root
kathrein
schon probiert geht nicht.
@Einstein
beim start des Recievers fragt es nach Password. stulle hat es ja gelogt und hier eingestellt.
Zitat von stulle Beitrag
Hallo,
Titan läuft auf den Kathreins 910, 922, 912, 913 ohne Probleme. Habe jetzt von einem Kumpel eine Kabelbox bekommen.
Stehe vor dem gleichen Problem, Titan bootet nicht.
hier der ser. Bootlog
Board: STb7100-Mboard (MB411) [29-bit mode]
U-Boot 1.3.1 (Aug 6 2009 - 05:24:37) - stm23-2008-06-03
DRAM: 64 MB
NOR: 16 MB
In: serial
Out: serial
Err: serial
Serial 3 Intialized
VFD_Driver Init
Test Class : GetInstance()
UBootGlue.cpp at TestNimDevice ,555
Checking NIM as DVB-C, LG TDMB G261 ( TDA10023 NXP )
UBootGlue.cpp at TestNimDevice ,563
Found NIM Device
Test Class : GetInstance()
Test Class : GetInstance()
RawBuffer.cpp at RawBuffer ,29
FD = 0
SWRecoveryHandler.cpp at Recover ,46
No Recovery Needed
End of testCpp
Hit any key to stop autoboot: 0
Original bootargs = console=ttyAS0,115200 root=/dev/mtdblock2 ro ip=192.168.2.215:192.168.2.1:192.168.2.1:255.255.2 55.0:kathrein:eth0ff mem=128m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000
ethaddr = 000:55:0C:90:89
new Params = console=ttyAS0,115200 root=/dev/mtdblock2 ro ip=192.168.2.215:192.168.2.1:192.168.2.1:255.255.2 55.0:kathrein:eth0ff mem=128m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:000:55:0C:90:89
## Booting image at a0040000 ...
Image Name: Linux-2.6.32.61_stm24_0215
Created: 2015-06-30 2:18:14 UTC
Image Type: SuperH Linux Kernel Image (gzip compressed)
Data Size: 1815502 Bytes = 1.7 MB
Load Address: 84001000
Entry Point: 84002000
Verifying Checksum ... OK
Uncompressing Kernel Image ... START = 213555
END = 107889
OK
Starting kernel console=ttyAS0,115200 root=/dev/mtdblock2 ro ip=192.168.2.215:192.168.2.1:192.168.2.1:255.255.2 55.0:kathrein:eth0ff mem=128m init=/bin/devinit coprocessor_mem=4m@0x10000000,4m@0x10400000 stmmaceth=ethaddr:000:55:0C:90:89
- 0x00000000 - 0 ...
INIT: version 2.86 booting
[rcS] start /etc/init.d/rcS
[rcS] booting ATEMIO_M35866_r5078_ufc960_titan_update_v1.69
[rcS] mount VAR-FLASH (MTD3)
sh: mount.sh: not found
sh: mounting /dev/mtdblock3 on /var failed: Input/output error
[rcS] mount SWAP-FLASH (MTD4)
/bin/mount.sh: line 11: can't create /etc/mdev/mount.log: Read-only file system
/bin/mount.sh: line 12: can't create /etc/mdev/mount.log: Read-only file system
/bin/mount.sh: line 18: can't create /etc/mdev/mount.log: Read-only file system
/bin/mount.sh: line 19: can't create /etc/mdev/mount.log: Read-only file system
[AutoFS-MOUNT] check directory pfad muss /autofs not /media/autofs
[AutoFS-MOUNT] device: tmpfs
[AutoFS-MOUNT] directory: /dev/shm
/bin/mount.sh: line 74: can't create /etc/mdev/mount.log: Read-only file system
INIT: Entering runlevel: 3/shm failed: No such file or
Passwort:
Login timed out after 60 seconds
Passwort:
Login timed out after 60 seconds
ab hier bleibt die Box hängen, mit UFC960 im Display
Hat überhaupt schon jemand diese Box mit Titan am Laufen?
Zitat ende
genau so sieht es auch bei mir aus.
Kommentar