(See this thread >>http://www.aaf-digital.info/forum/sh...blem-auf-Astra )
Thanks to GOst4711's titan-plugin-ufs910-highsrtreiber_0.3_sh4 for Hotbird I managed to get those channels free from fractures and perfectly working.
After the conversion of my Dreambox settings to Titan for the satellites 13,19,23 and 28, TitanNit was working for ALL SD Channels in the CanalDigitaal bouquet on Astra 23,5
Trying the HD Channels resulted in exact the same images I had experienced before with Das Erste HD and ZDF HD etc. on Astra 19,2
Starting with a perfect picture then withing 5 minutes getting pixelized untill complete unrecognizable.
Not all channels behaved in the same way however.
The channels (see list below) with FEC 2/3 all start from perfect image to degraded and all the other ones with FEC 5/6 are completely disturbed and not recognizable from first start and after waiting too long a restart is needed.
I made a short list of the channels with the troubles:
Freq Pol Sym Rate FEC SID TSID NID Type
11856000 V 27500000 5/6 QPSK 7035 3208 3 25 Ned 1HD
11739000 V 27500000 2/3 8PSK 6080 3202 3 25 Ned 2HD
12187500 H 27500000 5/6 QPSK 21040 3225 3 25 NED 3HD
11856000 V 27500000 5/6 QPSK 7020 3208 3 35 RTL4HD
11739000 V 27500000 2/3 8PSK 6090 3202 3 25 SBS6HD
12187500 H 27500000 5/6 QPSK 21015 3225 3 25 RTL5HD
12187500 H 27500000 5/6 QPSK 21010 3225 3 25 RTL7HD
11856000 V 27500000 5/6 QPSK 7036 3208 3 25 RTL8HD
12187500 H 27500000 5/6 QPSK 21020 3225 3 25 NET5HD
12129000 V 27500000 2/3 8PSK 20955 3222 3 25 Film1 Premiere HD
12187500 H 27500000 5/6 QPSK 21035 3225 3 25 VeronicaHD
11856000 V 27500000 5/6 QPSK 7015 3208 3 25 NGC-HD
11856000 V 27500000 5/6 QPSK 7010 3208 3 25 Discovery HD
11739000 V 27500000 2/3 8PSK 6092 3202 3 25 EDL1 HD
As the behaviour of the receiver is the same as before on the Astra 19 HD channels without IPK, I was wondering if it would be possible to fix that with a specific 'Alternativ-Treiber for Astra 23,5' instead of this Hotbird driver.
In fact I put all my hope on GOst4711 who built all the other alternative drivers.
If more information is required please let me know. (in German is OK)
PS
Additional Information:
After changing HB IPK 0.3 to HB IPK 0.5, there was no change on the FEC 5/6 channels, but all the FEC 2/3 channels couldn't be found anymore.