Anleitung e2 Image erstellen

[Mark2]

Pinky1981/open-duckbox-project-sh4/pingulux-git:master

IOError: [Errno 5] Input/output error
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/mouse0' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/event2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 22] Invalid argument >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 25] Inappropriate ioctl for device >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js3' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js2' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js1' >
[iInputDevices] getInputDevices <ERROR: ioctl(EVIOCGNAME): [Errno 19] No such device: '/dev/input/js0' >
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
resolve: resolve ${datadir}/enigma2/keymap.xml
resolve: -> /usr/local/share/enigma2/keymap.xml
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[ePopen] command: ip -o addr
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating keymap: Keyboard English
resolve: resolve ${datadir}/keymaps/
resolve: -> /usr/local/share/keymaps/
Activating language English
language set to en_EN
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[eSocketMMIHandler] created successfully
getModeList for port Component
getModeList for port Scart
getModeList for port HDMI
getModeList for port HDMI-PC
hotplug on dvi
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
current port not available, not setting videomode
current port not available, not setting videomode
current port not available, not setting videomode
current port not available, not setting videomode
current port not available, not setting videomode
resolve: resolve ${datadir}/enigma2/
resolve: -> /usr/local/share/enigma2/
/usr/lib/enigma2/python/Plugins/SystemPlugins/CrashlogAutoSubmit/__init__.py:1: DeprecationWarning: the sha module is deprecated; use the hashlib module instead
import sha
Plugin SystemPlugins/CrashlogAutoSubmit failed to load: No module named mail
Traceback (most recent call last):
File "/usr/lib/enigma2/python/Components/PluginComponent.py", line 57, in readPluginList
plugin = my_import('.'.join(["Plugins", c, pluginname, "plugin"]))
File "/usr/lib/enigma2/python/Tools/Import.py", line 2, in my_import
mod = __import__(name)
File "/usr/lib/enigma2/python/Plugins/SystemPlugins/CrashlogAutoSubmit/plugin.py", line 20, in <module>
from twisted.mail import smtp, relaymanager
ImportError: No module named mail
skipping plugin.
Plugins
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
resolve: resolve ${sysconfdir}/enigma2/
resolve: -> /etc/enigma2/
--> applying pep values
couldn't apply pep values.
[CleanupWizard] freeSpaceAvailable--> 85144
starting hotplug handler
adding Resource DiseqcTester
resources: {'DiseqcTester': <function DiseqcTesterMain at 0xfa58ec>}
[CI_Assignment] activating ci configs:
[CI_Activate] FOUND 2 CI Slots
resolve: resolve ${sysconfdir}/enigma2/ci
resolve: -> /etc/enigma2/ci
[CI_Activate_Config_CI0] no config file found
[CI_Activate_Config_CI0] error parsing xml...
resolve: resolve ${sysconfdir}/enigma2/ci
resolve: -> /etc/enigma2/ci
[CI_Activate_Config_CI1] no config file found
[CI_Activate_Config_CI1] error parsing xml...
close failed in file object destructor:
IOError: [Errno 5] Input/output error
It's now Sat Jan 1 01:01:21 2000
[timer.py] next activation: 946684981 (in 99167 ms)
timers.xml not found!
wasTimerWakeup failed!
It's now Sat Jan 1 01:01:21 2000
[timer.py] next activation: 946684981 (in 99158 ms)
close failed in file object destructor:
IOError: [Errno 5] Input/output error
[EPGC] setCacheFile read/write epg data from/to '/hdd/epg.dat'
Reading ['/usr/lib/enigma2/python/Plugins/SystemPlugins/Videomode/videowizard.xml']
getStepWithID: start
result: nothing
('en_EN', ('English', 'en', 'EN'))
Looking for embedded skin
allocating new converter!
++++++++++++***++**** VideoWizard-createSummary
Looking for embedded skin
allocating new converter!
Updating values in step 1
set LCD text
wizard step: {'code': u'self["portpic"].show()\nself.clearSelectedKeys()\nself.selectKey( "OK")', 'text': 'Video input selection\n\nPlease press OK if you can see this page on your TV (or select a different input port).\n\nThe next input port will be automatically probed in 10 seconds.', 'displaytext': 'Select video input with up/down buttons', 'id': 'inputselection', 'condition': '', 'listevaluation': u'inputSelectionMade', 'timeoutaction': 'selectnext', 'nextstep': 'modeselection', 'code_async': '', 'codeafter_async': '', 'timeoutstep': '', 'list': [], 'onselect': u'inputSelectionMoved', 'dynamiclist': u'listInputChannels', 'timeout': 20, 'codeafter': '', 'config': {'screen': None, 'args': None, 'type': ''}}
wizard text Video input selection

Please press OK if you can see this page on your TV (or select a different input port).

The next input port will be automatically probed in 10 seconds.
set LCD text
code self["portpic"].show()
self.clearSelectedKeys()
self.selectKey("OK")
selectPic: arrowup
showing list, 1
self.list: <Components.Sources.List.List object at 0x134ab4c>
self.list: <Components.Sources.List.List object at 0x134ab4c>
setZPosition
dynamic list, calling listInputChannels
listInputChannels: [('Component', 'Component'), ('HDMI', 'HDMI'), ('HDMI-PC', 'HDMI-PC'), ('Scart', 'Scart')]
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: []
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: []
self.selection: Component
input selection moved: Component
inputSelect: Component
getModeList for port Component
modeList: []
showing config
close failed in file object destructor:
IOError: [Errno 5] Input/output error
setValue 100
Setvolume: 100 100 (raw)
Setvolume: 0 0 (-1db)
close failed in file object destructor:
IOError: [Errno 5] Input/output error
close failed in file object destructor:
IOError: [Errno 5] Input/output error
child has terminated
pipes closed
[ePopen] command: route -n | grep eth0
poll: unhandled POLLERR/HUP/NVAL for fd 303(16)
child has terminated
pipes closed
172.100
0.0.0.0
nameservers: [[192, 168, 178, 1], [217, 237, 150, 188], [193, 193, 158, 10]]
read configured interface: {'lo': {'dhcp': False}}
self.ifaces after loading: {'eth0': {'preup': False, 'predown': False, 'ip': [172, 100, 100, 249], 'up': True, 'netmask': [255, 255, 0, 0], 'dhcp': False, 'bcast': [172, 100, 255, 255], 'gateway': [172, 100, 100, 174]}}
timeoutCounter: 19
timeoutCounter: 18
timeoutCounter: 17
timeoutCounter: 16
timeoutCounter: 15
timeoutCounter: 14

*It hasn't image and tone...
What's wrong with GIT, it's not working like it should do on SPARK Sti 7111?

[Mark2]

New problems !!
Pinky1981/open-duckbox-project-sh4/pingulux-git:master

INIT: version 2.86 booting init frontpanel vfd_spark_123_179: module license 'fulansoft' taints kernel. Edisio argus vip2 second stage front panel driver CpuType = 2 DisplayInfo = 4 scankeyNum = 8 swMajorVersion = 9 swSubVersion = 0 input: argus vip2 frontpanel buttons as /class/input/input0 [simu_button] initializing ... [simu_button] allocating and registering button device input: TDT RC event driver as /class/input/input1 Mount /dev in tmpfs Copying device nodes to /dev Starting portmap daemon.... Starting DEBUG Interface Mounting local filesystems... mount: mounting tmpfs on /tmp failed: No such device Hostname: PinguLux. starting telnetd init stmfb stmcore-display: STi7111 display probed device probe found 2 display pipelines requesting frm: 'component.fw', c11b47e8/8279ddb0 frm 'component.fw' successfully loaded stmfb: fb0 parameters = "1280x720-32@50:12mal:yuv:yuv" stmfb: fb1 parameters = "<NULL>" LOADING MODULES load a firmware copLoadFile (file /boot/audio.elf) ustslave: Kernel Version: 23 base_address 0x40400000 seeking to 0 seeking to 5e00 seeking to 12460 seeking to 1ab60 seeking to 154300 seeking to 154338 seeking to 154370 seeking to 191a58 seeking to 191a60 seeking to 191a68 seeking to 191a70 seeking to 1aae40 seeking to 1aaf00 load v firmware copLoadFile (file /boot/video.elf) Segmentation fault init embx

[karlchen1963]

i don't see a video.elf in /boot

[heimi]

Unter debian kommt es beim Build von

stlinux24-target-glibc-2.10.1-21.src.rpm

zu folgendem Problem:

+ export CFLAGS=-fstack-protector-all -Wformat -Wformat-security -Os -g
export: 1: -Wformat: bad variable name

Ursache ist dass /bin/sh ein Symlink auf /bin/dash ist (sofern dash installiert ist und als sh Konfiguriert wurde)

Weiter gehts per
dpkg-reconfigure dash
und wählen von bash als Default Shell

Ganz am schluss beim make von yaud-enigma2 scheinen noch zwei

#include <cstdio>

zu fehlen in
encoding.cpp und rawfile.cpp
ansonsten gibts zB:

encoding.cpp:21:28: Fehler: »fopen« wurde in diesem Gültigkeitsbereich nicht definiert

Lt. meinen angestaubten C++ Kenntnissen ist das durchaus korrekt und nicht etwa ein Fehler in meiner Umgebung.

[mcron]

habe mal nen nightly e2 (stm24 207) für die vizyon820 gebaut.

geht soweit bis auf 2 sachen....
1. bei scart läuft hier das bild schräg durch....
2. es wird kein tuner erkannt bzw angezeigt

dachte das die treiber für cx24116 schon gehen oder sind die noch net im git drinnen ?

[schpuntik]

Kann es sein das e2 git vor 5 stunden geleert wurde? Wer kann das noch bestätigen?

[Alex-2.5]

Gerade geclont. Image gebaut, kein Problem....

[Thomas4711]

Also in Opendream ist zur zeit keine GIT Image

[karlchen1963]

So wie es aussieht sperrt DM alle anderen aus. Also wer noch was auf PC hat sichern!!

[Joker7]

..tja,offensichtlich wurde alles gelöscht und es werden künftig wahrscheinlich nur noch closed source Sachen drin sein....

[~sammy~]

..tja,offensichtlich wurde alles gelöscht und es werden künftig wahrscheinlich nur noch closed source Sachen drin sein....

Genauso ist es -> klick

[rd-kts]

Hallo !
Kann mich jemand weiter helfen?
==========
.
.
s=`cd ..; ${PWDCMD-pwd}`; export s; \
if [ -f dir.info ] ; then \
/usr/bin/install -c -m 644 dir.info /tdt/tdt/cvs/cdk/BUILDROOT/stlinux23-cross-binutils-2.18.50.0.8-34.i686/tdt/tdt/tufsbox/devkit/sh4/info/dir.info ; \
else true ; fi
make[1]: Verlasse Verzeichnis '/tdt/tdt/cvs/cdk/BUILD/binutils-2.18.50.0.8/objdir'
+ rm -f /tdt/tdt/cvs/cdk/BUILDROOT/stlinux23-cross-binutils-2.18.50.0.8-34.i686/tdt/tdt/tufsbox/devkit/sh4/info/dir
+ rm /tdt/tdt/cvs/cdk/BUILDROOT/stlinux23-cross-binutils-2.18.50.0.8-34.i686/tdt/tdt/tufsbox/devkit/sh4/info/{configure,standards}.*
rm: Entfernen von „/tdt/tdt/cvs/cdk/BUILDROOT/stlinux23-cross-binutils-2.18.50.0.8-34.i686/tdt/tdt/tufsbox/devkit/sh4/info/{configure,standards}.*“ nicht möglich: Datei oder Verzeichnis nicht gefunden
Fehler: Fehler-Status beim Beenden von /var/tmp/rpm-tmp.8uAQDr (%install)


Fehler beim Bauen des RPM:
Fehler-Status beim Beenden von /var/tmp/rpm-tmp.8uAQDr (%install)
make: *** [RPMS/i686/stlinux23-cross-sh4-binutils-2.18.50.0.8-34.i686.rpm] Fehler 1
root@rd-laptop:/tdt/tdt/cvs/cdk#
==============

ubuntu 10.04 e2 image für Spark gm reloadet

[rd-kts]

... alles klar. Hat sich erledigt.

[decembersoul]

ubuntu 10.04 e2 image für Spark gm reloadet

Hallo
Ich bin neu hier und versuche gerade mich etwas ein zu lesen.
Ziel ist es VDR auf einer günstigen Box zum laufen zu bekommen.
Die Golden Media 990 CR HD PVR Spark LX ist mit 120 Euro recht erschwinglich.
Zwar hat diese keine Festplatte aber speichern kann ich auf meinem NFS Server.

Wie ich lesen kann hast Du das e2 Image für die gm reloadet gebaut. Ist das die Golden Media 990 CR HD PVR Spark LX?
Wie läuft das Image und warum finde ich die Box nicht in der Liste der unterstützen Boxen?

[tiopedro1958]

...
18 spark = für GM 990 auswählen nach ./make.sh
...