X

ATEMIO_M37615_r768_ufs910_titan_update_v1.74

Einklappen
 
  • Filter
  • Zeit
  • Anzeigen
Alles löschen
neue Beiträge
  • sirius01
    Special VIP
    • 01.02.2008
    • 1661

    ATEMIO_M37615_r768_ufs910_titan_update_v1.74

    Hallo @all,

    Seit gefühlten Ewigkeiten beschäftige ich mal wieder mit meiner Kathi.

    Nur sind bei der Version ATEMIO_M37615_r768_ufs910_titan_update_v1.74
    keine Onlineupdates verfügbar. Mache ich etwas verkehrt?

    gruß sirius01

    PS.: Ein Update über USB wollte ich vermeiden, da ich ein Swap-Stick verwende

  • sirius01
    Special VIP
    • 01.02.2008
    • 1661

    #2
    hallo

    Ich habe mal das Update mit USB nach Anleitung gemacht.
    Ich habe die aktuelle Version
    genommen

    Und ...................
    Code:
     Board: STb7100-mboard
    
    
    U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)
    
    DRAM:  32 MB
     write time out = 1, clock = 40
     write time out = 1, clock = 40
    Flash: 16 MB
    In:    serial
    Out:   serial
    Err:   serial
    pll0 freq 531
    pll1 freq 399
    Net:   VFD_Driver Init
    VFD_Controller Type : NEW Kathrein VFD
    board_version = 3
    Button_value = 7
    Hit any key to stop autoboot:  0
    ## Booting image at a0030000 ...
       Image Name:   mini U-boot-r1.4
       Image Type:   SuperH Linux Standalone Program (gzip compressed)
       Data Size:    64354 Bytes = 62.8 kB
       Load Address: 84601000
       Entry Point:  84601000
       Verifying Checksum ... OK
       Uncompressing Standalone Application ... OK
    selected Image to start: ----Flash----
    
    trying Image load from USB 0:1
    USB0 SMI Corporation AA04012900007494
    reading miniFLASH.img
    .
    ...........................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................
    
    13402684 bytes read
    USB0 SMI Corporation AA04012900007494
    reading images/miniFLASH.img
    
    
    Board: STb7100-mboard
    
    
    U-Boot 1.1.2 (STLINUX_2_0p1) (Feb 23 2008 - 17:07:31)
    
    DRAM:  32 MB
     write time out = 1, clock = 40
     write time out = 1, clock = 40
    Flash: 16 MB
    In:    serial
    Out:   serial
    Err:   serial
    pll0 freq 531
    pll1 freq 399
    Net:   VFD_Driver Init
    VFD_Controller Type : NEW Kathrein VFD
    board_version = 3
    Button_value = 7
    Hit any key to stop autoboot:  0
    ## Booting image at a0030000 ...
       Image Name:   mini U-boot-r1.4
       Image Type:   SuperH Linux Standalone Program (gzip compressed)
       Data Size:    64354 Bytes = 62.8 kB
       Load Address: 84601000
       Entry Point:  84601000
       Verifying Checksum ... OK
       Uncompressing Standalone Application ... OK
    selected Image to start: ----Flash----
    
    identify failed, trying e2.. or bootargs_0
    ## Booting image at a0040000 ...
       Uncompressing Kernel Image ... OK
    
    Starting kernel console=ttyAS0,115200 root=/dev/mtdblock2 ip=192.168.1.90:192.168.1.3:192.168.1.1:255.255.255.0:kathrein:eth0:off mem=64m coprocessor_mem=4m@0x10000000,4m@0x10400000 rootdelay=0 nwhwconf=device:eth0,hwaddr:00:50:fd:ff:12:34 init=/bin/devinit - 0x00000000 - 0 ...
    
    INIT: version 2.88 booting
    [rcS] start /etc/init.d/rcS
    [rcS] booting ATEMIO_M37615_r768_ufs910_titan_update_v1.74
    [rcS] mount VAR-FLASH (MTD3)
    [rcS] mount SWAP-FLASH (MTD4)
    /sbin/mount.sh: line 11: can't create /tmp/autofs.mount.log: Read-only file system
    /sbin/mount.sh: line 12: can't create /tmp/autofs.mount.log: Read-only file system
    /sbin/mount.sh: line 18: can't create /tmp/autofs.mount.log: Read-only file system
    /sbin/mount.sh: line 19: can't create /tmp/autofs.mount.log: Read-only file system
    [AutoFS-MOUNT] check directory pfad muss /autofs not /media/autofs
    [AutoFS-MOUNT] device: tmpfs
    [AutoFS-MOUNT] directory: /dev/shm
    [AutoFS-MOUNT] skip
    [rcS] start start.sh first titan ufs910 flash stm24
    [/var/etc/autostart/start.sh] startUserSettings
    [start.sh] [first] start autofs
    [start.sh] Thread 1 start
    [start.sh] [first] start inetd
    [start.sh] [first] start load autofs
    [start.sh] [first] start automount 1
    Loading autofs
    Starting autofs
    [start.sh] Thread 1 end
    [start.sh] [first] start hotplug.sh first titan ufs910
    [hotplug.sh] startCheckhanging: start
    Es ist immer noch die alte Version auf der Box. Es hat sich nichts verändert.

    gruß sirius01
    PS.: mit der Hat es geklappt.

    Kommentar

    Nicht konfiguriertes PHP-Modul

    Einklappen

    ATEMIO_M37615_r768_ufs910_titan_update_v1.74

    Einklappen
    Lädt...
    X