X

IP-Cam hinzufügen

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • stulle
    Special VIP
    • 20.02.2008
    • 952

    IP-Cam hinzufügen

    Hallo Gost,
    ich hatte >hier< darum gebeten, einen neuen Typ hunzuzufügen, weil meine Kamera mit allen Einstellungen im Plugin kein Bild liefert.

    Die Kamera ist eine AV2255PMIR von Arecont Vision

    Telnet/Putty bei einer UFS913 mit
    Code:
    wget --output-document=/tmp/instar1.jpg http://admin:xxxxx@192.168.2.55/image
    schreibt ein Foto nach /tmp
    Bitte beachten! Hinter .../image darf noch ein ? und dahinter können einzelne Steuerbefehle mit =... aufgeführt werden.

    Ein Bewegtbild wird im FF mit
    h.tp://admin:xxxxx@192.168.2.55/mjpeg
    angezeigt, ob dies auch mit dem Plugin geht?

    Mir reicht aber die Anzeige als Fotoschnappschuss (TorKamera), nur müsste dann im Plugin eine variable Zeiteinstellung (z.B. 1,2,4,6 Sekunden) für eine Bildaktualisierung eingefügt werden. So änlich wird es auch bei der Fritzbox gemacht. Das Bild wird mir nach ein paar sec im FritzFon angezeigt wenn jemand am Tor den Klingelknopf betätigt. (Steuerung über Türsprechstelle a/B)
    Desweiteren würde ich mir wünchen, dass bei Anruf nicht nur der Callmonitor sondern auch das Bild der Kamera angezeigt wird aber nur bei einer zugeortneten Nummer/Internnummer.

    stulle
    Mutant HD51 SPF-107H
    AX HD61 SPF-87H
    AX HD60, Kathrein UFS913 und UFS912, Edision-Mini
    Astra-Eutel 13,19,23,28 Multischalter-DiSEqC und Unicable
  • GOst4711
    .....
    • 01.01.2008
    • 19651

    #2
    Wenn alles passt sollte es in 40745 realisiert sein.

    Wenn du für Zoom auch ein Web Kommando hast könnte ich das noch rein bauen.

    Über das Bild beim Anruf muß ich mal nachdenken. Ich könnte mir vorstellen das der callmonitor das Kameraplugin bei bestimmten Nummern aufruft. Was wird denn bei dir angezeigt wenn jemand an der Klingel klingelt.

    GOst4711

    Kommentar

    • stulle
      Special VIP
      • 20.02.2008
      • 952

      #3
      kann mich jetzt erst melden, habe städige DSL-Ausfälle

      @Gost, es kommt kein Bild, hier ein log-Auszug, alternate WebIf=on Typ=1...3?

      Code:
      code: 191 - BLUE
      ****         3657 14 ****
      [SEM] UP
      KEY_PRESS - 191 14
      ++++            0 ms ++++
      [ip-cam] Aufruf1: /mnt/swapextensions/usr/local/share/titan/plugins/instar/curl http://admin:xxx@192.168.2.55:80
      [ip-cam] Aufruf2: (null)
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0RC code: 1
      KEY by code: 191 - BLUE
      ****          105 14 ****
      
      100    13    0    13    0     0    573      0 --:--:-- --:--:-- --:--:--  1181
      Not a JPEG file: starts with 0x34 0x30
      ++++           28 ms ++++
      RC code: 1
      KEY by code: 191 - BLUE
      ****          105 14 ****
      ++++           26 ms ++++
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0KEY_RELEASE - 191 00 14 14 CAUSE=Timeout
      ----          134 ms ----
      [SEM] DOWN
      
      100    13    0    13    0     0    737      0 --:--:-- --:--:-- --:--:--  1625
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    639      0 --:--:-- --:--:-- --:--:--  1625
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    670      0 --:--:-- --:--:-- --:--:--  1625
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    584      0 --:--:-- --:--:-- --:--:--  1181
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    671      0 --:--:-- --:--:-- --:--:--  2166
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    488      0 --:--:-- --:--:-- --:--:--  1083
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    555      0 --:--:-- --:--:-- --:--:--  1181
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    668      0 --:--:-- --:--:-- --:--:--  1083
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    622      0 --:--:-- --:--:-- --:--:--  1857
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    549      0 --:--:-- --:--:-- --:--:--  1300
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    783      0 --:--:-- --:--:-- --:--:--  2166
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    475      0 --:--:-- --:--:-- --:--:--   928
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    830      0 --:--:-- --:--:-- --:--:--  2166
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    492      0 --:--:-- --:--:-- --:--:--  1083
      Not a JPEG file: starts with 0x34 0x30
        % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                       Dload  Upload   Total   Spent    Left  Speed
      
        0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
      100    13    0    13    0     0    644      0 --:--:-- --:--:-- --:--:--  1857
      Not a JPEG file: starts with 0x34 0x30
      stulle
      Mutant HD51 SPF-107H
      AX HD61 SPF-87H
      AX HD60, Kathrein UFS913 und UFS912, Edision-Mini
      Astra-Eutel 13,19,23,28 Multischalter-DiSEqC und Unicable

      Kommentar

      • GOst4711
        .....
        • 01.01.2008
        • 19651

        #4
        Type 4, wenn Du 4 nich angeboten bekommst hast du eine alte Version.

        EDIT: Nochmal mein Frage, ob der callmon was anzeigt wenn das Telefoniegerät Türklingel was auslöst.
        Zuletzt geändert von GOst4711; 15.08.2017, 13:50.

        Kommentar

        • stulle
          Special VIP
          • 20.02.2008
          • 952

          #5
          Hallo Gost,
          entschuldige für meine späte Antwort, die Telekom buddelt bei uns, habe jetzt wieder DSL
          Danke dir, es funktioniert,habe soeben die Box aktualisiert, obwohl ich heute Nacht schon auf 40745 aktualisiert hatte

          zum Callmonitor:
          interne Anrufe auf die FritzBox werden ja im Collmoni nicht angezeigt, entweder ich lasse die Box einen Paralellanruf ausführen, aber besser eine Apothekerschaltung funktioniert auch, das ist ja dann wie ein Anruf von draußen (ich habe noch unbekannte Nummern frei). Es bräuchte dann nur eine Nummer aus dem Telefonbuch im Callmonitor eingetragen werden, die dann das Ereigniss auslöst das Cambild zu öffnen.
          Die bessere Lösung wäre aber, am analogen Telefonanschluss wird ja ein Call ausgeführt, dieser Port müsste nur überwacht werden. Keine Ahnung wie man das anstellt. Habe dazu schon mal das IPPF grob durchforstet.

          stulle
          Mutant HD51 SPF-107H
          AX HD61 SPF-87H
          AX HD60, Kathrein UFS913 und UFS912, Edision-Mini
          Astra-Eutel 13,19,23,28 Multischalter-DiSEqC und Unicable

          Kommentar

          • GOst4711
            .....
            • 01.01.2008
            • 19651

            #6
            Hier gehts weiter

            Kommentar

            Nicht konfiguriertes PHP-Modul

            Einklappen

            IP-Cam hinzufügen

            Einklappen
            Lädt...
            X