nach einem Oneline-Update auf 1.88 reagierte die Box überhaupt nicht mehr auf die Fernbedienung.
Auch ein Update per USB-Stick führte zu diesem Ergebnis.
Bin jetzt zurück auf 1.87 und da ist wieder alles in Ordnung.
Gruß
In: serial Out: serial Err: serial selected Image to start: ----Flash---- no originalsoft detected, trying bootargs_0, if empty trying e2-bootargs... Hit any key to stop autoboot: 0 ## Booting image at a0040000 ... Image Name: Linux-2.6.32.71_stm24_0217 Image Type: SuperH Linux Kernel Image (gzip compressed) Data Size: 1853915 Bytes = 1.8 MB Load Address: 84001000 Entry Point: 84002000 Verifying Checksum ... OK Uncompressing Kernel Image ... OK Starting kernel console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.5.105:192.1 68.5.14:192.168.5.1:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0 x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:00:FF:54:7C:00:0 0 init=/bin/devinit - 0x00000000 - 0 ... INIT: version 2.88 booting [rcS] start /etc/init.d/rcS [rcS] booting ATEMIO_M44638_r985_ufs910_titan_update_v1.91 [rcS] mount VAR-FLASH (MTD3) [rcS] mount SWAP-FLASH (MTD4) /sbin/mount.sh: line 11: can't create /tmp/autofs.mount.log: Read-only file syst em /sbin/mount.sh: line 12: can't create /tmp/autofs.mount.log: Read-only file syst em /sbin/mount.sh: line 18: can't create /tmp/autofs.mount.log: Read-only file syst em /sbin/mount.sh: line 19: can't create /tmp/autofs.mount.log: Read-only file syst em [AutoFS-MOUNT] check directory pfad muss /autofs not /media/autofs [AutoFS-MOUNT] device: tmpfs [AutoFS-MOUNT] directory: /dev/shm [AutoFS-MOUNT] skip [rcS] start start.sh first titan ufs910 flash stm24 [start.sh] [first] start + SWTYPE=titan + player=191 + [ -e /var/etc/.firstnet ] + [ ! -e /etc/.usbimg ] + startUsbImage + grep stmfb + lsmod + wc -l + [ 0 -gt 0 ] + [ ! -f /var/etc/.multirun ] + return + startUserSettings+ startDebug + [ + [ ! -e /tmp/.init3 ] + -e /mnt/swapextensions ] + [ full = highstartup_progress + progress_skip=1 + echo [/var/etc/autostart/start.sh] startUserSettings [/var/etc/autostart/start.sh] startUserSettings ] + cat /mnt/config/smb.conf + wc -l + grep \[global\] + checksmb=1 + [ ! -e /mnt/config/smb.conf ] + [ 1 == 0 ] + sed -e 2,/\[/s/\[/|/ -e /|/,$ d -e s/ \+/ /g -e /^$/d -i /mnt/config/smb.conf + echo -e \n + echo [media] + echo comment = Media Files + echo path = /media + echo read only = no + echo public = yes + echo guest ok = yes + cat /etc/.arch + arch=sh4 + error=0 + [ ! -e /mnt/swapextensions ] + [ 0 = 0 ] + [ ! -e /mnt/network ] + [ 0 = 0 ] + [ ! -e /mnt/network/resolv.conf ] + [ 0 = 0 ] + [ ! -e /mnt/network/hosts ] + [ 0 = 0 ] + [ ! -e /mnt/network/hostname ] + [ 0 = 0 ] + [ ! -e /mnt/network/interfaces ] + [ 0 = 0 ] + [ ! -e /mnt/network/auto.misc ] + [ 0 = 0 ] + [ ! -e /mnt/network/default_gw ] + [ 0 = 0 ] + [ ! -e /mnt/network/passwd ] + [ 0 = 0 ] + [ ! -e /mnt/config ] + [ 0 = 0 ] + [ ! -e /mnt/config/start-config ] + [ 0 = 0 ] + [ ! -e /mnt/config/usercmd.sh ] + [ 0 = 0 ] + [ ! -e /mnt/config/usercmd.after.rec.sh ] + [ 0 = 0 ] + [ ! -e /mnt/config/titan.cfg ] + [ 0 = 0 ] + [ ! -e /mnt/config/rcconfig ] + [ 0 = 0 ] + [ ! -e /mnt/config/browserfav ] + [ 0 = 0 ] + [ ! -e /mnt/config/hbbtvfav ] + [ 0 = 0 ] + [ ! -e /mnt/config/inadyn.conf ] + [ 0 = 0 ] + [ ! -e /mnt/config/rcmap ] + [ 0 = 0 ] + [ ! -e /mnt/config/stock ] + [ 0 = 0 ] + [ ! -e /mnt/config/timers.xml ] + [ 0 = 0 ] + [ ! -e /mnt/config/weather ] + [ 0 = 0 ] + [ ! -e /mnt/config/smb.conf ] + [ 0 = 0 ] + [ ! -e /mnt/config/exports ] + [ 0 = 0 ] + [ ! -e /mnt/config/extepg ] + [ 0 = 0 ] + [ ! -e /mnt/config/playlist ] + [ 0 = 0 ] + [ ! -e /mnt/config/mostzap ] + [ 0 = 0 ] + [ ! -e /mnt/config/lastsubtitle ] + [ 0 = 0 ] + [ ! -e /mnt/config/skinconfig ] + [ 0 = 0 ] + [ ! -e /mnt/config/choices ] + [ 0 = 0 ] + [ ! -e /mnt/settings ] + [ 0 = 0 ] + [ ! -e /mnt/settings/bouquets.cfg ] + [ 0 = 0 ] + [ ! -e /mnt/settings/channel ] + [ 0 = 0 ] + [ ! -e /mnt/settings/provider ] + [ 0 = 0 ] + [ ! -e /mnt/settings/transponder ] + [ 0 = 0 ] + [ ! -e /mnt/settings/transponderencoding ] + [ 0 = 0 ] + [ ! -e /mnt/settings/satellites ] + [ 0 = 0 ] + [ ! -e /mnt/settings/epgchannel ] + [ 0 = 0 ] + [ ! -e /mnt/tpk ] + [ 0 = 0 ] + [ ! -e /mnt/script ] + [ sh4 == mipsel ] + [ 0 = 0 ] + [ -e /var/etc/.firststart ] + [ 0 != 0 ] + read model + [ ufs910 == ipbox910 ] + restartET0 + ifconfig eth0 up + startSATASwitch + startAutofs + echo [start.sh] Thread 1 start [start.sh] Thread 1 start + startCpufreq + [ -e /lib/modules/cpu_frequ.ko ] + echo [start.sh] [first] start autofs [start.sh] [first] start autofs + rm -f /media/net/* + echo [start.sh] [first] startCpufreq [start.sh] [first] startCpufreq + xinsmod /lib/modules/cpu_frequ.ko + rm -f /media/usb/* + [ -L /var/backup ] + [ -e /var/backup ] + [ -L /var/swapdir ] + [ -e /var/swapdir ] + [ -L /var/swap ] + [ -e /var/swap ] + [ -L /media/hdd ] + [ -e /media/hdd ] + echo [start.sh] [first] start load autofs [start.sh] [first] start load autofs + echo [start.sh] [first] start automount 1 [start.sh] [first] start automount 1 + /etc/init.d/autofs start Loading autofs Starting autofs + [ 0 -ne 0 ] + startHotplug + echo [start.sh] [first] start hotplug.sh first titan ufs910 [start.sh] [first] start hotplug.sh first titan ufs910 + /sbin/hotplug.sh first titan ufs910 BusyBox v1.27.2 (2019-01-24 10:08:05 CET) multi-call binary. Usage: basename FILE [SUFFIX] Strip directory path and .SUFFIX from FILE ln: /media/dvd: File exists + startConfig + echo [start.sh] [first] startConfig [start.sh] [first] startConfig + pal=pal + hdmi=50:12m + embxmailbox=mailbox0=0xb9211000:136:set2 mailbox1=0xb9212000:137:set2 + embxshm=mailbox0=shm:0:7:0x60000000:0:16:16:0:1024 :0xa4000000:0x10000000 + display=stx7100.ko + avs= + mmeName=MPEG2_TRANSFORMER0 + ci=cimax.ko + front=vfd.ko + tuner=cx24116.ko useUnknown=0 + grep -q ^firststart=1 /mnt/config/titan.cfg + titanfirststart=1 + grep -q -e ^av_videomode=576i50 -e ^av_videomode=pal /mnt/config/titan.cfg + res=1280x720-32 + startFrameBuffer + echo [start.sh] [first] init stmfb [start.sh] [first] init stmfb + xinsmod /lib/modules/stmcore-display-stx7100.ko + FBCHECK=insmod /lib/modules/stmfb.ko display0=1280x720-32@50:12m:pal:rgb:rgb + xinsmod /lib/modules/stmfb.ko display0=1280x720-32@50:12m:pal:rgb:rgb + echo [start.sh] [first] enable HDMI [start.sh] [first] enable HDMI + [ -e /var/etc/.scart ] + echo [start.sh] [first] enable SCART (576i) [start.sh] [first] enable SCART (576i) + res=720x576-32 + echo 50:12m + cut -d: -f1 + cut -d: -f2 + echo 50:12m + hdmi=50i:12m + rmmod stmfb.ko + FBCHECK=insmod /lib/modules/stmfb.ko display0=720x576-32@50i:12m:pal:cvbs + xinsmod /lib/modules/stmfb.ko display0=720x576-32@50i:12m:pal:cvbs + echo insmod /lib/modules/stmfb.ko display0=720x576-32@50i:12m:pal:cvbs + stfbset -p + xinsmod /lib/modules/stm_v4l2.ko + startBootlogo + echo [start.sh] [first] startBootlogo [start.sh] [first] startBootlogo + [ y == y ] + [ -e /mnt/swapextensions/etc/boot/bootlogo.jpg ] + [ -e /var/etc/boot/bootlogo.jpg ] + infobox 200 nobox#/var/etc/boot/bootlogo.jpg+ startVfd + echo [start.sh] [first] startVfd [start.sh] [first] startVfd + xinsmod /lib/modules/e2_proc.ko + [ ufs910 != atemio520 ] + xinsmod /lib/modules/vfd.ko + echo ** AAF ** + startFrontpanel + echo [start.sh] [first] startFrontpanel [start.sh] [first] startFrontpanel + [ -e /lib/modules/clk.ko ] + echo [start.sh] [first] init frontpanel [start.sh] [first] init frontpanel + xinsmod /lib/modules/boxtype.ko + [ -e /lib/modules/simu_button.ko ] + xinsmod /lib/modules/simu_button.ko + [ ufs910 != atemio520 ] + startEvremote + echo [start.sh] [first] startEvremote titan ufs910 [start.sh] [first] startEvremote titan ufs910 + [ ufs910 = atemio520 ] + read var + echo [start.sh] [first] 14W boxtype [start.sh] [first] 14W boxtype + echo [start.sh] [first] init lircd [start.sh] [first] init lircd + mkdir -p /var/run/lirc + /usr/bin/lircd /var/etc/autostart/start.sh: line 1: /usr/bin/lircd: not found + xinsmod /lib/modules/button.ko + xinsmod /lib/modules/led.ko + startSetLeds + fp_control -l 1 1 + /bin/evremote2 Model: 'ufs910' vBoxType: 2 Input device name: "TDT RC event driver" Selected Remote: Ufs910 14Watt RemoteControl RemoteControl Map: MENU - 54 - 139 MENU_FRONT - 49 - 139 RED - 6D - 398 GREEN - 6E - 399 YELLOW - 6F - 400 BLUE - 70 - 401 EXIT - 55 - 102 EXIT_FRONT - 4B - 102 TEXT - 3C - 388 EPG - 4C - 365 REWIND - 21 - 168 FASTFORWARD - 20 - 208 PLAY - 38 - 207 PAUSE - 39 - 119 RECORD - 37 - 167 STOP - 31 - 128 STANDBY - 0C - 116 STANDBY_FRONT - 48 - 116 MUTE - 0D - 113 CHANNELUP - 1E - 104 CHANNELDOWN - 1F - 109 VOLUMEUP - 10 - 115 VOLUMEDOWN - 11 - 114 INFO - 0F - 358 OPTIONS_FRONT - 47 - 138 OK - 5C - 352 UP - 58 - 103 RIGHT - 5B - 106 DOWN - 59 - 108 LEFT - 5A - 105 0BUTTON - 00 - 11 1BUTTON - 01 - 2 2BUTTON - 02 - 3 3BUTTON - 03 - 4 4BUTTON - 04 - 5 5BUTTON - 05 - 6 6BUTTON - 06 - 7 7BUTTON - 07 - 8 8BUTTON - 08 - 9 9BUTTON - 09 - 10 LMENU - D4 - 139 LRED - ED - 398 LGREEN - EE - 399 LYELLOW - EF - 400 LBLUE - F0 - 401 LEXIT - D5 - 102 LTEXT - BC - 388 LEPG - CC - 365 LREWIND - A1 - 168 LFASTFORWARD - A0 - 208 LPLAY - B8 - 207 LPAUSE - B9 - 119 LRECORD - B7 - 167 LSTOP - B1 - 128 LSTANDBY - 8C - 116 LMUTE - 8D - 113 LCHANNELUP - 9E - 104 LCHANNELDOWN - 9F - 109 LVOLUMEUP - 90 - 115 LVOLUMEDOWN - 91 - 114 LINFO - 8F - 138 LOK - DC - 352 LUP - D8 - 103 LRIGHT - DB - 106 LDOWN - D9 - 108 LLEFT - DA - 105 L0BUTTON - 80 - 11 L1BUTTON - 81 - 2 L2BUTTON - 82 - 3 L3BUTTON - 83 - 4 L4BUTTON - 84 - 5 L5BUTTON - 85 - 6 L6BUTTON - 86 - 7 L7BUTTON - 87 - 8 L8BUTTON - 88 - 9 L9BUTTON - 89 - 10 Supports Long KeyPress: 0 connect: No such file or directory error in device initialization + startMountSwap + [ -e /var/swap/.erasemtd ] + [ -e /var/etc/.erasemtd ] + [ ! -e /mnt/swapextensions ] + startHostname + [ -f /etc/hostname ] + hostname -F /etc/hostname + startNetwork + echo [start.sh] [first] startNetwork: start [start.sh] [first] startNetwork: start + iface=eth0 + [ ! -z ] + [ eth0 == eth0 ] + grep -q nfs /proc/cmdline *** InfoBox v1.7 by GOst4711 and nit *** 720x576, 32bpp + [ ufs910 = ufs913 ] + /etc/init.d/networking -i eth0 -s start [networking] start eth0... [networking] eth0 using dhcp udhcpc: started, v1.27.2 udhcpc: sending discover jpg image hight = 753 jpg image width = 1280 udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover udhcpc: sending discover failed... udhcpc: no lease, failing + [ ufs910 = ufs910 ] + echo 1 + echo 10 + echo 0 + startWlan + startReHotplug + [ -e /mnt/network/.recordshare ] + startNtpdate + startSetTime + [ -e /mnt/script/settime.sh ] + startAvs + echo [start.sh] [first] startAvs [start.sh] [first] startAvs + xinsmod /lib/modules/avs.ko + [ ufs910 = ipbox910 ] + startFirmware + echo [start.sh] [first] startFirmware [start.sh] [first] startFirmware + dd if=/dev/zero of=/dev/st231-0 bs=1024 count=4096 4096+0 records in 4096+0 records out 4194304 bytes (4.0MB) copied, 0.074621 seconds, 53.6MB/s + dd if=/dev/zero of=/dev/st231-1 bs=1024 count=4096 4096+0 records in 4096+0 records out 4194304 bytes (4.0MB) copied, 0.076122 seconds, 52.5MB/s + blkid -w+ cut -d :+ grep -m1 SWAP /dev/null -c /dev/null -s LABEL -f1 + FIRMWAREDEV= + [ ! -z ] + readlink /var/swap + echo swappath: + audioelf=/boot/audio.elf + videoelf=/boot/video.elf + [ -e /mnt/swapextensions/bin/video.elf ] + [ -e /var/swap/bin/video.elf ] + [ -e /var/bin/video.elf ] + [ -e /mnt/swapextensions/bin/audio.elf ] + [ -e /var/swap/bin/audio.elf ] + [ -e /var/bin/audio.elf ] + echo [start.sh] [first] load audio firmware (/boot/audio.elf) [start.sh] [first] load audio firmware (/boot/audio.elf) + /bin/ustslave /dev/st231-1 /boot/audio.elf copLoadFile (file /boot/audio.elf) ustslave: Kernel Version: 24 base_address 0x10400000 seeking to 0 seeking to 5f00 seeking to 12320 seeking to 1aa20 seeking to 173100 seeking to 173138 seeking to 173170 seeking to 1b9058 seeking to 1b9060 seeking to 1b9068 seeking to 1b9070 seeking to 1d0920 seeking to 1d0a00 + [ 0 -ne 0 ] + echo [start.sh] [first] load video firmware [start.sh] [first] load video firmware + /bin/ustslave /dev/st231-0 /boot/video.elf copLoadFile (file /boot/video.elf) ustslave: Kernel Version: 24 base_address 0x10000000 seeking to 0 seeking to 432c0 seeking to 59878 seeking to 598b0 seeking to 598e8 seeking to 5f3d8 seeking to 5f3e4 seeking to 5f3f0 seeking to 62664 seeking to 64700 + [ 0 -ne 0 ] + echo video: /boot/video.elf + echo audio: /boot/audio.elf + startPlayer + echo [start.sh] [first] init embx [start.sh] [first] init embx + xinsmod /lib/modules/embxshell.ko + xinsmod /lib/modules/embxmailbox.ko mailbox0=0xb9211000:136:set2 mailbox1=0xb9 212000:137:set2 + xinsmod /lib/modules/embxshm.ko mailbox0=shm:0:7:0x60000000:0:16:16:0:1024:0xa 4000000:0x10000000 + xinsmod /lib/modules/mme_host.ko transport0=shm + xinsmod /lib/modules/mmelog.ko + echo [start.sh] [first] init player 191 [start.sh] [first] init player 191 + xinsmod /lib/modules/mpeg2hw.ko mmeName=MPEG2_TRANSFORMER0 + xinsmod /lib/modules/p2div64.ko + xinsmod /lib/modules/ksound.ko + xinsmod /lib/modules/pseudocard.ko + [ -e /lib/modules/lnb.ko ] + [ -e /lib/modules/frontend_platform.ko ] + [ -e /lib/modules/avl2108_platform.ko ] + xinsmod /lib/modules/cx24116.ko useUnknown=0 + xinsmod /lib/modules/cimax.ko + [ 1 == 1 ] + touch /tmp/.camrouting + [ ufs910 == ufs910 ] + [ 1 ] + xinsmod /lib/modules/pti.ko + xinsmod /lib/modules/stm_monitor.ko + xinsmod /lib/modules/stmsysfs.ko + xinsmod /lib/modules/stmdvb.ko camRouting=1 + xinsmod /lib/modules/player2.ko discardlateframe=0 + xinsmod /lib/modules/sth264pp.ko + xinsmod /lib/modules/stmalloc.ko + xinsmod /lib/modules/platform.ko + xinsmod /lib/modules/silencegen.ko + xinsmod /lib/modules/bpamem.ko + startReader + echo [start.sh] [first] startReader titan ufs910 [start.sh] [first] startReader titan ufs910 + [ -e /lib/modules/smartcard.ko ] + echo+ startAsound + [ -e [start.sh] Thread 3 start [start.sh] Thread 3 start + startPowerLed + startDisplaySystem /usr/bin/amixer ] + echo titan + [ -e /mnt/swapextensions/bin/amixer ] + [ -e /mnt/swap/bin/amixer+ startDownmix + startCEC + startRcreboot + echo [start.sh] [first] start RC-Reboot [start.sh] [first] start RC-Reboot ] + startCheckPIN + [ ufs910 != ufs922 ] + startEmu + startup_progress + progress_skip=1 + [ ufs910 == atemio520 ] + startHotplug + grep rcdev=+ echo [start.sh] [first] start hotplug.sh first titan ufs910 [start.sh] [first] start hotplug.sh first titan ufs910 + /sbin/hotplug.sh first titan ufs910 + cut /mnt/config/titan.cfg -d = -f 2 + RCDEV=/dev/input/event0 + awk+ startFtdi + [ n = -f /etc/init.d/getfb.awk /dev/input/event0 y ] + startPl2303 + [ n = y ] + echo [start.sh] Thread 3 end [start.sh] Thread 3 end BusyBox v1.27.2 (2019-01-24 10:08:05 CET) multi-call binary. Usage: basename FILE [SUFFIX] Strip directory path and .SUFFIX from FILE ln: /media/dvd: File exists + exit [rcS] starting titan rm: can't remove '/tmp/.bootvfd': No such file or directory [titan] copyright by NIT - version 1.91 (44638) [titan] crontribut: obi, gost [titan] box=UFS910 vubox1=0 frameb1=0 [titan] using config: /mnt/config/titan.cfg [titan] error: hypridtunerchoices NULL detect, file=titan.c, func=main, line=673 sh: can't create /proc/stb/fp/wol: nonexistent directory [titan] error: Font /var/usr/share/fonts/free3of9x.ttf failed, file=font.h, func =MyFaceRequester, line=12 [titan] error: FTC_Manager_LookupFace failed. Error: 0x01, file=font.h, func=ope nfont, line=136 [titan] lang: po/de, file=global.h, func=setlang, line=3431 [titan] localepath: /var/usr/local/share/titan, file=global.h, func=initlocale, line=3408 BCM accel interface not available - Inappropriate ioctl for device [titan] error: NULL detect, file=global.h, func=gethypridtunerchoicesvalue, line =6765 jpg image hight = 753 jpg image width = 1280 ------- Programmende [titan] error: open2 frontend failed /dev/dvb/adapter0/frontend1, file=frontendd ev.h, func=feopen, line=825 [titan] error: open2 frontend failed /dev/dvb/adapter0/frontend2, file=frontendd ev.h, func=feopen, line=825 [titan] error: open2 frontend failed /dev/dvb/adapter0/frontend3, file=frontendd ev.h, func=feopen, line=825 [titan] error: can't open /mnt/config/channelslot, err=No such file or directory , file=channelslot.h, func=readchannelslot, line=88 [titan] service.h -> servicestop close all [titan] error: NULL detect, file=audiodev.h, func=audiosetmute, line=225 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [videodev] open devnr: 0 [titan] error: node not found titletext, file=skin.h, func=getscreennode, line=1 220 [titan] failed titletext=system_infos, file=skin.h, func=changetitle, line=4610 pic not found: /var/usr/local/share/titan/skin/default/skin/setdefaultsettings.p ng use default pic: /var/usr/local/share/titan/skin/default/skin/background.png [titan] error: node not found titletext, file=skin.h, func=getscreennode, line=1 220 [titan] failed titletext=Mitteilungen, file=skin.h, func=changetitle, line=4610 [titan] error: node not found titletext, file=skin.h, func=getscreennode, line=1 220 [titan] failed titletext=System Information, file=skin.h, func=changetitle, line =4610 [titan] error: node not found titletext, file=skin.h, func=getscreennode, line=1 220 [titan] failed titletext=Hilfe, file=skin.h, func=changetitle, line=4610 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 sh: can't kill pid 385: No such process [titan] error: read dvb date, file=dvb.h, func=dvbgetdate, line=872 --> check dvbtime[titan] failed titletext=(null), file=skin.h, func=changetitle, line=4610 [titan] File Manager Plugin loadet !!!, file=filemanager.c, func=init, line=25 [titan] Reader Config Plugin loadet !!!, file=readerconfig.c, func=init, line=24 [titan] Streaminfo Plugin loadet !!!, file=streaminfo.c, func=init, line=25 [titan] error: scandir2, err=No such file or directory, file=plugin.h, func=load plugin, line=301 --> check dvbtime[titan] start timer sub thread, file=timerthread.h, func=timert hreadfunc, line=243 [titan] get initial infobar1=infobar, file=infobar.h, func=screeninfobar, line=1 2 [titan] get initial infobar2=infobar2, file=infobar.h, func=screeninfobar, line= 13 [titan] final infobar1=infobar, file=infobar.h, func=screeninfobar, line=26 [titan] final infobar2=infobar2, file=infobar.h, func=screeninfobar, line=28 [start.sh] [last] start + SWTYPE=titan + player=191 + read model + [ -e /var/etc/.firstnet ] [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 + [ ufs910 == ufs922 ] + startMakeDevs + echo [start.sh] [last] startMakeDevs [start.sh] [last] startMakeDevs + [ == 1 ] + startSetled + echo [start.sh] [last] startSetled [start.sh] [last] startSetled + echo B + [ ufs910 != atemio510 ] + [ -e /tmp/.moviedev ] + startCpufreqstop + startSwap + echo [start.sh] [last] startSwap [start.sh] [last] startSwap + [ ! -e /tmp/.swapdirdev ] + swap.sh showInfoDirect titan ufs910 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2 43 [swap.sh] ---- start ---- [swap.sh] showInfoDirect titan ufs910 [titan] error: can't get ip, test with extern tool (atemio.dyndns.tv), file=sock .h, func=get_ip, line=487 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: can't get ip (atemio.dyndns.tv), file=sock.h, func=get_ip, line=4 94 [titan] error: can't get ip, file=sock.h, func=gethttpreal, line=646 [titan] error: can't open /tmp/newsletter.txt, err=No such file or directory, fi le=newsletter.h, func=readnewsletter, line=116 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli tfb2, line=291 [swap.sh] [showInfoDirect] Load ramswap compress/decompress insmod: /lib/modules/lzo1x_compress.ko: module not found insmod: /lib/modules/lzo1x_decompress.ko: module not found /sbin/swap.sh: line 350: sleepms: not found [swap.sh] ---- ende ---- + sleep 10 *** InfoBox v1.7 by GOst4711 and nit *** 720x576, 32bpp [titan] error: read dvb date, file=dvb.h, func=dvbgetdate, line=872 ------- Programmende
Wir verarbeiten personenbezogene Daten über Nutzer unserer Website mithilfe von Cookies und anderen Technologien, um unsere Dienste bereitzustellen, Werbung zu personalisieren und Websiteaktivitäten zu analysieren. Wir können bestimmte Informationen über unsere Nutzer mit unseren Werbe- und Analysepartnern teilen. Weitere Einzelheiten finden Sie in unserer Datenschutzrichtlinie.
Wenn Sie unten auf "Einverstanden" klicken, stimmen Sie unserer Datenschutzrichtlinie und unseren Datenverarbeitungs- und Cookie-Praktiken wie dort beschrieben zu. Sie erkennen außerdem an, dass dieses Forum möglicherweise außerhalb Ihres Landes gehostet wird und Sie der Erhebung, Speicherung und Verarbeitung Ihrer Daten in dem Land, in dem dieses Forum gehostet wird, zustimmen.
Kommentar