X

Nach Update auf 1.88 Fernbedienung ohne Funktion

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • Berti007
    Neuer Benutzer
    • 01.04.2008
    • 6

    Nach Update auf 1.88 Fernbedienung ohne Funktion

    Hallo zusammen,

    nach einem Oneline-Update auf 1.88 reagierte die Box überhaupt nicht mehr auf die Fernbedienung.
    Auch ein Update per USB-Stick führte zu diesem Ergebnis.
    Bin jetzt zurück auf 1.87 und da ist wieder alles in Ordnung.

    Gruß
  • kuro
    Neuer Benutzer
    • 14.01.2008
    • 46

    #2
    FB ohne Funktion hatte ich auch, aber nur bei der 14W Kathi..

    Kommentar

    • Berti007
      Neuer Benutzer
      • 01.04.2008
      • 6

      #3
      Zitat von kuro Beitrag anzeigen
      FB ohne Funktion hatte ich auch, aber nur bei der 14W Kathi..
      Dann dürfte es wohl daran liegen!?
      Bei mir ist es auch die 14W Box

      Kommentar

      • siemie
        Neuer Benutzer
        • 26.04.2011
        • 2

        #4
        Ist bei meiner 14W das gleiche...reagiert weder auf FB-Eingaben, noch auf andere Eingaben mittels Drehrad, Frontbedienung etc... werde nun auch zurück auf 1.87 gehen

        Kommentar

        • AndreasBloechl
          Weltbester Mod Tipper
          • 15.10.2009
          • 40652

          #5
          Auch nach einem harten Neustart durch stromlos nicht? Das habe ich bei einer 510er auch, die fahre ich dann nach dem Update immer mit der tiMote App (Android) runter und dann funktioniert nach dem Neustart auch die FB wieder.
          mfG Andreas
          Go through life with honesty

          Kommentar

          • siemie
            Neuer Benutzer
            • 26.04.2011
            • 2

            #6
            Zitat von AndreasBloechl Beitrag anzeigen
            Auch nach einem harten Neustart durch stromlos nicht? Das habe ich bei einer 510er auch, die fahre ich dann nach dem Update immer mit der tiMote App (Android) runter und dann funktioniert nach dem Neustart auch die FB wieder.
            Habe ich alles probiert, bis auf tiMote. Bin nun auch zurück auf 1.87 und alles läuft wieder.
            Kann es sein, das beim entpacken des updates die Hardwaretreiber nicht mit entpackt wurden? Dies würde das Problem erklären. Werde mir das ggf später noch einmal genauer anschauen

            Kommentar

            • AndreasBloechl
              Weltbester Mod Tipper
              • 15.10.2009
              • 40652

              #7
              Mit OnlineUpdate und 1.88 habe ich auch Probleme, aber wie gesagt an der 510er Atemio. Da wird zum Beispiel das Oscam nicht gefunden und muß von Hand nachinstalliert werden, war bisher noch nie der Fall.
              mfG Andreas
              Go through life with honesty

              Kommentar

              • jensemann72
                Benutzer
                • 07.11.2012
                • 68

                #8
                Hallo,

                habe das online Update gemacht und keinerlei Probleme mit ausfall der FB oder sogar Fehlfunktion - habe allerdings auch mit ner 1W getestet.

                gruß jensemann72

                Kommentar

                • peros
                  Erfahrene Benutzer
                  • 12.01.2008
                  • 177

                  #9
                  FB ohne Funktion hab ich auch, auch bei der 14W Kathi.. Habe online update gemacht auf 1.89 bei einer alten Kiste und keine Fernbedienung. Hab schon die Batterien weggeschmissen und neue eingelegt gehabt. Schade. Vielleicht schaut mal jemand woran es liegt. Zurück zur 1.87 hat geholfen, danke für den Tipp.

                  Kommentar

                  • sirius01
                    Special VIP
                    • 01.02.2008
                    • 1661

                    #10
                    Hallo,


                    gibt es schon eine Lösung für dieses Problem?
                    Mit der aktuellen Software geht es auch nicht.

                    gruß sirius01

                    Kommentar

                    • maikgen
                      Benutzer
                      • 05.01.2008
                      • 67

                      #11
                      scheinbar ist das Problem immer noch habe nach langem mal wieder ein Update gemacht und es geht keine FB mehr. also heißt es zurück auf das 1.87 mal sehen ob ich das irgendwo finde

                      Kommentar

                      • kudok
                        Moderator
                        • 05.04.2008
                        • 35926

                        #12
                        ... ob ich das irgendwo finde ...

                        hier vielleicht:
                        http://atemio.dyndns.tv/nightly-imag...UFS-910/v1-87/


                        Kommentar

                        • obi
                          obi
                          SVN-.....
                          • 04.01.2008
                          • 24587

                          #13
                          ist noch jemand da der das testen kann dann schau ich mal wo es klemmt

                          Kommentar

                          • maikgen
                            Benutzer
                            • 05.01.2008
                            • 67

                            #14
                            also bei mir ist der Fehler immernoch an der 14Watt Version. Würde gern helfen um den Fehler zu beheben, weiß aber leider nicht wie.

                            Kommentar

                            • maikgen
                              Benutzer
                              • 05.01.2008
                              • 67

                              #15
                              Code:
                              In: serial
                              Out: serial
                              Err: serial
                              selected Image to start: ----Flash----
                              
                              no originalsoft detected, trying bootargs_0, if empty trying e2-bootargs...
                              Hit any key to stop autoboot: 0
                              ## Booting image at a0040000 ...
                              Image Name: Linux-2.6.32.71_stm24_0217
                              Image Type: SuperH Linux Kernel Image (gzip compressed)
                              Data Size: 1853915 Bytes = 1.8 MB
                              Load Address: 84001000
                              Entry Point: 84002000
                              Verifying Checksum ... OK
                              Uncompressing Kernel Image ... OK
                              
                              Starting kernel console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.5.105:192.1
                              68.5.14:192.168.5.1:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0
                              x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:00:FF:54:7C:00:0
                              0 init=/bin/devinit - 0x00000000 - 0 ...
                              
                              INIT: version 2.88 booting
                              [rcS] start /etc/init.d/rcS
                              [rcS] booting ATEMIO_M44638_r985_ufs910_titan_update_v1.91
                              [rcS] mount VAR-FLASH (MTD3)
                              [rcS] mount SWAP-FLASH (MTD4)
                              /sbin/mount.sh: line 11: can't create /tmp/autofs.mount.log: Read-only file syst
                              em
                              /sbin/mount.sh: line 12: can't create /tmp/autofs.mount.log: Read-only file syst
                              em
                              /sbin/mount.sh: line 18: can't create /tmp/autofs.mount.log: Read-only file syst
                              em
                              /sbin/mount.sh: line 19: can't create /tmp/autofs.mount.log: Read-only file syst
                              em
                              [AutoFS-MOUNT] check directory pfad muss /autofs not /media/autofs
                              [AutoFS-MOUNT] device: tmpfs
                              [AutoFS-MOUNT] directory: /dev/shm
                              [AutoFS-MOUNT] skip
                              [rcS] start start.sh first titan ufs910 flash stm24
                              [start.sh] [first] start
                              + SWTYPE=titan
                              + player=191
                              + [ -e /var/etc/.firstnet ]
                              + [ ! -e /etc/.usbimg ]
                              + startUsbImage
                              + grep stmfb
                              + lsmod
                              + wc -l
                              + [ 0 -gt 0 ]
                              + [ ! -f /var/etc/.multirun ]
                              + return
                              + startUserSettings+ startDebug
                              + [
                              + [ ! -e /tmp/.init3 ]
                              + -e /mnt/swapextensions ]
                              + [ full = highstartup_progress
                              + progress_skip=1
                              + echo [/var/etc/autostart/start.sh] startUserSettings
                              [/var/etc/autostart/start.sh] startUserSettings
                              ]
                              + cat /mnt/config/smb.conf
                              + wc -l
                              + grep \[global\]
                              + checksmb=1
                              + [ ! -e /mnt/config/smb.conf ]
                              + [ 1 == 0 ]
                              + sed -e 2,/\[/s/\[/|/ -e /|/,$ d -e s/ \+/ /g -e /^$/d -i /mnt/config/smb.conf
                              + echo -e \n
                              + echo [media]
                              + echo comment = Media Files
                              + echo path = /media
                              + echo read only = no
                              + echo public = yes
                              + echo guest ok = yes
                              + cat /etc/.arch
                              + arch=sh4
                              + error=0
                              + [ ! -e /mnt/swapextensions ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/network ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/network/resolv.conf ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/network/hosts ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/network/hostname ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/network/interfaces ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/network/auto.misc ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/network/default_gw ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/network/passwd ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/start-config ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/usercmd.sh ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/usercmd.after.rec.sh ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/titan.cfg ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/rcconfig ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/browserfav ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/hbbtvfav ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/inadyn.conf ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/rcmap ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/stock ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/timers.xml ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/weather ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/smb.conf ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/exports ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/extepg ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/playlist ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/mostzap ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/lastsubtitle ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/skinconfig ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/config/choices ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/settings ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/settings/bouquets.cfg ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/settings/channel ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/settings/provider ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/settings/transponder ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/settings/transponderencoding ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/settings/satellites ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/settings/epgchannel ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/tpk ]
                              + [ 0 = 0 ]
                              + [ ! -e /mnt/script ]
                              + [ sh4 == mipsel ]
                              + [ 0 = 0 ]
                              + [ -e /var/etc/.firststart ]
                              + [ 0 != 0 ]
                              + read model
                              + [ ufs910 == ipbox910 ]
                              + restartET0
                              + ifconfig eth0 up
                              + startSATASwitch
                              + startAutofs
                              + echo [start.sh] Thread 1 start
                              [start.sh] Thread 1 start
                              + startCpufreq
                              + [ -e /lib/modules/cpu_frequ.ko ]
                              + echo [start.sh] [first] start autofs
                              [start.sh] [first] start autofs
                              + rm -f /media/net/*
                              + echo [start.sh] [first] startCpufreq
                              [start.sh] [first] startCpufreq
                              + xinsmod /lib/modules/cpu_frequ.ko
                              + rm -f /media/usb/*
                              + [ -L /var/backup ]
                              + [ -e /var/backup ]
                              + [ -L /var/swapdir ]
                              + [ -e /var/swapdir ]
                              + [ -L /var/swap ]
                              + [ -e /var/swap ]
                              + [ -L /media/hdd ]
                              + [ -e /media/hdd ]
                              + echo [start.sh] [first] start load autofs
                              [start.sh] [first] start load autofs
                              + echo [start.sh] [first] start automount 1
                              [start.sh] [first] start automount 1
                              + /etc/init.d/autofs start
                              Loading autofs
                              Starting autofs
                              + [ 0 -ne 0 ]
                              + startHotplug
                              + echo [start.sh] [first] start hotplug.sh first titan ufs910
                              [start.sh] [first] start hotplug.sh first titan ufs910
                              + /sbin/hotplug.sh first titan ufs910
                              BusyBox v1.27.2 (2019-01-24 10:08:05 CET) multi-call binary.
                              
                              Usage: basename FILE [SUFFIX]
                              
                              Strip directory path and .SUFFIX from FILE
                              ln: /media/dvd: File exists
                              + startConfig
                              + echo [start.sh] [first] startConfig
                              [start.sh] [first] startConfig
                              + pal=pal
                              + hdmi=50:12m
                              + embxmailbox=mailbox0=0xb9211000:136:set2 mailbox1=0xb9212000:137:set2
                              + embxshm=mailbox0=shm:0:7:0x60000000:0:16:16:0:1024 :0xa4000000:0x10000000
                              + display=stx7100.ko
                              + avs=
                              + mmeName=MPEG2_TRANSFORMER0
                              + ci=cimax.ko
                              + front=vfd.ko
                              + tuner=cx24116.ko useUnknown=0
                              + grep -q ^firststart=1 /mnt/config/titan.cfg
                              + titanfirststart=1
                              + grep -q -e ^av_videomode=576i50 -e ^av_videomode=pal /mnt/config/titan.cfg
                              + res=1280x720-32
                              + startFrameBuffer
                              + echo [start.sh] [first] init stmfb
                              [start.sh] [first] init stmfb
                              + xinsmod /lib/modules/stmcore-display-stx7100.ko
                              + FBCHECK=insmod /lib/modules/stmfb.ko display0=1280x720-32@50:12m:pal:rgb:rgb
                              + xinsmod /lib/modules/stmfb.ko display0=1280x720-32@50:12m:pal:rgb:rgb
                              + echo [start.sh] [first] enable HDMI
                              [start.sh] [first] enable HDMI
                              + [ -e /var/etc/.scart ]
                              + echo [start.sh] [first] enable SCART (576i)
                              [start.sh] [first] enable SCART (576i)
                              + res=720x576-32
                              + echo 50:12m
                              + cut -d: -f1
                              + cut -d: -f2
                              + echo 50:12m
                              + hdmi=50i:12m
                              + rmmod stmfb.ko
                              + FBCHECK=insmod /lib/modules/stmfb.ko display0=720x576-32@50i:12m:pal:cvbs
                              + xinsmod /lib/modules/stmfb.ko display0=720x576-32@50i:12m:pal:cvbs
                              + echo insmod /lib/modules/stmfb.ko display0=720x576-32@50i:12m:pal:cvbs
                              + stfbset -p
                              + xinsmod /lib/modules/stm_v4l2.ko
                              + startBootlogo
                              + echo [start.sh] [first] startBootlogo
                              [start.sh] [first] startBootlogo
                              + [ y == y ]
                              + [ -e /mnt/swapextensions/etc/boot/bootlogo.jpg ]
                              + [ -e /var/etc/boot/bootlogo.jpg ]
                              + infobox 200 nobox#/var/etc/boot/bootlogo.jpg+ startVfd
                              + echo [start.sh] [first] startVfd
                              [start.sh] [first] startVfd
                              + xinsmod
                              /lib/modules/e2_proc.ko
                              + [ ufs910 != atemio520 ]
                              + xinsmod /lib/modules/vfd.ko
                              + echo ** AAF **
                              + startFrontpanel
                              + echo [start.sh] [first] startFrontpanel
                              [start.sh] [first] startFrontpanel
                              + [ -e /lib/modules/clk.ko ]
                              + echo [start.sh] [first] init frontpanel
                              [start.sh] [first] init frontpanel
                              + xinsmod /lib/modules/boxtype.ko
                              + [ -e /lib/modules/simu_button.ko ]
                              + xinsmod /lib/modules/simu_button.ko
                              + [ ufs910 != atemio520 ]
                              + startEvremote
                              + echo [start.sh] [first] startEvremote titan ufs910
                              [start.sh] [first] startEvremote titan ufs910
                              + [ ufs910 = atemio520 ]
                              + read var
                              + echo [start.sh] [first] 14W boxtype
                              [start.sh] [first] 14W boxtype
                              + echo [start.sh] [first] init lircd
                              [start.sh] [first] init lircd
                              + mkdir -p /var/run/lirc
                              + /usr/bin/lircd
                              /var/etc/autostart/start.sh: line 1: /usr/bin/lircd: not found
                              + xinsmod /lib/modules/button.ko
                              + xinsmod /lib/modules/led.ko
                              + startSetLeds
                              + fp_control -l 1 1
                              + /bin/evremote2
                              Model: 'ufs910'
                              vBoxType: 2
                              Input device name: "TDT RC event driver"
                              Selected Remote: Ufs910 14Watt RemoteControl
                              RemoteControl Map:
                              MENU - 54 - 139
                              MENU_FRONT - 49 - 139
                              RED - 6D - 398
                              GREEN - 6E - 399
                              YELLOW - 6F - 400
                              BLUE - 70 - 401
                              EXIT - 55 - 102
                              EXIT_FRONT - 4B - 102
                              TEXT - 3C - 388
                              EPG - 4C - 365
                              REWIND - 21 - 168
                              FASTFORWARD - 20 - 208
                              PLAY - 38 - 207
                              PAUSE - 39 - 119
                              RECORD - 37 - 167
                              STOP - 31 - 128
                              STANDBY - 0C - 116
                              STANDBY_FRONT - 48 - 116
                              MUTE - 0D - 113
                              CHANNELUP - 1E - 104
                              CHANNELDOWN - 1F - 109
                              VOLUMEUP - 10 - 115
                              VOLUMEDOWN - 11 - 114
                              INFO - 0F - 358
                              OPTIONS_FRONT - 47 - 138
                              OK - 5C - 352
                              UP - 58 - 103
                              RIGHT - 5B - 106
                              DOWN - 59 - 108
                              LEFT - 5A - 105
                              0BUTTON - 00 - 11
                              1BUTTON - 01 - 2
                              2BUTTON - 02 - 3
                              3BUTTON - 03 - 4
                              4BUTTON - 04 - 5
                              5BUTTON - 05 - 6
                              6BUTTON - 06 - 7
                              7BUTTON - 07 - 8
                              8BUTTON - 08 - 9
                              9BUTTON - 09 - 10
                              LMENU - D4 - 139
                              LRED - ED - 398
                              LGREEN - EE - 399
                              LYELLOW - EF - 400
                              LBLUE - F0 - 401
                              LEXIT - D5 - 102
                              LTEXT - BC - 388
                              LEPG - CC - 365
                              LREWIND - A1 - 168
                              LFASTFORWARD - A0 - 208
                              LPLAY - B8 - 207
                              LPAUSE - B9 - 119
                              LRECORD - B7 - 167
                              LSTOP - B1 - 128
                              LSTANDBY - 8C - 116
                              LMUTE - 8D - 113
                              LCHANNELUP - 9E - 104
                              LCHANNELDOWN - 9F - 109
                              LVOLUMEUP - 90 - 115
                              LVOLUMEDOWN - 91 - 114
                              LINFO - 8F - 138
                              LOK - DC - 352
                              LUP - D8 - 103
                              LRIGHT - DB - 106
                              LDOWN - D9 - 108
                              LLEFT - DA - 105
                              L0BUTTON - 80 - 11
                              L1BUTTON - 81 - 2
                              L2BUTTON - 82 - 3
                              L3BUTTON - 83 - 4
                              L4BUTTON - 84 - 5
                              L5BUTTON - 85 - 6
                              L6BUTTON - 86 - 7
                              L7BUTTON - 87 - 8
                              L8BUTTON - 88 - 9
                              L9BUTTON - 89 - 10
                              Supports Long KeyPress: 0
                              connect: No such file or directory
                              error in device initialization
                              + startMountSwap
                              + [ -e /var/swap/.erasemtd ]
                              + [ -e /var/etc/.erasemtd ]
                              + [ ! -e /mnt/swapextensions ]
                              + startHostname
                              + [ -f /etc/hostname ]
                              + hostname -F /etc/hostname
                              + startNetwork
                              + echo [start.sh] [first] startNetwork: start
                              [start.sh] [first] startNetwork: start
                              + iface=eth0
                              + [ ! -z ]
                              + [ eth0 == eth0 ]
                              + grep -q nfs /proc/cmdline
                              *** InfoBox v1.7 by GOst4711 and nit ***
                              720x576, 32bpp
                              + [ ufs910 = ufs913 ]
                              + /etc/init.d/networking -i eth0 -s start
                              [networking] start eth0...
                              [networking] eth0 using dhcp
                              udhcpc: started, v1.27.2
                              udhcpc: sending discover
                              jpg image hight = 753
                              jpg image width = 1280
                              udhcpc: sending discover
                              
                              udhcpc: sending discover
                              udhcpc: sending discover
                              udhcpc: sending discover
                              udhcpc: sending discover
                              udhcpc: sending discover
                              udhcpc: sending discover
                              udhcpc: sending discover
                              udhcpc: sending discover
                              udhcpc: sending discover
                              failed...
                              udhcpc: no lease, failing
                              + [ ufs910 = ufs910 ]
                              + echo 1
                              + echo 10
                              + echo 0
                              + startWlan
                              + startReHotplug
                              + [ -e /mnt/network/.recordshare ]
                              + startNtpdate
                              + startSetTime
                              + [ -e /mnt/script/settime.sh ]
                              + startAvs
                              + echo [start.sh] [first] startAvs
                              [start.sh] [first] startAvs
                              + xinsmod /lib/modules/avs.ko
                              + [ ufs910 = ipbox910 ]
                              + startFirmware
                              + echo [start.sh] [first] startFirmware
                              [start.sh] [first] startFirmware
                              + dd if=/dev/zero of=/dev/st231-0 bs=1024 count=4096
                              4096+0 records in
                              4096+0 records out
                              4194304 bytes (4.0MB) copied, 0.074621 seconds, 53.6MB/s
                              + dd if=/dev/zero of=/dev/st231-1 bs=1024 count=4096
                              4096+0 records in
                              4096+0 records out
                              4194304 bytes (4.0MB) copied, 0.076122 seconds, 52.5MB/s
                              + blkid -w+ cut -d :+ grep -m1 SWAP
                              /dev/null -c /dev/null -s LABEL
                              -f1
                              + FIRMWAREDEV=
                              + [ ! -z ]
                              + readlink /var/swap
                              + echo swappath:
                              + audioelf=/boot/audio.elf
                              + videoelf=/boot/video.elf
                              + [ -e /mnt/swapextensions/bin/video.elf ]
                              + [ -e /var/swap/bin/video.elf ]
                              + [ -e /var/bin/video.elf ]
                              + [ -e /mnt/swapextensions/bin/audio.elf ]
                              + [ -e /var/swap/bin/audio.elf ]
                              + [ -e /var/bin/audio.elf ]
                              + echo [start.sh] [first] load audio firmware (/boot/audio.elf)
                              [start.sh] [first] load audio firmware (/boot/audio.elf)
                              + /bin/ustslave /dev/st231-1 /boot/audio.elf
                              copLoadFile (file /boot/audio.elf)
                              ustslave: Kernel Version: 24
                              base_address 0x10400000
                              seeking to 0
                              seeking to 5f00
                              seeking to 12320
                              seeking to 1aa20
                              seeking to 173100
                              seeking to 173138
                              seeking to 173170
                              seeking to 1b9058
                              seeking to 1b9060
                              seeking to 1b9068
                              seeking to 1b9070
                              seeking to 1d0920
                              seeking to 1d0a00
                              + [ 0 -ne 0 ]
                              + echo [start.sh] [first] load video firmware
                              [start.sh] [first] load video firmware
                              + /bin/ustslave /dev/st231-0 /boot/video.elf
                              copLoadFile (file /boot/video.elf)
                              ustslave: Kernel Version: 24
                              base_address 0x10000000
                              seeking to 0
                              seeking to 432c0
                              seeking to 59878
                              seeking to 598b0
                              seeking to 598e8
                              seeking to 5f3d8
                              seeking to 5f3e4
                              seeking to 5f3f0
                              seeking to 62664
                              seeking to 64700
                              + [ 0 -ne 0 ]
                              + echo video: /boot/video.elf
                              + echo audio: /boot/audio.elf
                              + startPlayer
                              + echo [start.sh] [first] init embx
                              [start.sh] [first] init embx
                              + xinsmod /lib/modules/embxshell.ko
                              + xinsmod /lib/modules/embxmailbox.ko mailbox0=0xb9211000:136:set2 mailbox1=0xb9
                              212000:137:set2
                              + xinsmod /lib/modules/embxshm.ko mailbox0=shm:0:7:0x60000000:0:16:16:0:1024:0xa
                              4000000:0x10000000
                              + xinsmod /lib/modules/mme_host.ko transport0=shm
                              + xinsmod /lib/modules/mmelog.ko
                              + echo [start.sh] [first] init player 191
                              [start.sh] [first] init player 191
                              + xinsmod /lib/modules/mpeg2hw.ko mmeName=MPEG2_TRANSFORMER0
                              + xinsmod /lib/modules/p2div64.ko
                              + xinsmod /lib/modules/ksound.ko
                              + xinsmod /lib/modules/pseudocard.ko
                              + [ -e /lib/modules/lnb.ko ]
                              + [ -e /lib/modules/frontend_platform.ko ]
                              + [ -e /lib/modules/avl2108_platform.ko ]
                              + xinsmod /lib/modules/cx24116.ko useUnknown=0
                              + xinsmod /lib/modules/cimax.ko
                              + [ 1 == 1 ]
                              + touch /tmp/.camrouting
                              + [ ufs910 == ufs910 ]
                              + [ 1 ]
                              + xinsmod /lib/modules/pti.ko
                              + xinsmod /lib/modules/stm_monitor.ko
                              + xinsmod /lib/modules/stmsysfs.ko
                              + xinsmod /lib/modules/stmdvb.ko camRouting=1
                              + xinsmod /lib/modules/player2.ko discardlateframe=0
                              + xinsmod /lib/modules/sth264pp.ko
                              + xinsmod /lib/modules/stmalloc.ko
                              + xinsmod /lib/modules/platform.ko
                              + xinsmod /lib/modules/silencegen.ko
                              + xinsmod /lib/modules/bpamem.ko
                              + startReader
                              + echo [start.sh] [first] startReader titan ufs910
                              [start.sh] [first] startReader titan ufs910
                              + [ -e /lib/modules/smartcard.ko ]
                              + echo+ startAsound
                              + [ -e [start.sh] Thread 3 start
                              [start.sh] Thread 3 start
                              + startPowerLed
                              + startDisplaySystem
                              /usr/bin/amixer ]
                              + echo titan
                              + [ -e /mnt/swapextensions/bin/amixer ]
                              + [ -e /mnt/swap/bin/amixer+ startDownmix
                              + startCEC
                              + startRcreboot
                              + echo [start.sh] [first] start RC-Reboot
                              [start.sh] [first] start RC-Reboot
                              ]
                              + startCheckPIN
                              + [ ufs910 != ufs922 ]
                              + startEmu
                              + startup_progress
                              + progress_skip=1
                              + [ ufs910 == atemio520 ]
                              + startHotplug
                              + grep rcdev=+ echo [start.sh] [first] start hotplug.sh first titan ufs910
                              [start.sh] [first] start hotplug.sh first titan ufs910
                              + /sbin/hotplug.sh first titan ufs910
                              + cut /mnt/config/titan.cfg
                              -d = -f 2
                              + RCDEV=/dev/input/event0
                              + awk+ startFtdi
                              + [ n = -f /etc/init.d/getfb.awk /dev/input/event0
                              y ]
                              + startPl2303
                              + [ n = y ]
                              + echo [start.sh] Thread 3 end
                              [start.sh] Thread 3 end
                              BusyBox v1.27.2 (2019-01-24 10:08:05 CET) multi-call binary.
                              
                              Usage: basename FILE [SUFFIX]
                              
                              Strip directory path and .SUFFIX from FILE
                              ln: /media/dvd: File exists
                              + exit
                              [rcS] starting titan
                              rm: can't remove '/tmp/.bootvfd': No such file or directory
                              [titan] copyright by NIT - version 1.91 (44638)
                              [titan] crontribut: obi, gost
                              [titan] box=UFS910 vubox1=0 frameb1=0
                              [titan] using config: /mnt/config/titan.cfg
                              [titan] error: hypridtunerchoices NULL detect, file=titan.c, func=main, line=673
                              
                              sh: can't create /proc/stb/fp/wol: nonexistent directory
                              [titan] error: Font /var/usr/share/fonts/free3of9x.ttf failed, file=font.h, func
                              =MyFaceRequester, line=12
                              [titan] error: FTC_Manager_LookupFace failed. Error: 0x01, file=font.h, func=ope
                              nfont, line=136
                              [titan] lang: po/de, file=global.h, func=setlang, line=3431
                              [titan] localepath: /var/usr/local/share/titan, file=global.h, func=initlocale,
                              line=3408
                              BCM accel interface not available - Inappropriate ioctl for device
                              [titan] error: NULL detect, file=global.h, func=gethypridtunerchoicesvalue, line
                              =6765
                              jpg image hight = 753
                              jpg image width = 1280
                              ------- Programmende
                              [titan] error: open2 frontend failed /dev/dvb/adapter0/frontend1, file=frontendd
                              ev.h, func=feopen, line=825
                              [titan] error: open2 frontend failed /dev/dvb/adapter0/frontend2, file=frontendd
                              ev.h, func=feopen, line=825
                              [titan] error: open2 frontend failed /dev/dvb/adapter0/frontend3, file=frontendd
                              ev.h, func=feopen, line=825
                              [titan] error: can't open /mnt/config/channelslot, err=No such file or directory
                              , file=channelslot.h, func=readchannelslot, line=88
                              [titan] service.h -> servicestop close all
                              [titan] error: NULL detect, file=audiodev.h, func=audiosetmute, line=225
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [videodev] open devnr: 0
                              [titan] error: node not found titletext, file=skin.h, func=getscreennode, line=1
                              220
                              [titan] failed titletext=system_infos, file=skin.h, func=changetitle, line=4610
                              pic not found: /var/usr/local/share/titan/skin/default/skin/setdefaultsettings.p
                              ng
                              use default pic: /var/usr/local/share/titan/skin/default/skin/background.png
                              [titan] error: node not found titletext, file=skin.h, func=getscreennode, line=1
                              220
                              [titan] failed titletext=Mitteilungen, file=skin.h, func=changetitle, line=4610
                              [titan] error: node not found titletext, file=skin.h, func=getscreennode, line=1
                              220
                              [titan] failed titletext=System Information, file=skin.h, func=changetitle, line
                              =4610
                              [titan] error: node not found titletext, file=skin.h, func=getscreennode, line=1
                              220
                              [titan] failed titletext=Hilfe, file=skin.h, func=changetitle, line=4610
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              sh: can't kill pid 385: No such process
                              [titan] error: read dvb date, file=dvb.h, func=dvbgetdate, line=872
                              --> check dvbtime[titan] failed titletext=(null), file=skin.h, func=changetitle,
                              line=4610
                              [titan] File Manager Plugin loadet !!!, file=filemanager.c, func=init, line=25
                              [titan] Reader Config Plugin loadet !!!, file=readerconfig.c, func=init, line=24
                              
                              [titan] Streaminfo Plugin loadet !!!, file=streaminfo.c, func=init, line=25
                              [titan] error: scandir2, err=No such file or directory, file=plugin.h, func=load
                              plugin, line=301
                              --> check dvbtime[titan] start timer sub thread, file=timerthread.h, func=timert
                              hreadfunc, line=243
                              [titan] get initial infobar1=infobar, file=infobar.h, func=screeninfobar, line=1
                              2
                              [titan] get initial infobar2=infobar2, file=infobar.h, func=screeninfobar, line=
                              13
                              [titan] final infobar1=infobar, file=infobar.h, func=screeninfobar, line=26
                              [titan] final infobar2=infobar2, file=infobar.h, func=screeninfobar, line=28
                              [start.sh] [last] start
                              + SWTYPE=titan
                              + player=191
                              + read model
                              + [ -e /var/etc/.firstnet ]
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              + [ ufs910 == ufs922 ]
                              + startMakeDevs
                              + echo [start.sh] [last] startMakeDevs
                              [start.sh] [last] startMakeDevs
                              + [ == 1 ]
                              + startSetled
                              + echo [start.sh] [last] startSetled
                              [start.sh] [last] startSetled
                              + echo B
                              + [ ufs910 != atemio510 ]
                              + [ -e /tmp/.moviedev ]
                              + startCpufreqstop
                              + startSwap
                              + echo [start.sh] [last] startSwap
                              [start.sh] [last] startSwap
                              + [ ! -e /tmp/.swapdirdev ]
                              + swap.sh showInfoDirect titan ufs910
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [titan] start timer sub thread, file=timerthread.h, func=timerthreadfunc, line=2
                              43
                              [swap.sh] ---- start ----
                              [swap.sh] showInfoDirect titan ufs910
                              [titan] error: can't get ip, test with extern tool (atemio.dyndns.tv), file=sock
                              .h, func=get_ip, line=487
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: can't get ip (atemio.dyndns.tv), file=sock.h, func=get_ip, line=4
                              94
                              [titan] error: can't get ip, file=sock.h, func=gethttpreal, line=646
                              [titan] error: can't open /tmp/newsletter.txt, err=No such file or directory, fi
                              le=newsletter.h, func=readnewsletter, line=116
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [titan] error: ioctl STMFBIO_BLT, err=Invalid argument, file=sh4port.h, func=bli
                              tfb2, line=291
                              [swap.sh] [showInfoDirect] Load ramswap compress/decompress
                              insmod: /lib/modules/lzo1x_compress.ko: module not found
                              insmod: /lib/modules/lzo1x_decompress.ko: module not found
                              /sbin/swap.sh: line 350: sleepms: not found
                              [swap.sh] ---- ende ----
                              + sleep 10
                              *** InfoBox v1.7 by GOst4711 and nit ***
                              720x576, 32bpp
                              [titan] error: read dvb date, file=dvb.h, func=dvbgetdate, line=872
                              ------- Programmende
                              ich hoffe das dir das reicht das ist der Bootlog von der Version 1.91 und da geht keine FB. mit der Recordtaste bekommt man aber das 1.87
                              wieder drauf.

                              Kommentar

                              Nicht konfiguriertes PHP-Modul

                              Einklappen

                              Nach Update auf 1.88 Fernbedienung ohne Funktion

                              Einklappen
                              Lädt...
                              X