: warning: ‘AvailableRemoteControls’ defined but not used
                            mv -f .deps/HDBOX.Tpo .deps/HDBOX.Po
                            /bin/sh ../libtool --tag=CC   --mode=link sh4-linux-gcc -Wall -Wall  -lrt  -o evremote2 evremote.o global.o remotes.o Ufs910_1W.o Ufs910_14W.o Tf7700.o Ufs922.o HDBOX.o  
                            libtool: link: sh4-linux-gcc -Wall -Wall -o evremote2 evremote.o global.o remotes.o Ufs910_1W.o Ufs910_14W.o Tf7700.o Ufs922.o HDBOX.o  -lrt
                            make[3]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools/evremote2»
                            Making all in libdreamdvd
                            make[3]: ingresso nella directory «/tdt/tdt/cvs/apps/misc/tools/libdreamdvd»
                            /bin/sh ../libtool --tag=CC   --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..     -Wall  -MT main.lo -MD -MP -MF .deps/main.Tpo -c -o main.lo main.c
                            libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c main.c  -fPIC -DPIC -o .libs/main.o
                            In file included from main.c:26:
                            main.h:71:2: warning: #warning "assume api v3 when byte order is little endian !!"
                            main.c: In function ‘ddvd_run’:
                            main.c:1526: warning: unused variable ‘start’
                            main.c:2187: warning: unused variable ‘start’
                            main.c:2250: warning: label ‘err_open_output_fd’ defined but not used
                            main.c:2246: warning: label ‘err_open_fdaudio’ defined but not used
                            main.c: In function ‘ddvd_spu_decode_data’:
                            main.c:2440: warning: unused variable ‘menubutton’
                            main.c: In function ‘ddvd_resize_pixmap_1bpp’:
                            main.c:2772: warning: unused variable ‘yoffset2’
                            libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT main.lo -MD -MP -MF .deps/main.Tpo -c main.c -o main.o >/dev/null 2>&1
                            mv -f .deps/main.Tpo .deps/main.Plo
                            /bin/sh ../libtool --tag=CC   --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..     -Wall  -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c -o mpegaudio_enc.lo mpegaudio_enc.c
                            libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c mpegaudio_enc.c  -fPIC -DPIC -o .libs/mpegaudio_enc.o
                            libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT mpegaudio_enc.lo -MD -MP -MF .deps/mpegaudio_enc.Tpo -c mpegaudio_enc.c -o mpegaudio_enc.o >/dev/null 2>&1
                            mv -f .deps/mpegaudio_enc.Tpo .deps/mpegaudio_enc.Plo
                            /bin/sh ../libtool --tag=CC   --mode=compile sh4-linux-gcc -DHAVE_CONFIG_H -I. -I..     -Wall  -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c -o a52_dec.lo a52_dec.c
                            libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c a52_dec.c  -fPIC -DPIC -o .libs/a52_dec.o
                            libtool: compile:  sh4-linux-gcc -DHAVE_CONFIG_H -I. -I.. -Wall -MT a52_dec.lo -MD -MP -MF .deps/a52_dec.Tpo -c a52_dec.c -o a52_dec.o >/dev/null 2>&1
                            mv -f .deps/a52_dec.Tpo .deps/a52_dec.Plo
                            /bin/sh ../libtool --tag=CC   --mode=link sh4-linux-gcc  -Wall  -ldvdnav  -o libdreamdvd.la -rpath /lib main.lo mpegaudio_enc.lo a52_dec.lo  
                            libtool: link: sh4-linux-gcc -shared  .libs/main.o .libs/mpegaudio_enc.o .libs/a52_dec.o   /usr/lib/libdvdnav.so    -Wl,-soname -Wl,libdreamdvd.so.0 -o .libs/libdreamdvd.so.0.0.0
                            /usr/lib/libdvdnav.so: could not read symbols: File in wrong format
                            collect2: ld returned 1 exit status
                            make[3]: *** [libdreamdvd.la] Errore 1
                            make[3]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools/libdreamdvd»
                            make[2]: *** [all-recursive] Errore 1
                            make[2]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools»
                            make[1]: *** [all] Errore 2
                            make[1]: uscita dalla directory «/tdt/tdt/cvs/apps/misc/tools»
                            make: *** [.deps/misc-tools] Errore 2
                            Anyone have an Idea ?


                            Btw can anyone post a vmware image with everything ready to compile ? This could help a lot of people!


                            Thanks

                            Kommentar

                            • officiallyme
                              Erfahrene Benutzer
                              • 08.05.2008
                              • 11380

                              #44
                              @Pillendreher:
                              bin nicht sicher, weil ichs grad nicht testen kann (baut), aber kann sein, dass es beim make clean den ordner tufsbox vorher leert. oder zumindest das cdkroot.
                              würde also heissen er löscht auch die player2 files.
                              bin aber wie gesagt nicht sicher.

                              @rico-one:
                              zum mini kann ich dir nix sagen, weil ich das nicht drauf hab.
                              ba funktioniert ganz normal. du erzeugst ein tar.gz aus dem release-ordner und diesen installierst du wie gewohnt mit kcc oder mit mpi (ich nutz den mpi).
                              solange man in der bootp.conf nicht rootdelay auf einen wert <6 setzt, sollte es keine probleme geben.
                              -= Kathi 910 =-
                              13°, 19.2°, 23.5°, 28,2° @ Moteck SG-2100A Rotor
                              Smargo SmartReader Plus

                              -= =-

                              Kommentar

                              • Direktor21
                                Neuer Benutzer
                                • 09.03.2009
                                • 33

                                #45
                                @rico-one
                                Habe es bei mir auf MINI2 instaliert und es funktioniert

                                Kommentar

                                Nicht konfiguriertes PHP-Modul

                                Einklappen

                                Anleitung e2 Image erstellen

                                Einklappen
                                Lädt...
                                X