High sr 30000 channels not working

[kanon]

Hi

thanx for the great new image.Finally my ufs910 can be in use again . though i got 2 bugs ive found, All Hd channels from scandinavia with high sr 30000 not working, i can see picture but its all blurry. The second thing is subtitling pids are wrong on teletext subs. It shows same pid for all countries, and that pid is not correct either. Dvb subtitling is working perfect.
But overall this image works like a charm

greetings

kanon

[Sofatester]

I think there is an option for HighSR in /var/etc/autostart/start-config (don't know surely because at the moment I'm at work)

[kanon]

Yeah i changed it to y, but still same. I think this has been a bug since stm24 was introduce, as stm22 is all good. Same with bpanther neutrino, stm22 ok , stm24 not.

edit: bpanther works with the latest i tested, though only for 10 min and then the picture starts shaking
UFS-910 - Kernel 2.6.32.59_stm24_0211
BPantherImage[USB]-rev4453-p191

[kanon]

subtitling bugs

I was little bit to quick saying dvb subs is perfect. The text hangs like for 20 sec before it goes away, seems strange bcz then it also showing text into commercial break.

[kanon]

With Ghost ipk file . high sr channels can be watched, though same problems as on bpanther and the gm990, picture starts shaking after a while.

Ive made a screenshot of how teletext subs looks like, notice it says they are all running ? and they all show same pid 153, that is also wrong pid.

[GOst4711]

I look at the Driver again. Probably on Wednesday.

GOst4711

[konfetti]

I look at the Driver again. Probably on Wednesday.

GOst4711

In the dvbapi5 version the following code for ufs910 is still missing:

#if defined(UFS910) /* use this unless UFS910 is not defined */
  if (state->dcur.symbol_rate >= 30000000)  
  {
     ctrl_outl(reg | 0xF ,reg_tsm_config + TS_1394_CFG);
  }
  else
  {
     ctrl_outl(reg | 0x14 ,reg_tsm_config + TS_1394_CFG);
  }
#endif

I think we should clarify if the not dvbapi5 version is still needed and if so we should merge all the stuff and remove one version.

[GOst4711]

Hallo Konfetti,

es fehlt auch für die UFS910 folgendes
#ifdef UFS910
// useUnknown leads to very bad reception on 910
static short useUnknown = 0;

Ich wollte das am Wochende einbauen, war mir aber zu stressig, aus dem Grund hab ich erstmal als alternative den Treiber vor api5 genommen. Nun können die Problemboxen auf jeden Fall mal wieder HD schauen.
highsr funktioniert aber damit auch nicht obwohl die Abfrage drin ist.


GOst4711

[fredda88]

Any ideas about how to get the subtitles running?

[api]

"High SR 30000 channels not working"
very old problem, and 24 STM images, e2, titanium, neutrino.
The last operation of the AAF M.C. Spring image was one I use now.

If this can not be resolved, the kathy goes into the soup.

[GOst4711]

Habt Ihr mal die Treiber hier getestet. Versucht bitte mal als erstes die Version 0.5.

[api]

Thank you!
* The driver should cx24116.ko original, no-ipk, of e2 don't cry image can try if you can.
Rubbish polyols tend not to flash ...

[GOst4711]

Das "don't cry image" hat meiner Meinung nach einen anderen Kernel, da passt der Treiber von mir nicht. Du kannst das ipk mit 7-Zip entpacken.

GOst4711

[api]

Alternativ treiber mit 0.8W HD SR30000 Channel.
Copy "var" und reboot.

[GOst4711]

Bestand denn das Problem noch? Ich dachte eigentlich das es bereits gelöst war.